• Wind and Structures
• /
• 제7권5호
• /
• pp.345-357
• /
• 2004

In the 1990s, four strong typhoons hit the Kyushu area of Japan and inflicted severe damage on power transmission facilities, houses, and so on. Maximum gust speeds exceeding 60 m/s were recorded in central Kyushu. Although the wind speeds were very high, the gust factors were over 2.0. No meteorological stations are located in mountainous areas, creating a deficiency of meteorological station data in the area where the towers were damaged. Since 1995 the authors have operated a network for wind measurement, NeWMeK, that measures wind speed and direction, covering these mountainous areas, segmenting the Kyushu area into high density arrays. Maximum gusts exceeding 70 m/s were measured at several NeWMeK sites when Typhoon Bart (1999) approached. The gust factors varied widely in southerly winds. The mean wind speeds increased due to effects of the local terrain, thus further increasing gust speeds.

• 천문학회보
• /
• 제38권1호
• /
• pp.38.2-38.2
• /
• 2013

Galaxy clusters, the largest gravitationally bound systems, are an important means to place constraints on cosmological models and study the evolution and formation of galaxies and their large scale distribution. We report results from our study of galaxy clusters in the European Large Area ISO Survey North1(ELAIS-N1) field, covering a sky area of 8.75 $deg^2$. We combine multi-wavelength data from the UKIRT Infrared Deep Sky Survey Deep Extragalactic Survey (UKIDSS DXS, JK bands), Spitzer Wise-area InfraRed Extragalactic survey (SWIRE, Optical-Infrared bands), and CFHT (z band). The photometric redshifts are derived from these datasets and are used to search for high redshift galaxy cluster candidates. Finally, we provide new candidates of galaxy clusters at redshifts 1.0

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.179-180
• /
• 2006

The real time monitoring of the power systems covering wide area are essential for the stable operation and control of the power system. Synchronized phasor measurement is a key for the precise monitoring and control of the power systems. In this paper, to suggest an appropriate network topology of Power Infrastructure Defense System(PIDS) and to estimate the maximum network bandwidth with using the network analyzer, we simulate a PIDS and analyze the network traffic.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2006년도 한국약용작물학회 공동춘계학술발표회
• /
• pp.224-225
• /
• 2006

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.616-623
• /
• 2006

As we have understood the commonly launched T-DMB service from December 2005, we kindly recommend to apply LCX cable installing solution which can be covering underground subway and tunnel T-DMB signal shadow area with most efficient network implementation method. Subway passengers would be enjoyable continuous T-DMB services through LCX cable installing solution.

• 기술사
• /
• 제45권6호
• /
• pp.37-43
• /
• 2012

Every year in Europe, soils covering an area larger than the city of Berlin are lost to urban sprawl and transport infrastructure. Soil sealing causes an irreversible loss of the biological functions of soil. As water can neither infiltrate nor evaporate, water runoff increases, sometimes leading to catastrophic floods. Landscapes are fragmented and habitats become too small or too isolated to support certain species. In addition, the food production potential of land is lost forever. There is an urgent need to use this valuable resource more wisely, in order to secure its many vital services for future generations. The EU faces new territorial challenges.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.45-50
• /
• 2012

폭렬은 철근노출과 함께 구조부재의 단면을 감소시키며, 이로 인하여 구조적 거동에 심각한 문제를 발생시킨다. 고강도 콘크리트에 내화 모르터를 피복함으로서 화재시 폭렬을 방지할 수 있으며, 콘크리트 내의 철근의 온도상승을 지연시킬 수 있다. 본 연구의 목적은 이러한 고강도 콘크리트의 내화피복재로 활용하기 위한 것으로 퍼라이트와 폴리프로필렌 섬유로 경량 모르터를 제조하여 온도이력 성상을 파악하는데 있다. 이에 따른 실험인자로는 폴리프로필렌 섬유의 첨가량과 길이이다. 연구결과 폴리프로필렌 섬유를 첨가함으로서 모르터의 공극구조를 변화시킬 수 있었으며, 이는 내부 온도상승을 지연시킨다. 또한 고강도 콘크리트의 내화피복재로서 경량 모르터를 사용할 수 있는 가능성을 확인하였다.

