• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.325-328
• /
• 2015

NFC란 Near Field Communication의 약자로, 양방향 통신을 지원하는 근거리 통신 방법으로, 저전력, 사용의 편이성 등이 새롭게 각광받고 있는 차세대 통신수단이다. 본 논문에서는 기존의 바코드와 유사한 QR코드와 NFC를 모두 이용하는 모바일 환경에서의 소셜 커머스 결제 시스템을 제안한다. NFC를 사용하여 결제하는 제안된 방식이 기존의 결제 방식에 비하여 간편하고 편의성이 증대됨을 보인다.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.51-54
• /
• 2002

As digital systems continue to use components with faster edge rate and clock speeds, transmission of the digital information can take place many troubles. The increasing requirement for controlled impedance PCBs becomes both a critical success factor and a design challenge. Especially, the noise sources in digital system include the noise in power supply, ground and packaging due to simultaneous switching of signal, signal reflections and distortions on single and multiple transmission lines. This paper simulates the tracks controlled impedance with the test coupon. So, it can saves the design time and supports the economical PCB design.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.11-19
• /
• 2011

A localization development of Composite rotor blade for Smart Unmanned Aerial Vehicle(SUAV) has been conducted. Overall localization development encompassed selection of domestic composite material having similar properties to that of original one at its best, coupon tests for data base of new material properties, re-calculation of blade sectional properties, and validation of structural/dynamic design requirements such as isolation of rotor natural frequency from excitation, static and fatigue strength, aeroelastic stability. The results of all these activities are described. This paper briefly discusses the improved manufacturing process for the localization of SUAV blade.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.248-249
• /
• 2023

프랜차이즈 카페와 달리 개인 카페에서는 쿠폰을 발급하고 관리하는 것에 대한 어려움이 존재한다. 따라서 본 연구는 여러 매장에서 통합적으로 사용할 수 있는 쿠폰 시스템을 개발하였다. 이는 퍼블릭 블록체인을 활용하여 사용자들 간 쿠폰 발급과 사용 과정의 투명한 공개 및 공유가 가능하도록 설계됐다.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.193-199
• /
• 2011

A method to improve internal corrosion control efficiency by adding lime and carbon dioxide, which, in turn increases the Langelier Index (LI) for filtered water at a conventional drinking water treatment plant (WTP) was investigated. The SJ WTP (Q=100,000 $m^{3}$/d) has been operating an internal corrosion control system since 2006. The system has achieved stable operation through technical development and trial and error over a period of several years. As a result of the operation, the LI of treated water has increased up to 29% by adjusting pH of filtered water to 7.8 with the addition of lime and carbon dioxide. Coupon tests in the distribution system indicated that the corrosion rate has been delayed by 24% when the internal corrosion method was implemented. The increase of LI by lime and carbon dioxide has been proven to be a practical method for controlling corrosion.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.323-330
• /
• 2009

The objective of this research was to develop a practical integrated approach using extracted features from electrical resistance measurements and coupled electromechanical models of damage, for in-situ damage detection and sensing in carbon fiber reinforced plastic(CFRP) composites. To achieve this objective, we introduced specific known damage (in terms of type, size, and location) into CFRP laminates and established quantitative relationships with the electrical resistance measurements. For processing of numerous measurement data, an autonomous data acquisition system was devised. We also established a specimen preparation procedure and a method for electrode setup. Coupon and panel CFRP laminate specimens with several known damage were tested. Coupon specimens with various sizes of artificial delaminations obtained by inserting Teflon film were manufactured and the resistance was measured. The measurement results showed that increase of delamination size led to increase of resistance implying that it is possible to sense the existence and size of delamination. A quasi-isotropic panel was manufactured and electrical resistance was measured. Then three different sizes of holes were drilled at a chosen location. The panel was prepared using the established procedures with six electrode connections on each side making a total of twenty-four electrodes. Vertical, horizontal, and diagonal pairs of electrodes were chosen and the resistance was measured. The measurement results showed the possibility of the established measurement system for an in-situ damage detection method for CFRP composite structures.

• Journal of Korea Multimedia Society
• /
• v.18 no.8
• /
• pp.968-979
• /
• 2015

In this paper, we study a vibration bell App which shows waiting sequence numbers by utilizing smartphones to solve an inconveniently long waiting time from ordering to getting foods in restaurants and coffee shops. Unlike existing independently developed hardware and software, the vibration bell App is developed to manage and integrate customer management service, POS service in shops, and group shop management services. The functions of the vibration bell App include two-way communications based on NFC- issuing waiting sequence numbers and electronic coupon, showing event information, and transferring user information. Furthermore, the user's personal information is minimized by recognizing the pre-existing information of the user's smartphone. Replacing the shop's vibration bell system with the vibration bell APP, the shops can reduce the cost of construction and maintenance by up to 1/10, compared to the cost of for existing vibration bell systems. Moreover, the customer's preference and current sales trend can be easily figured out. Thus, it will have a great effect on the future marketing strategies.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.953-961
• /
• 2009

The usage of DRM-applied digital contents reduces user's convenience, thus it leads the many users to avoid using DRM-applied digital contents. In this paper, therefore, we propose the new distribution model in which the users, who purchase the DRM-applied digital contents, can resale freely those contents to the other users. As a result, the proposed model induces the users to distribute contents soundly by including them in one of distribution objects. For the purpose of this, in this paper, we propose that a packaged content and usage rights are transferred to another user by using a method which based on some existing digital ticket or coupon. In addition, the security of the proposed system is discussed for the double transfer, the forgery and the modification of usage rights, and the reproduction of contents and usage rights.

• Journal of Aerospace System Engineering
• /
• v.10 no.3
• /
• pp.63-69
• /
• 2016

The properties of composite materials, when compared to those of metallic materials, are highly variable due to many factors including the batch-to-batch variability of raw materials, the prepreg manufacturing process, material handling, part-fabrication techniques, ply-stacking sequences, environmental conditions, and test procedures. It is therefore necessary to apply reliable statistical-analysis techniques to obtain the design allowables of composite materials. A new composite-material qualification process has been developed by the Advanced General Aviation Transport Experiments (AGATE) consortium to yield the lamina-design allowables of composite materials according to standardized coupon-level tests and statistical techniques; moreover, the generated allowables database can be shared among multiple users without a repeating of the full qualification procedure by each user. In 2005, NASA established the National Center for Advanced Materials Performance (NCAMP) with the purpose of refining and enhancing the AGATE process to a self-sustaining level to serve the entire aerospace industry. In this paper, the statistical techniques and procedures for the generation of the allowables of aerospace composite materials will be discussed with a focus on the pooling-across-environments method.

• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.79-83
• /
• 2016

The purpose of this study is to provide customized information to student which study and live in a university campus. In this study, we collect internal data of campus and external data on the Internet such as the blog or SNS and, then store and process them. After that, we propose a system for providing individual students one-to-one marketing by analyzing these data in detail. This system analyzes purchase history information and the attendance of the building, and then transmits the coupon and information individually according to the pattern to the student's mobile phone.