• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.903-909
• /
• 2018

In December 2017, the world's first LTE-R for 250km/h high-speed railway was commercialized with the opening of Wonju-Gangneung high-speed railway. LTE-R has many advantages such as voice and video call, high-speed data transmission, coverage redundancy and DU redundancy. But it requires efficient use of radio resources because of a limited bandwidth of 10MHz for UL and DL, respectively. The existing unicast scheme has limited high frequency efficiency so when the number of users increases, service is limited due to the network load, which could be a problem for LTE-R in terms of stability and reliability. On the other hand, the multicast scheme via eMBMS can provide stable service even if the number of video users is high. This paper derives the number of unicast scheme users considering the LTE-R network with LAB test and calculation result, and proposes implementation plans and considerations for eMBMS commercialization on LTE-R.

• Journal of Internet Computing and Services
• /
• v.7 no.5
• /
• pp.43-57
• /
• 2006

Next-generation mobile communication systems evolve in the form of high speed data transmission along with integration of wired-wireless network. Therefore, it needs researches on integrating service to heterogeneous networks to offer high speed data transmission and various services while supporting user mobility. In existing studies, heterogeneous networks are linked to single core network separatively, Since vertical handoff between heterogeneous networks leads to some delay, packets may be lost during vertical handoff. To solve this problem, this paper proposes an hierarchically integrated network architecture considering the characteristics of CDMA2000, WiBro, and WLAN. The hierarchically integrated networks are overlaid according to coverage of each network. Therefore, the proposed architecture can minimize handoff delay and packet loss. In addition, this paper proposes an integrated framework for next generation mobile communication networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.709-730
• /
• 2017

To address the challenge of unprecedented growth in mobile data traffic, ultra-dense network deployment is a cost efficient solution to offload the traffic over some small cells. The overlapped coverage areas of small cells create more than one candidate access points for one mobile user. Signal strength based user association in IEEE 802.11 results in a significantly unbalanced load distribution among access points. However, the effective bandwidth demand of each user actually differs vastly due to their different preferences for mobile applications. In this paper, we formulate a set of non-linear integer programming models for joint user association control and user demand guarantee problem. In this model, we are trying to maximize the system capacity and guarantee the effective bandwidth demand for each user by soft-association control with a software defined network controller. With the fact of NP-hard complexity of non-linear integer programming solver, we propose a Kernighan Lin Algorithm based graph-partitioning method for a large-scale network. Finally, we evaluated the performance of the proposed algorithm for the edge users with heterogeneous bandwidth demands and mobility scenarios. Simulation results show that the proposed adaptive soft-association control can achieve a better performance than the other two and improves the individual quality of user experience with a little price on system throughput.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.1
• /
• pp.39-50
• /
• 2001

Vanadium based solid solution alloys have been studied as a potential negative electrode of Ni/MH battery due to their high hydrogen storage capacity. In order to improve the kinetic property of V-Ti alloy in KOH electrolyte, the ball-milling process with Ni, which has a catalytic effect of hydrogen absorption/desorption, was carried out to modify the surface properties of V-Ti-Cr alloys with high hydrogen storage capacity. Moreover, to overcome the problem of poor cycle life, V-Ti alloy substituted by Cr, V0.68 Ti0.20 Cr0.12, has been developed showing a good cycle performance (keeping about 80 % of initial discharge capacity after 200 cycles). The cycle life of surface-modified V0.68 Ti0.20 Cr0.12 alloy was improved by suppressing the formation of TiO2 layer on the alloy surface while decreasing the amount of dissolved vanadium in the KOH electrolyte. In order to promote the effect of Ni coating on the surface property of V0.68 Ti 0.20 Cr 0.12 alloy by ball-milling, filamentary-typed Ni, which has higher surface coverage area than sphere-typed Ni was used as a surface modifier. Consequently, the surface-modified V0.68 Ti0.20 Cr0.12 alloy electrode showed a improved discharge capacity of 460 mAh/g.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.664-673
• /
• 2014

This paper analyzes the power allocation scheme to maximize the sum-rate for heterogeneous networks based on asynchronous time division duplex. We consider heterogeneous networks where a small cell exists in the macro cell coverage and the small cell and the macro cell share the same time-frequency resources. We formulate the optimization problem which maximizes the sum-rate of the heterogeneous network subject to the target signal-to-interference-plus-noise ratio. We analyze the feasible region in order for the optimal solution to exists and the optimal power allocation scheme for maximizing the sum-rate. Simulation results show that the proposed power allocation schemes outperform the maximum power transmission scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.654-663
• /
• 2014