• 의료법학
• /
• 제8권2호
• /
• pp.9-35
• /
• 2007

The Health care program in Korea has now been systemized after 30 years of declaring the inauguration of the national health insurance system by the current government. The national health care covering all Korean citizens was achieved after 12 years of implementing the national health insurance and the health care program since 1977. Hundreds of multiple operational agencies managing the insured individually had undergone the amalgamation process from 1998 to 2000, and had been restructured as one agency, the National Health Insurance Corporation. In 2003, the community/area based financial management was also merged together with the employment based financial management. The National health care system of Korea offer various merits, compared with that of other countries, such as health care provision covering all Koreans, low insurance premium, accessibility of medical services/facilities etc. However, there are still some weak features which need to be addressed for improvement; below expectation insurance cover system, mistrust on the medical services, low medical charges resulted from excessive restrictions, and unstable financial status of the national health insurance etc. Therefore, the National health care system should continue to evolve to re-establish itself as more effective national health care system by further strengthening its merits, and by improving its weaknesses; with adopting the positive system to optimize the costs of prescribed medicines/drugs, applying simpler insurance coverage system to calculate the optimum medical charges, promoting private medical insurances, and increasing insurance premium etc.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.119-126
• /
• 2004

Generally, reinforced concrete is one of the most commonly used structural materials and it prevents corrosion of steel bar by high pH of interior, But, as time elapsed, reinforced concrete structure become deteriorated by many of combined deterioration factors and environmental conditions. And, there are large number of deteriorate mechanism of the reinforced concrete structure and it acts complexly. It is recognized that steel bar corrosion is the main distress behind the present concern regarding concrete durability. In this study, to institute combined deterioration environments, established acceleration condition and cycle for combined deterioration environments has a resemblance to environments which are real structures placed. After that to confirm corrosion properties of reinforced concrete due to permeability with covering depth and types of surface cover under combined deterioration environments, measured carbonation velocity coefficients, chloride ion diffusion coefficients, water absorption coefficients, air permeability coefficients and electric potential, corrosion area ratio, weight reduction, corrosion velocity of steel bar. The results showed that an increase in age also decrease carbonation velocity coefficients, increase Chloride ion diffusion coefficients and increases water absorption coefficients. As well, an increase in age also increases corrosion of steel bar. Data on the development of corrosion velocity of steel bar with types of surface cover made with none, organic B, organic A, inorganic B, and inorganic A is shown. As well, permeability and corrosion velocity of steel bar with covering depth is superior to 10mm than 20mm. And it is confirmed permeability and corrosion properties of steel bar are closely related.

• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.48.1-48.13
• /
• 2018

Objectives: To analyze the influence of thickness and incisal extension of indirect veneers on the stress and strain generated in maxillary canine teeth. Materials and Methods: A 3-dimensional maxillary canine model was validated with an in vitro strain gauge and exported to computer-assisted engineering software. Materials were considered homogeneous, isotropic, and elastic. Each canine tooth was then subjected to a 0.3 and 0.8 mm reduction on the facial surface, in preparations with and without incisal covering, and restored with a lithium disilicate veneer. A 50 N load was applied at $45^{\circ}$ to the long axis of the tooth, on the incisal third of the palatal surface of the crown. Results: The results showed a mean of $218.16{\mu}strain$ of stress in the in vitro experiment, and $210.63{\mu}strain$ in finite element analysis (FEA). The stress concentration on prepared teeth was higher at the palatal root surface, with a mean value of 11.02 MPa and varying less than 3% between the preparation designs. The veneers concentrated higher stresses at the incisal third of the facial surface, with a mean of 3.88 MPa and a 40% increase in less-thick veneers. The incisal cover generated a new stress concentration area, with values over 48.18 MPa. Conclusions: The mathematical model for a maxillary canine tooth was validated using FEA. The thickness (0.3 or 0.8 mm) and the incisal covering showed no difference for the tooth structure. However, the incisal covering was harmful for the veneer, of which the greatest thickness was beneficial.