• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.58
• /
• pp.61-70
• /
• 2006

In this paper, we compare the performance of representative MIMO techniques such as space-time block code, closed-loop transmit diversity, and V-BLAST, etc., in IEEE 802.22 environments. We first develope deco-ding algorithms of the representative MIMO techniques and design a MIMO-OFDM system employing QPSK, 16 QAM, 64 QAM to cover several transmission rates. Since the frequency band used for IEEE 802.22 systems belongs mostly to V/UHF band and the angular spread of the received signal at the base station is very small, there Is a significant correlation between the signals from transmit antennas. Thus, in this paper, we compare the performance of MIMO-OFDM systems employing only two Tx antennas in correlated fading environments.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.504-516
• /
• 2017

The Jordan Research and Training Reactor (JRTR) is the first research reactor in Jordan, the commissioning of which is ongoing. The reactor is a 5-MWth, open-pool type, light-water-moderated, and cooled reactor with a heavy water reflector system. The neutron measurement system (NMS) applied to the JRTR employs a wide-range fission chamber that can cover from source range to power range. A high-sensitivity boron trifluoride counter was added to obtain more accurate measurements of the neutron signals and to calibrate the log power signals; the NMS has a major role in the entire commissioning stage. However, few case studies exist concerning the application of the NMS to a research reactor. This study introduces the features of the NMS and the boron trifluoride counter in the JRTR and shares valuable experiences from lessons learned from the system installation to its early commissioning. In particular, the background noise relative to the signal-to-noise ratio and the NMS signal interlock are elaborated. The results of the count rates with the neutron source and the effects of the discriminator threshold are summarized.

• Smart Structures and Systems
• /
• v.23 no.2
• /
• pp.155-171
• /
• 2019

In this study, Semi-active Tuned Mass Dampers (STMDs) are employed in order to cover the prevailing uncertainties and promote the efficiency of the Tuned Mass Dampers (TMDs) to mitigate undesirable structural vibrations. The damping ratio is determined using type-1 and type-2 Fuzzy Logic Controllers (T1 and T2 FLC) based on the response of the structure. In order to increase the efficiency of the FLC, the output membership functions are optimized using genetic algorithm. The results show that the proposed FLC can reduce the sensitivity of STMD to excitation records. The obtained results indicate the best operation for T1 FLC among the other control systems when the uncertainties are neglected. According to the irrefutable uncertainties, three supplies for these uncertainties such as time delay, sensors measurement noises and the differences between real and software model, are investigated. Considering these uncertainties, the efficiencies of T1 FLC, ground-hook velocity-based, displacement-based and TMD reduce significantly. The reduction rates for these algorithms are 12.66%, 26.43%, 20.98% and 21.77%, respectively. However, due to nonlinear behavior and considering a range of uncertainties in membership functions, T2 FLC with 7.2% reduction has robust performance against uncertainties compared to other controlling systems. Therefore, it can be used in actual applications more confidently.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.465-471
• /
• 2021

Grass breeding starts with the process of selecting grass with good traits, and this operation consumes a lot of resources. Therefore, there is a need for an efficient screening method. Stolon is a unit for the storage of carbohydrates and vegetative propagation, which enhances grass growth and grass sod. Grass varieties with active production of stolons have excellent traits because they reproduce quickly and have a high density. To select grass with such a trait, the survival rate and the production rate of stolon after transplantation of 72 grass germplasms were investigated. After transplantation, the survival rate ranged from 75% to 100%. The majority of the grass cultivars showed a 100% survival rate. Therefore, the group was divided into two groups: A grass variety showing 100% survival and a grass variety that did not show 100% survival. The grass cultivar group, which showed a 100% survival rate after transplantation, included 61 turf varieties, and the rates of stolon production in these grass varieties ranged from 0 to 100%. In contrast, 10 varieties were included in the grass cultivar group that did not show 100% survival after transplantation. These cultivars had a stolon production rate of 0 to 33%. The results suggest that grass germplasms with a 100% survival rate should be selected.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.8
• /
• pp.399-407
• /
• 2021

