• Journal of Gastric Cancer
• /
• v.19 no.2
• /
• pp.225-233
• /
• 2019

Purpose: Gastric adenocarcinoma of the fundic gland type (chief cell predominant type) (GA-FG-CCP) was first reported as a rare adenocarcinoma found in the normal fundic mucosa. Recent studies have proposed the possibility that GA-FG-CCPs were also generated in the atrophic mucosa after Helicobacter pylori (HP) eradication therapy. However, little is known on the endoscopic findings of GA-FG-CCP generated in the atrophic mucosa due to its extreme rarity. Materials and Methods: A total of 8 patients who underwent endoscopic submucosal resection and were diagnosed with GA-FG-CCP generated in the HP-uninfected mucosa (4 cases, HP-uninfected group) or HP-eradicated atrophic mucosa (4 cases, HP-eradicated group) were retrospectively analyzed, and their endoscopic findings, including magnifying endoscopy with narrow band imaging (M-NBI), and pathological features were compared. Results: While GA-FG-CCPs in the 2 groups displayed similar macroscopic appearance, M-NBI demonstrated that characteristic microvessels (tapered microvessels like withered branches) were specifically identified in the HP-eradicated group. Pathological investigation revealed that a decreasing number of fundic glands and thinned foveolar epithelium covering tumor ducts were thought to lower the thickness of the covering layer over tumor ducts in the HP-eradicated group. Moreover, dilation of vessels just under the surface of the lesions contributed to the visualization of microvessels by M-NBI. Conclusions: The change in background mucosa due to HP infection influenced the thickness of the covering layer over the tumor ducts and M-NBI finding of GA-FG-CCP.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.190-199
• /
• 1992

Ultrasonic Spectroscopy technique, covering a wide frequency range, is one of the powerful Nondestructive Evaluation method for detection of microdefects and thickness measurement of thin film below the linit of ultrasonic distance resolution in various types of masterials and composites, provides a useful information that connot be obtained by a conventional measuring system using a single frequency. Results of computer simulation of multiple reflection wave were applied for particular cases : measurements of thickness and Ultrasonic wave velocities propagating normal to the surface in Acryle thin films can be evaluted by using the interference phenomenon, even dimensions of interest are smaller than the ultrasonic wavelength. The repeatability of the thickness measurement in 0.28 mm thin film was 10$\^$-3/.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.429-432
• /
• 2006

In this study a board was made with good fireproof materials of which test was conducted according to the fireproof test for KS F 2257 construction members, and the temperature in coated steel which has a possibility to explode with concrete surface was measured. It is not appropriate to use normal mortar or mortar covering mixed with P.P. fiber to take a measure to prevent the explosive splalling of high-strength concrete. To finalize an Al-Si (aluminosilicates) board-requires over 30mm in thickness at the minimum for the required fire resistance performance and explosion prevention.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.167-172
• /
• 2022

The analytical results are presented for the mass transfer in a cylindrical pore covering from the macroscale, multiscale to nanoscale owing to the variation of the inner diameter of the pore. When the thickness h_bf of the physically adsorbed layer potentially fully formed on the pore wall is comparable to but less than the inner radius R₀ of the pore, the multiscale flow occurs consisting of both the nanoscale non-continuum adsorbed layer flow and the macroscopic continuum liquid flow; When R₀ ≤ h_bf, the flow in the whole pore is essentially non-continuum; When R₀ is far greater than h_bf, the flow in the whole pore can be considered as macroscopic and continuum and the adsorbed layer effect is negligible.

• Current Research on Agriculture and Life Sciences
• /
• v.24
• /
• pp.23-27
• /
• 2006

Seedling characteristics of rice on nursery covered with different weight of polypropylene spunbonded fabric(PSF) were investigated to determine the optimum thickness of PSF for raising of healthy rice seedlings. Four different thickness of PSF 40, 60, 80 and $100g/m^2$ were used in the seedling nursery with a conventional polyethylene(PE) film. PSF and PE were taken off in 20 days after sowing(DAS) on April and in 10 DAS on June. Plant height of 20- and 30- day old seedlings in PSF covering nursery was slightly taller as the increase of PSF thickness from $40g/m^2$ to $100g/m^2$, but number of leaves and shoot dry-weight of the seedlings was reduced. Root solidity of seedlings grown in lighter PSF ($40{\sim}60g/m^2$) covering nursery was more favorable than that in relatively heavier PSF($80{\sim}100g/m^2$). The optimum thickness of PSF for the raising of healthy seedlings was $40{\sim}60g/m^2$ PSF at sowing on April 20 and April 30 for single cropping, and $40g/m^2$ PSF on June for double cropping based on the growth characteristics of seedlings investigated at seedling nursery covered with different thickness of PSF.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.11a
• /
• pp.9-13
• /
• 2007

