• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.3940-3955
• /
• 2023

A new method of numerical simulating prediction and decontamination effect evaluation for abrasive jet decontamination to radioactively contaminated metal is proposed. Based on the Computational Fluid Dynamics and Discrete Element Model (CFD-DEM) coupled simulation model, the motion patterns and distribution of abrasives can be predicted, and the decontamination effect can be evaluated by image processing and recognition technology. The impact of three key parameters (impact distance, inlet pressure, abrasive mass flow rate) on the decontamination effect is revealed. Moreover, here are experiments of reliability verification to decontamination effect and numerical simulation methods that has been conducted. The results show that: ⁶⁰Co and other homogeneous solid solution radioactive pollutants can be removed by abrasive jet, and the average removal rate of Co exceeds 80%. It is reliable for the proposed numerical simulation and evaluation method because of the well goodness of fit between predicted value and actual values: The predicted values and actual values of the abrasive distribution diameter are Ф57 and Ф55; the total coverage rate is 26.42% and 23.50%; the average impact velocity is 81.73 m/s and 78.00 m/s. Further analysis shows that the impact distance has a significant impact on the distribution of abrasive particles on the target surface, the coverage rate of the core area increases at first, and then decreases with the increase of the impact distance of the nozzle, which reach a maximum of 14.44% at 300 mm. It is recommended to set the impact distance around 300 mm, because at this time the core area coverage of the abrasive is the largest and the impact velocity is stable at the highest speed of 81.94 m/s. The impact of the nozzle inlet pressure on the decontamination effect mainly affects the impact kinetic energy of the abrasive and has little impact on the distribution. The greater the inlet pressure, the greater the impact kinetic energy, and the stronger the decontamination ability of the abrasive. But in return, the energy consumption is higher, too. For the decontamination of radioactively contaminated metals, it is recommended to set the inlet pressure of the nozzle at around 0.6 MPa. Because most of the Co elements can be removed under this pressure. Increasing the mass and flow of abrasives appropriately can enhance the decontamination effectiveness. The total mass of abrasives per unit decontamination area is suggested to be 50 g because the core area coverage rate of the abrasive is relatively large under this condition; and the nozzle wear extent is acceptable.

• 농업과학연구
• /
• 제49권4호
• /
• pp.809-819
• /
• 2022

This study was conducted to improve the stability of cut slopes of forest roads in granitic weathered soil areas. The study area is a national forest road (road length 28.48 km) in Pyeongchang-gun, Gangwon-do. After data collection, a statistical analysis was performed using IBM SPSS (Ver. 26.0). First, the correlation analysis showed that structure, slope position, soil erosion, slope, and aspect (N, S) were correlated with vegetation coverage (p < 0.05). Elapsed years, slope distance, and aspect (E, W) were found to have no correlation with vegetation coverage. (p > 0.05) Second, one-way ANOVA and Kruskal-Wallis test results showed that vegetation coverage was worse when the slope was located at the top or the middle of the slope than at the bottom of the slope. In addition, the site with sheathing and gabions showed good vegetation coverage when compared with the site without structures. In the case of soil erosion, areas with severe damage and moderate damage showed worse vegetation coverage. Therefore, it is necessary to strengthen the slope angle of the cut soil of the granitic weathered soil area from 1 : 0.5 - 1.2 to 1 : 0.8 - 1.5. In addition, structures such as sheathing and gabions should be installed on granitic weathered land.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.17-24
• /
• 2006

We consider the sensor location problem (SLP) on a given sensor field. We present the sensor field as grid of points. There are several types of sensors which have different detection ranges and costs. If a sensor is placed in some point, the points inside of its detection range can be covered. The coverage ratio decreases with distance. The problem we consider in this thesis is called multiple-type differential coverage sensor location problem (MDSLP). MDSLP is more realistic than SLP. The coverage quantities of points are different with their distance form sensor location in MDSLP. The objective of MDSLP is to minimize total sensor costs while covering every sensor field. This problem is known as NP-hard. We propose a new integer programming formulation of the problem. In comparison with the previous models, the new model has a smaller number of constraints and variables. This problem has symmetric structure in its solutions. This group is used for pruning in the branch-and-bound tree. We solved this problem by branch-and-cut(B&C) approach. We tested our algorithm on about 60 instances with varying sizes.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.325-331
• /
• 2017