Stock movement is difficult to predict because it has dynamic characteristics and is influenced by many factors. Even so, there are some approaches to predict stock price movements, namely technical analysis, fundamental analysis, and sentiment analysis. Many researches have tried to predict stock price movement by utilizing these analysis techniques. However, the results obtained are varied and inconsistent depending on the variables and object used. This is because stock price movement is influenced by a variety of factors, and it is likely that those studies did not cover all of them. One of which is that no research considers the use of fundamental analysis in terms of currency exchange rates and the use of foreign stock price index movement related to the technical analysis. This research aims to predict stock price movements in Indonesia based on sentiment analysis, technical analysis, and fundamental analysis using Support Vector Machine. The result obtained has a prediction accuracy rate of 65,33% on an average. The inclusion of currency exchange rate and foreign stock price index movement as a predictor in this research which can increase average prediction accuracy rate by 11.78% compared to the prediction without using these two variables which only results in average prediction accuracy rate of 53.55%.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.72-79
• /
• 1996

In a BAF(Batch Annealing Furnace), various studies have been pursued in order to reduce energy consumption rate to improve productivity and to stabilize the properties of products. The purpose of this study was to investigate the effects of both the atmospheric gas and convector plate shapes on the augmentation of heat transfer. The use of hydrogen instead of nitrogen as an atmospheric gas, combined with high convection in the BAF, has shown that considerable increases in furnace out put and significantly improved material quality are attainable. Because convector plate shapes make the atmosheric gas easily flow density, high diffusivity and reducing character of hydrogen, a better heat transfer rates resulting in uniform material temperature distribution and improved coil surface quality can be achieved. Also, it was found that the closed convector plate took more time for the annealing cycle time than the other plate type(open-type)by about ten hours.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.562-572
• /
• 2023

In this study, we aimed to evaluate the quality of Aralia elata shoots according to different packaging methods during storage at 2℃. The highest level of dehydration and wilting incidences were observed in polypropylene containers with polyvinyl chloride wrap (PP+PVC), and these levels continually increased during the entire storage period, compared to other packaging methods. The overall marketability of A. elata shoot packaged in polyethylene terephthalate container (PET) and PP with the mineral-coted functional warp (PP+F) constantly declined during storage with a similar level of 38.6 and 36.0% at 15 days in storage, respectively. PP with PET cover packaging (PP+PET) showed the lowest decay and wilting rates during the entire storage, and the wilting score at 10th day was 51.9, 58.0, 51.8% suppressed, as compared to PET, PP+PVC, and PP+F, respectively. Consequently PP+PET packaging effectively decreased the deterioration of A. elata and maintained marketability for 10 days of storage at 2℃.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.2
• /
• pp.131-136
• /
• 2005

This study was conducted from March 21 to July 7 in 2004 at JeJu Island to investigate the influences of seed-ing rates (4, 6, 5, 10 and 12 kg/10a) on creeping bentgrass vegetation. The result obtained were summarized as follows; plant height was getting longer as seeding rate increased from 4 to 12 kg/10a, Although it was no significance from 10 to 12 kg/10a. Root length, Minolta SPAD-502 chlorophyll reading value, leave and root weight increased as the plant height increased. The degree of land cover and density of creeping bentgrass also increased as seeding rate increased from 4 to 12 kg/10a, and the degree of land cover and density of weed decreased. The number of weed species on decreased as increasing of seeding rate. Then ranking of the dominant weeds were Digitaria adscendens, Chenopodium album var. centrorubrum md Poa annua (at 4 kg/10a seeding rate), Digitaria adscendens, Chenopodium album var. centrorubrum and Stellaria media (at 6 kg/10a seeding rate). Chenopdium album var. centrorubrum, Poa annua and Digitaria adscendens (at 8 kg/10a seeding rate), Digitaria adscendens, Chenopdium album var. centrorubrum and Steilaria media (at 10 kg/10a seeding rate), Chenopdium album var. centrorubrum, Digitaria adscendens and Stellaria media (at 12 kg/10a seeding rate). These results showed that the optimum seed-ing rate is 10 kg/10a for growth of creeping bentgrass in volcanic ash soils of Juju island.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.334-341
• /
• 2006

