• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.355-362
• /
• 2001

Uniform application of agri-chemicals will improve orchard pest management. An air-blast(orchard) sprayer designed for vineyards has been used: however, few research on the uniformity and coverage of the sprays has been reported. Distributions of spray coverage were measured with artificial targets and analyzed to enhance the efficiency of spray application. A structure was built to place water sensitive papers, sampling spray droplets blasted from the orchard sprayer. The sampling cards were collected from five directions at three distances (2.5, 3.0 and 3.5m) for two fan speeds (2,075 and 3,031 rpm), and analyzed using an image analysis system. The distribution of the coverage percent area did not follow the wind velocity pattern. The coverage by the low fan speed was more uniform and higher than that by the higher fan speed. The coverage percent area decreased with an increase of distance. The distribution of droplet density was similar to that of coverage. However, the coverage contribution by smaller droplets became more significant as the distance increased. The upward blasting distance was limited within 3m, but the limit to the ground level was expanded the distance more than 3.5m because of the concentrated droplets.

• Journal of Periodontal and Implant Science
• /
• 제39권2호
• /
• pp.111-118
• /
• 2009

Purpose: The integrity of interproximal hard/soft tissue has been widely accepted as the key determinant for success or degree of root coverage following the connective tissue graft. However, we reason that the gingival biotype of an individual, defined as the distance from the interproximal papilla to gingiva margin, may be the key determinant that influence the extent of root coverage regardless of traditional classification of gingival recession. Hence, the present study was performed with an aim to verify that individual gingival scalloping pattern inherent from biotype influence the level of gingival margin following the connective tissue graft for root coverage. Methods: Test group consisted of 43 single-rooted teeth from 21 patients (5 male and 16 female patients, mean age: 36.6 years) with varying degrees of gingival recession requiring connective tissue graft; 20 teeth of Miller class I and 23 teeth of Miller class III gingival recession, respectively. The control group consisted of contralateral teeth which did not demonstrate apparent gingival recession, and thus not requiring root coverage. For a biotype determination, an imaginary line connecting two adjacent papillae of a test tooth was drawn. The distance from this line to gingival margin at mid-buccal point and this distance (P-M distance) was designated as "gingival biotype" for a given individual. The distance was measured at baseline and 3 to 6 months examinations postoperatively both in test and control groups. The differences in the distance between Miller class I and III were subject to statistical analysis by using Student.s t-test while those between the test and control groups within a given patient were by using paired t-test. Results: The P-M distance at 3 to 6 months postoperatively was not significantly different between Miller class I and Miller class III. It was not significantly different between the test and control group in a given patient, either, both in Miller class I and III. Conclusions: The amount of root coverage following the connective tissue graft was not dependent on Miller's classification, but rather was dependent on P-M distance, strongly implying that the gingival biotype of a given patient may play a critical impact on the level of gingival margin following connective tissue graft.

• 한국정보과학회논문지:시스템및이론
• /
• 제35권8호
• /
• pp.385-393
• /
• 2008

사용자가 가능한 센서 가까이에서 이동하는 문제를 최단거리유지 문제(Best Coverage Problem)라 하며, 무선 연결의 안정성을 높이기 위해서 두 개의 센서로부터 최대한 가까이 위치하며 움직이는 이동경로를 차선거리유지 경로(Second Best Coverage Path)라고 한다. 이 논문에서는 센서들의 집합 U와 시작점 s, 끝점 t가 주어질 때, s에서 t까지 이르는 모든 경로 중에서, 가장 가까운 두 개의 센서까지 거리 중 큰 값이 최소가 되는 차선거리유지 경로를 찾는 O(n logn)-시간 알고리즘을 제시하며, 차선거리유지 경로를 따라 움직일 때가 최단거리유지 경로를 따라 움직일 때 보다, 네트워크에의 연결이 보다 안정적임을 보여주는 실험결과도 또한 제시한다.

• 응용통계연구
• /
• 제25권3호
• /
• pp.485-501
• /
• 2012

This research is to find a design D that minimizes forecast variance in d dimensions over the candidate space ${\chi}$. We want a robust design since we may not know the specific covariance structure. We seek a design that minimizes a coverage criterion and hope that this design will provide a small forecast variance even if the covariance structure is unobservable. The details of an exchange or swapping algorithm and several properties of the parameters of coverage criterion with the unknown correlation structures are discussed.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.137-150
• /
• 1997

To investigate the feasibility of a boom sprayer in the paddy field, an experimental boom sprayer for both broadcast and directed spraying to the lower part of rice plants was developed. The droplet deposition characteristics of the boom sprayers were experimentally compared to those of power sprayer. Water sensitive papers(WSP) and a machine vision system were used to evaluate the coverage rate and droplet density. It was shown that the broadcast application by the boom sprayer was the best coverage among the tested sprayers. Coverage tate and droplet density were affected by the distance between nozzles and the sprayer ground speed, The best result was obtained when the distance of 30cm and the speed of 1.7km/hr. The directed application showed inconsistency in overall droplet distribution. The inconsistency was judged to be caused by conflict between plants and boom extenders. The power sprayer showed a very wide range of droplet size distribution, relatively larger droplets and inconsistency in cove The power sprayer was judged to be inadequate for the low-volume precision application because of inconsistency in performance and difficulty in adjusting the spraying rate. Based on the droplet coverage characteristics, it was concluded that the self-propelled boom sprayer for the broadcast application was feasible for an alternative to the power sprayer in case of low volume, precision application in paddy condition.

