• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.263-266
• /
• 2017

In this study, the characteristics of anti-pollution coatings on glass substrates through annealing treatment were investigated. To investigate the change of properties by coating method and number of annealing treatment, after the anti-pollution coating was performed on the surface of glass substrate in three ways, the annealing treatment was performed by setting three kinds of annealing treatment conditions. The annealing treatment method is a torch using gas, which is advantage in that it can be installed directly on the site in an easy way compared with a annealing treatment process which is generally difficult. The anti-pollution properties, contact angle, transmittance, hardness, and adhesion of films on glass substrate were measured under 9 conditions of combination of coating methods and annealing treatment conditions. It was confirmed that as the number of annealing treatment increases, the anti-pollution property of the film synthesized on glass substrate becomes better.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7071-7077
• /
• 2015

최근 스마트폰, 태블릿 PC 및 전자기기 등의 사용이 증가함에 따라 커버글라스의 수요가 증가하고 있는 추세이다. 모바일 기기의 디스플레이가 대형화되면서 접촉이나 낙하 등과 같이 외부에서 힘을 받게 되는 환경에서 높은 강도를 유지하는 것이 요구되고 있다. 커버글라스 제작 공정에서 연마공정은 커버글라스의 표면거칠기 및 충분한 강도를 제공하는 중요한 공정이다. 기존 연삭 숫돌에 의한 가공방법은 커버글라스 가공표면에 스크레치, 칩핑, 노칭 및 마이크로 크랙 등의 가공 문제점이 발생한다. 따라서 본 연구에서는 모바일 커버글라스의 연마를 위해 연마필름을 이용한 폴리싱 시스템을 개발하였다. 구조적 안정성을 평가하기 위해 연마 필름 폴리싱 시스템에 대한 유한요소모델을 생성하였고 다물체 동역학 해석을 수행하였다. 연마 필름 폴리싱 시스템에 대한 응력 및 변위 해석을 통해 특성을 분석하였고 레이저 변위 센서를 이용해 제작된 시스템에 대한 변위를 측정하여 구조적 안정성에 대해 확인하였다.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1274-1278
• /
• 2009

Fracture characteristics for plate and dome shapes of glass filled ceramics using shock tube were carried out. Glass filled ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role as separated membrane between combustion and external air, and needs the frangible characteristics that the particles of fractured glass filled ceramics should not affect the internal components of combustion. The objectives of this study are to evaluate the fracture pressures for various thicknesses and diameters of shock impact area. Also fracture phenomena of separated membrane using a shock tube compare with analytical method. The experimental apparatus consists of a driver, a driven section and a dump tank. The used material is glass filled ceramic made from Corning company. Specimens have the thickness of 3, 4.5 and 6mm. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 설비공학논문집
• /
• 제19권11호
• /
• pp.797-802
• /
• 2007

The effects of window cover on the performance of the plate type radiant cooling test system are studied. The cover materials tested are 2mm, 1mm, 0.7mm glass, Cokin 007 filter, and PVC film. The measurements are performed during the September nights of 2005 at the rooftop of the building in Seoul. The equivalent height of the building is about a building with twelve floors. The radiant cooling performance of the black painted and aluminum film coated plate are compared under no cover condition. Also the results are compared when the system has cover over the plate. In general, the covers reduce the radiant cooling temperature differences during the nighttime. Among these covers, the PVC film cover shows the best performance. In some cases, the plate with PVC film cover shows lower temperatures than the system without cover.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.272-277
• /
• 2019

본 논문에서는 옥외용 디스플레이의 눈부심 방지 강화유리 생산 방법을 제안하였다. 일반적으로 옥외용 디스플레이를 위한 커버글라스의 주요 사양은 내강도와 눈부심 방지이다. 내강도는 커버글라스를 고온로에서 열처리한 강화유리를 사용하여 그 요구 사양을 만족시키고 눈부심 방지를 위해서는 AG(Anti-Glare)필름을 강화 유리에 접착하여 주로 사용한다. 그러나 필름 형태의 눈부심 방지기술은 PET 필름자체의 내마모성이 3H정도로 취약하여 AG 성능이 지속적으로 유지되기 어렵다. 따라서 본 논문에서는 AG 필름이 가지는 내구성의 단점을 보완하고 기존 강화유리 생산 공정을 이용하는 눈부심 방지 기술을 제안하였다. 제안된 눈부심 방지 코팅은 ZBS ($ZnO-B_2O_3-SiO_2$) 분말을 유리 표면에 도포하고 강화공정을 수행하여 내구 강도와 눈부심 방지 성능을 높일 수 있도록 하였다. ZBS 분말을 유리 표면에 도포하기 위해서는 스크린 프린팅 공정을 이용하여 분말이 유리표면에 균일하게 도포되도록 하였다. 스크린 프린팅 시 고려되어야 하는 주요 변수는 분말을 희석하기 위한 오일의 농도와 메쉬 오프닝 사이즈이다. 이 두 변수의 설정에 따라 스크린 프린팅 공정에서 도포되는 ZBS 분말의 양이 조절되므로 이에 대한 상관관계를 실험을 통해 규명하였다. 제안된 제조 방법의 성능을 평가하기 위해 상업용 시장에서 널리 사용되는 haze, 표면 거칠기 및 투과도를 성능 지표로 선정하였고 눈부심 방지를 위해 일반적으로 사용되는 AG필름과 비교하여 그 성능을 검증하였다. 비교 결과 제안된 제조 방법에 의한 강화유리의 투과도는 AG필름의 89.5%보다 다소 감소한 83.1%이지만 막강도는 7H로 두배 이상 향상됨을 확인하였다.

• Current Photovoltaic Research
• /
• 제6권4호
• /
• pp.102-108
• /
• 2018

A glass-texturing technique was developed for photovoltaic (PV) module cover glass; periodic honeycomb textures were formed by using a conventional lithography technique and diluted hydrogen fluoride etching solutions. The etching conditions were optimized for three different types of textured structures. In contrast to a flat glass substrate, the textured glasses were structured with etched average surface angles of $31-57^{\circ}$, and large aspect ratios of 0.17-0.47; by using a finite difference time-domain simulation, we show that these textured surfaces increase the amount of scattered light and reduce reflectance on the glass surface. In addition, the optical transmittance of the textured glass was markedly improved by up to 95% for wavelengths ranging from 400 to 1100 nm. Furthermore, applying the textured structures to the cover glass of the PV module with heterojunction with intrinsic thin-layer crystalline silicon solar cells resulted in improvements in the short-circuit current density and module efficiency from 39 to $40.2mA/cm^2$ and from 21.65% to 22.41%, respectively. Considering these results, the proposed method has the potential to further strengthen the industrial and technical competitiveness of crystalline silicon solar cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.235-236
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2305-2306
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.323-326
• /
• 2005

Uniaxial tension test of Glass Fiber Reinforced Polymer (GFRP) bar reinforced concrete prisms was performed. The objective was to investigate the adequate cover thickness of the GFRP rebars. The tension stiffening effect of GFRP bar reinforced concrete was also studied. The test variables included rebar types (conventional steel rebar and two different GFRP rebars) and cover thicknesses (five different cover thicknesses ranging between 1-3db). Normal strength concrete was used. Cracking patterns on concrete surface and cracking loads were careful1y observed during the direct tensile test. The test results indicated that the adequate cover thickness of the GFRP rebars may even be larger than that of the steel rebars and that the cover thickness of 2db commonly specified for the GFRP rebars may not be large enough. The tension stiffening effect of the GFRP rebars was also quantified and documented from the test results.