• Advances in materials Research
• /
• v.9 no.4
• /
• pp.265-287
• /
• 2020

A theoretical method to predict the interfacial stresses in the adhesive layer of reinforced concrete beams strengthened with porous FRP plate is presented in this paper. The effect due to porosity is incorporated utilizing a new modified rule of mixture covering the porosity phases. The adherend shear deformations have been included in the present theoretical analyses by assuming a linear shear stress through the thickness of the adherends. Remarkable effect of the porosity has been noted in the results. Indeed, the resulting interfacial stresses concentrations are considerably smaller than those obtained by other models which neglect the porosity effect. It was found that the interfacial stresses are highly concentrated at the end of the FRP plate, the minimization of the latter can be achieved by using porous FRP plate in particular at the end. It is also shown that the interfacial stresses of the RC beam increase with volume fraction of fibers, but decrease with the thickness of the adhesive layer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.118-122
• /
• 2000

An extensive investigation has been made for the possible utilization of polypropylene spunbonded fabrics in rice seedling nursery. Considering the cropping systems available in southern part of Korea, sowing dates were fixed at April 5 and April 20 for single cropping and May 6 and May 26 for double cropping. Nursery period was fixed to 35 days for each sowing date. Four different thickness of polypropylene spunbonded fabrics, 40, 60, 80, 100 g/$m^2$, were tested in rice seedling nursery. The temperature and light intensity were not significantly different among the thickness of polypropylene spunbonded fabrics. Light intensity was significantly reduced in polypropylene spunbonded fabric (72.2 Klux) compared with polyethylene mm (85.5 Klux), however, the reduced light intensity was enough for seedling growth. The temperature in the polypropylene spunbonded fabric covering during low air temperature was higher than that in polyethylene mm tunnel. At transplanting, the rice seedlings grown in polypropylene spunbonded fabric condition was shorter (17cm) but healthier than those in polyethylene mm (23cm). The estimated possible nursery periods using the polypropylene spunbonded fabric covering may start from April 1 at Chinju (plain area in Southern Korea, 20m altitude) and April 15 at Susang (mountainous area, 430m altitude). Labour hours and cost were reduced by about 28% and 48%, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.67-71
• /
• 2008

The study analyzed on fire resistance of high strength concrete followed by thickness of fireproof plaster board and change of adhesive method. In spalling characteristics after fire resistance test, all four-side covering concretes were left out of testing screens. Thus, serious spalling was happened by exposing their internal reinforcing rods. in partial testing screens, spalling was happened till the internal concrete of main reinforcing rod. Only, temperature history didn't have special differences among changes of adhesive method. However, thickness of fireproof plaster board is very important. Namely, mock member reinforcing 25mm general adhesive + Bending was 583℃ in the highest temperature of surface part and 479℃ in the highest temperature of the main reinforcing rod, which was relatively good temperature history.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.3-3
• /
• 1998

The atmospheric corrosIOn properties of Zinc (Zn) under wet/dry transition of $H_20$ film were investigated in this study. The atmospheric corrosion of metal is usually occurred as a result of repetitious thickness transition (so called wet/dry transition) of liquid phase which is covering the metal surface. Corrosion potential and the polarization behaviour of Zn during liquid film thickness transition were measured by Kelvin probe method which IS using vibrating reference electrode without touching the liquid film. The oxidized states of Zn as a result of successive wet/dry transition were also investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results show that the corrosion potential and the corrosIOn rate of Zn both are increasing during drying. However, the corrOSIon rate is decreasing again when the Zn surface is completely dried while the corrosion potential still remains high. This behaviour can be explained by the polarization behaviour change of Zn according to the $H_20$ film thickness change. The completely dried surface is consisted mostly with Zn and ZnO phases. After a number of cycles of wet/dry transition, however, the oxidized Zn phase of ${\varepsilon}-Zn(OH)_2$, which has rather voluminous and defected structure, were found.