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.33-42
• /
• 2007

소프트웨어 제품의 정확한 인도시기를 예측하거나 효용성 및 신뢰성을 예측하기 위해서는 소프트웨어 테스팅 과정에서 중요한 요소인 테스트 커버리지를 이용하면 보다 효율적인 테스팅 작업을 할 수 있다. 이런 모형을 ENHPP모형이라고 한다. 본 논문에서는 기존의 소프트웨어 신뢰성 모형인 지수 커버리지 모형과 S-커버리지 모형을 재조명하고 이 분야에 적용될 수 있는 Burr 분포에 기초한 Burr 커버리지 모형을 제안하였다. 고장 간격 시간으로 구성된 자료를 이용한 모수추정 방법은 최우추정법 과 일반적인 수치해석 방법인 이분법을 사용하여 모수 추정을 실시하고 효율적인 모형 선택은 편차자승합(SSE) 및 콜모고로프 거리를 적용하여 모형들에 대한 효율적인 모형선택도 시도하였다. NTDS 자료를 사용한 임무시간 비교 분석한 결과 Burr 커버리지 모형 시행이 지수나 S-형 모형보다 우수함을 보이고 있다. 이 자료들에서 기존의 모형과 Burr 커버리지 모형의 비교를 위하여 산술적 및 라플라스 검정, 편의 검정등을 이용하였다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.316-321
• /
• 2007

The hierarchical covering location problem emphasizes the issue of locating of hierarchical facilities in order to maximize the number of customers that can be covered. In the classical HCLP(Hierarchical Covering Location Problem), it is assumed that the customers are covered completely if they are located within a specific distance from the facility, and not covered otherwise. The generalized HCLP is introduced that the coverage of customers is measured to be any real value rather than 0 or 1, where the service level may decrease according to the distance. Mixed integer programming formulation for the generalized HCLP is suggested with a partial coverage of service. Solutions are found using OPL Studio, and are evaluated for various cases.

• Communications for Statistical Applications and Methods
• /
• 제26권1호
• /
• pp.35-46
• /
• 2019

Multivariate Confidence Region (MCR) cannot be used to obtain the confidence region of the mean vector of multivariate data when the normality assumption is not satisfied; however, the Quantile Confidence Region (QCR) could be used with a Multivariate Quantile Vector in these cases. The coverage rate of the QCR is better than MCR; however, it has a disadvantage because the QCR has a wide shape when the probability density function follows a bimodal form. In this study, we propose a Quantile Confidence Region using the Highest density (QCRHD) method with the Highest Density Region (HDR). The coverage rate of QCRHD was superior to MCR, but is found to be similar to QCR. The QCRHD is constructed as one region similar to QCR when the distance of the mean vector is close. When the distance of the mean vector is far, the QCR has one wide region, but the QCRHD has two smaller regions. Based on these features, it is found that the QCRHD can overcome the disadvantages of the QCR, which may have a wide shape.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2311-2318
• /
• 2007

유한고장수를 가진 비동질적인 포아송 과정에 기초한 모형들에서 잔존 오류 1개당 고장 발생률은 일반적으로 상수, 혹은 단조증가 및 단조 감소 추세를 가지고 있다. 소프트웨어 제품의 정확한 인도시기를 예측하거나 효용성 및 신뢰성을 예측하기 위해서는 소프트웨어 테스팅 과정에서 중요한 요소인 테스트 커버리지를 이용하면 보다 효율적인 테스팅 작업을 할 수 있다. 이런 모형을 ENHPP모형이라고 한다. 본 논문에서는 기존의 소프트웨어 신뢰성 모형인 지수 커버리지 모형과 S-커버리지 모형을 재조명하고 이 분야에 적용될 수 있는 Kappa 분포를 이용한 모형인 Kappa 커버리지 모형을 제안하였다. 고장 간격시간으로 구성된 자료를 이용한 모수추정 방법은 최우추정법과 일반적인 수치해석 방법인 이분법을 사용하여 모수 추정을 실시하고 효율적인 모형 선택은 편차자승합(SSE) 및 콜모고로프 거리를 적용하여 모형들에 대한 효율적인 모형 선택도 시도 하였다. 수치적인 예에서는 실제 고장자료를 통하여 분석하였다 이 자료들에서 기존의 모형과 Kappa 커버리지 모형의 비교를 위하여 산술적 및 라플라스 검정, 편의 검정 등을 이용하였다.

• 농업과학연구
• /
• 제50권3호
• /
• pp.427-435
• /
• 2023

This study was conducted to evaluate the spraying performance according to the flight conditions of agricultural drones for the development of a variable control system. The analyzed flight conditions comprised six factors: spraying direction, flight speed, altitude, wind speed, wind direction, and rotor rotational speed. The ratio of the area sprayed on the water-sensitive paper was used as the coverage, and the distribution and amount of the coverage were evaluated. The coverage distribution based on the distance from the drone was used to evaluate a spray pattern, and the distribution was expressed as a Gaussian function approximation. In addition, the probability distribution based on coverage was expressed as the cumulative probability via Gamma function approximation to analyze the spraying efficiency in the target area. The results showed that the averaged coverage decreased significantly as the flight speed and wind speed increased, and the wind direction changed the spray pattern without a coverage decrease. This study contributes to the development of a control technique for the precision control system of agricultural drones.