Purpose: There is active research that improves both reliability and fatigue life of structures which widely used in the aerospace fields of defense industry. The effects of three parameters (pressure, peening time, nozzle distance) on Almen intensity and coverage will be investigated by using the experimental and analyzed data. Methods: we employed a Box-Behnken design. Additionally, to verify the validity of the optimal condition obtained from experimental results, metallurgical analyses of the shot-peened aerospace part were conducted with respect to surface morphology, residual stress. Results: Optimal shot peening condition is determined as (distance, pressure, time) by optimizing simultaneously the two responses of intensity and coverage. At the optimal peening condition the prediction interval for Almen intensity is well within the required range. And, the validity of the condition was checked by using the real aerospace aluminum alloy plate. Conclusion: Shot peening introduces significant levels of compressive residual stress and induces improves both reliability and fatigue life of structures.

• Industrial Engineering and Management Systems
• /
• 제13권1호
• /
• pp.29-42
• /
• 2014

Extensive research has been conducted on supplier evaluation and selection as a strategic and crucial component of supply chain management in recent years. However, few articles in the previous literature have been dedicated to the use of fuzzy inference systems as an aid in decision-making. Therefore, this essay attempts to demonstrate the application of this method in evaluating suppliers, based on a comprehensive framework of qualitative and quantitative factors besides the effect of gradual coverage distance. The purpose of this study is to investigate the applicability of the numerous measures and metrics in a multi-objective optimization problem of the supply chain network design with the aim of managing the allocation of orders by coordinating the production lines to satisfy customers' demand. This work presents a dynamic non-linear programming model that examines the important aspects of the strategic planning of the manufacturing in supply chain. The effectiveness of the configured network is illustrated using a sample, following which an exact method is used to solve this multi-objective problem and confirm the validity of the model, and finally the results will be discussed and analyzed.

• Journal of the Optical Society of Korea
• /
• 제19권5호
• /
• pp.514-520
• /
• 2015

This paper presents a novel shore-to-sea maritime data transmission system based on time-code diversity, using visible light in maritime environments to overcome the limitations of conventional maritime wireless communications. The proposed system is primarily comprised of existing LED-based lighthouses and maritime transceivers (marine beacons, buoys, etc.), and thus is considered cost-effective in terms of implementation. We first analyze maritime visible-light communications on the basis of the unique properties of a maritime environment, i.e. sea states (wave height, wind speed, etc.), plus atmospheric turbulence, using the Pierson-Moskowitz (PM) and JONSWAP (JS) spectrum models. It is found that the JS model outperforms the PM model, and that the coverage distance depends on the LED power and sea states. To combat maritime fading conditions that significantly degrade performance and coverage distance, we propose a time-code diversity (TCD) scheme in which the delayed versions of the original data are retransmitted using orthogonal Walsh codes. This TCD scheme is found to be superior, in that it offers three orders of magnitude in terms of BER performance, compared to a conventional (non-TCD) transmission scheme. The proposed scheme is robust and efficient in overcoming the effect of impairments present in maritime environments with a BER of approximately $10^{-5}$and a data rate of 100 Kbps at a distance of 1 km.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권11호
• /
• pp.463-468
• /
• 2017

모바일 노드를 이용하여 넓은 범위를 센싱하기 위해서는 노드 배치의 균일성이 매우 중요한 이슈 중 하나이다. 본 논문에서는 희소 모바일 애드 혹 네트워크 환경에서 빅 데이터 센싱을 위한 커버리지 문제에 대한 주제를 다룬다. 커버리지 문제에 관한 기존 연구에서는 넓은 범위를 센싱하기 위해 노드의 수가 충분히 많은 환경을 가정하였다. 하지만 희소 모바일 애드 혹 네트워크 환경에서 센서 커버리지 문제는 노드들 간의 센싱 범위가 겹치는 범위를 최소화하기 위해 노드들 간의 거리가 충분히 멀어야 한다. 따라서 본 논문에서는 희소 모바일 애드 혹 네트워크 환경에서 센서 커버리지 문제를 정의하고 중앙 중재자 없이 자가 조직의 방식에 의한 해결 방안을 제시한다. 실험 결과를 통해 제안하는 방식은 커버리지 영역과 에너지 소비 관점에서 효율적임을 보인다.