Heterogeneous network (HetNet) with the various types of cells, e.g., with the different cell size and transmit power, has been introduced to improve the cell coverage and areal capacity in cellular mobile communication system. In this paper, we consider a practical situation in which all cells share the same wireless resource while some of them have a limited backhaul capacity. More specifically, we formularize a cell association problem that utilizes the minimum wireless resource while satisfying the quality of service (QoS) of all users in terms of their transmission time constraint, and propose a distributed algorithm to find the optimal solution. In the event of bottleneck at the backhaul link in some small cells, the proposed algorithm off-loads some users to the adjacent cell with the less congested backhaul capacity. Finally, we verify that the proposed algorithm supports the more numbers of users to satisfy the specified level of QoS than the conventional user association scheme under the limited access and backhaul capacities.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2014

In these days, along with the extreme popularity of online social network services, it becomes an important problem understanding the role of social network in the research of message dissemination. Past studies of message dissemination over online social network services mostly consider the coverage of message dissemination and the methods to maximize it. But, these works lack of the consideration of the impact of multi channel social network, which has multiple communication channel with distinct properties of message transfer and various users with distinct channel preferences. In this paper, the new message dissemination model over multi-modal multi-channel social network, the Delay Weighted Independent Cascade Model, is proposed. The proposed model considers various channels including online social network service, email, SMS messaging, phone and mouth-to-mouth and their distinct message transfer properties. In order to consider the various user properties, the different value of probability of forwarding a message and the different preference of communication channel is considered. Moreover, the proposed model considers the distribution of user location and allows to analyze the properties of message dissemination under various scenarios. Based on the proposed model, a message dissemination simulator is generated and the message disseminations on various scenarios are analyzed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.6
• /
• pp.205-212
• /
• 2003

Because a wireless ad hoc network does not have fixed infrastructure, a call admission control approach researched in a wireless network is not feasible to this network. In this paper, we propose call admission control scheme to support this problem and the burst handoff traffic due to group mobility in a wireless ad hoc network. This scheme is an adaptive guard channel scheme which adapt the number of guard channels in each MBS(mobile base station) according to the current estimate of the potential handoff call rate derived from the number of ongoing calls within the coverage area of an MBS that initiate group handoff in a wireless ad hoc network. Our simulation studies are performed for comparisons of the proposed scheme with the other channel allocation schemes. Simulation results show that the proposed scheme efficiently reduces handoff call blocking probability in wireless ad hoc networks.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.139-156
• /
• 2001

Speech intelligibility in patients with complete dentures is an important clinical problem depending on the material used. The objective of this study was to investigate the speech of two edentulous subjects fitted with a complete maxillary prosthesis made of two different palatal materials: chrome-cobalt alloy and acrylic resin. Three patients with complete dentures in the experiment group and ten people in the controls groups participated in the experiment. CSL, Visi-Pitch were used to measure speech characteristics. The test words consisted of a simple vowel /e/, meaningless three syllabic words containing fricative, affricated and stops sounds, and sustained fricative sounds /s/ and /$\int$/. The analysis speech parameters were vowel and lateral formants, VOT, sound durations, sound pressure level and fricative frequency. Data analysis was conducted by a series of paired T-test. The findings like the following: (1) Vowel formant one of patients with complete denture is higher than that of the control group (p<0.05), while lateral formant three of patients with complete denture is lower than that of the control group (p<0.0l). (2) Patients with complete denture produced lower speech intelligibility with low fricative frequency (/$\int$/) than control group (p<0.0). The speech intelligibility of patients with metal prosthesis was higher than that of those with resin prosthesis (p<0.05). (3) Fricative, lateral and stop sound durations of patients with complete denture were longer than those of the control group (p<0.01 and p<0.05), respectively. Total sound durations of patients with metal prosthesis were similar to that of the control group (p<0.05), while those with resin prosthesis had a shorter duration (p<0.01). This implied that those with metal prosthesis had higher speech intelligibility than those with resin prosthesis. (4) Patients with complete denture had higher sound pressure levels /t/ and /c/ than the control group (p<0.01). However, sound pressure levels for /c/ of patients with metal prosthesis or resin prosthesis was similar to the control group (p<0.05). (5) Patients with complete denture had higher fundamental frequency than the control group (p<0.01).

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.44-53
• /
• 1999

Generating diagnostic test patterns for combinational circuits remain to be a very difficult problem. For example, ISCAS85 c7552 benchmark circuit has 100 million fault pairs, Thus, we need more sophisticated algorithm to get more information. A new diagnostic algorithm for test pattern generation is suggested and implemented in this paper. DIATEST algorithm based on PODEM is also implemented for comparison to the new algorithm. These two algorithms have been applied to ISCAS85 benchmark circuits. Experimental results show that (1) both algorithms achieve fault pair coverage over 99%, (2) total test length of the new algorithm is much shorter than that of DIATEST, and (3) the new algorithm gives much more information used for making diagnostic dictionary, diagnostic decision tree or diagnostic test system despite DIATEST is faster than the new algorithm.