This study was to investigate the growth of planted red pine (Pinus densiflora S. et. Z.) seedling, soil properties and understory vegetation structure after fertilizer treatments [unfertilized plot (control), CF plot (Combination Fertilizer), UF plot (Urea Formaldehyde Fertilizer)] in a Pinus densiflora stand planted after the forest fires in Gosung, Gangwon province. The height growth rates of seedlings in four years were 264% in unfertilized, 404% in CF, and 388% in UF plots, respectively. The root collar diameters were increased 340% in unfertilized, 454% in CF, and 427% in UF plots, respectively. No significant changes occurred in soil total nitrogen and potassium ion ($K^+$) with the fertilization. However, available $P_2O_5$, content in the soil surface (0-15 cm) increased with the fertilizer application. Soil organic matter increased significantly with fertilizer treatments, while gradual decrease occurred in unfertilized plots. Sodium ion ($Na^-$) decreased in all sites. Soil pH, CEC, calcium ion ($Ca^{2+}$) and magnesium ion ($Mg^{2+}$) contents were not significantly different among treatments. Although Shannon's species diversity index and species richness in understory vegetation did not change with fertilizer treatments, vegetation cover rates in forest floor increased significantly with the fertilization. These results suggest that the increase of pine seedling growth and vegetation cover rates with fertilization could enhance soil stabilization in forest tire areas.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.241-258
• /
• 1998

The experimental demersal trawl surveys to provide the essential information for the assessment, management and utilization of commercially important fish stocks in the southern waters of Korea were carried out during five research cruises between October 1996 and October 1997 by the training ship “KAYA” of Pukyong National University. The biological sampling was conducted by using the trawl net with a cover net of 36 mm in mesh size at 64 planned trawl stations during daylight to identify the biological characteristics of fish. Each catch was standardized into catch per unit of time and the catches at each trawl station were sorted, weighed and counted by species. The changes in catches of each fish species and the shifts in dominant species by seasions and sampling regions in the research area were analyzed, and the abundance of fish was estimated from the relationship between the trawl catches and the volume of the water column sampled by demersal trawls. The results obtained can be summarized as follows : 1. During the 64 demersal trawls conducted in the southern waters of Korea, 129 species including 112 species of fishes, 8 species of Cephalopoda and 7 species of Crustacea, were identified Also, during the 1996 and 1997 trawl surveys in the reseach area, a large number of commercially important species with small differences in proportion was found. me proportion of Japanese horse mackerel which comprised 19.8% of the total catch by weight was highest, followed by chub mackerel(15.0%), swordtip squid(9.0%), redwing searobin(6.2%), konoshiro gizzard shad(6.1%), Japanese flying squid(5.8%), silver pomfet(5.1%), blackmouth goosefish(5.1%), etc. Swordtip squid, Japanese flying squid, blackmouth goosefish and blackthroat seaperch were among the dominant species in all seasons with a relatively high and stab1e proportion(3.6~9.0%), and were widely distributed in the entire southern water of Korea. 2. The catch rates by cover net varied at 0.7~91.9% by weight of the total trawl catch by codend and cover net at 64 planned trawl stations and the mean catch rate was 44.4%. Species comprising a major portion of the catches by cover net mainly were swordtip squid, konoshiro gizzard shad, the juveniles of Japanese horse mackerel, blackthroat seaperch and chub mackerel, etc. 3. The distribution density of fish in terms of biomass per unit volume which derived from the catch data by 63 bottom trawl hauls in the southern waters of Korea ranged from 17.9 $\times$ 10-6 to 1,440.9 $\times$ 10-6kg/m3 with the mean value of 153.8 $\times$ 10-6 kg/m3. These fish densities varied between seasons, location of sampling stations and sea conditions. From these results, it is worth noting that the catch composition of multispecies and the increased occurrence of small fish in the southern waters of Korea may also result in new problems in determining the total allowable catch(TAC) levels for economically important species.