• 한국통신학회논문지
• /
• 제34권1A호
• /
• pp.41-49
• /
• 2009

무선 센서 네트워크의 노드들은 제한된 배터리 에너지 자원으로 운용되고, 사용자로부터 원거리 또는 산악지대와 같이 배터리 교체가 쉽지 않은 곳에 배치되기 때문에 한정된 에너지를 효율적으로 사용하는 기술이 매우 중요하다. 이를 위해 여러 가지 프로토콜들이 연구되어 왔는데, 특히 wakeup 스케줄링 프로토콜은 가장 효과적이고 실용적인 기법으로 간주되어 왔다. Wakeup 스케줄링 프로토콜에서는 같은 지역에 대해 중복되게 센싱하고 있는 노드들이 있다면 적정한 수의 노드만 활동하게 하고 나머지는 활동하지 않게 함으로써 전체적인 네트워크의 에너지 사용 효율을 높일 수 있다. 본 논문은 무선 센서 네트워크에서 관심지역을 중복하여 센싱하는 노드의 수를 최소화하면서 응용에서 요구하는 센싱 커버리지 수준을 유지하는 wakeup 스케줄링 프로토콜을 제안한다. 제안된 프로토콜은 이웃 노드와의 가중 평균거리를 이용하여 작동여부를 결정하게 되며 네트워크의 상황에 따라 wakeup 할 수 있는 기준치를 동적으로 변화함에 따라 요구된 센싱 커버리지를 오랫동안 유지될 수 있도록 해준다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.267-267
• /
• 2010

The continuous change in the electronic band structure of metal-adsorbed bilayer graphene was calculated as a function of metal coverage using first-principles calculations. Instead of modifying the unit cell size as a function of metal coverage, the distance between the metal atoms and bilayer graphene in the same $2{\times}2$ unit unit cell was controlled to change the total charges transferred from the metal atoms to bilayer graphene. The validity of the theoretical method was confirmed by reproducing the continuous change in the electronic band structure of K-adsorbed epitaxial bilayer graphene, as shown by Ohta et al. [Science 313, 951 (2006)]. In addition, the changes in the electronic band structures of undoped, n-type, and p-type bilayer graphene were studied schematically as a function of metal coverage using the theoretical method.

• 정보처리학회논문지C
• /
• 제16C권4호
• /
• pp.535-542
• /
• 2009

무선센서네트워크는, 다수의 센서노드가 넓은 지역에 배치되어 자신의 전원에 의해 동작하고 다른 센서노드와 협력하여 환경검침 또는 물리량 검침을 수행하는 무선네트워크로 정의한다. 각각의 센서노드들은 자신의 배터리전원소모를 최소화하여, 장기간 사용할 수 있어야 하며, 센서 노드를 적절하게 배치하여 전체 네트워크 커버리지를 제공할 수 있어야 무선센서네트워크의 수명을 늘일 수 있다. 초기 센서노드의 배치로는 센서들의 배터리 수명 등의 이유로 제약이 있으며, 모바일센서노드는 센서가 이동하여 새로운 커버리지를 제공함으로써, 이러한 제약조건을 완화할 수 있다. 본 논문에서는 perimeter coverage property를 만족하는 모바일 센서들의 단계적인 이동을 통한 커버리지 제공기법을 제안한다. 각각의 모바일 센서노드들은 이웃한 센서노드들이 dead 노드인지 판단하게 되며, dead 노드인 경우, 센서네트워크의 커버리지 hole을 만드는지 여부를 판단한 후, 각각의 모바일 센서노드들은 hole의 중심점을 계산하고, 관련된 센서노드들이 협동하여, 단계적으로이동하여, 최종 hole을 커버하는 새로운 센서네트워크를 형성하게 된다. 본 제안기법을 시뮬레이션하여 DCM 기법과 비교한 결과, 에너지 효율을 결정하는 전체 움직임거리 측면에서 최소 50% 이상의 성능향상을 보임을 확인하였다.