• 센서학회지
• /
• 제11권5호
• /
• pp.273-278
• /
• 2002

광섬유의 침입 감지기능을 개발하기 위하여 다중모드 GRIN(graded-Index) 광섬유의 휨에 의한 광섬유내의 광전파 특성변화를 고찰하였다. 다중모드 CRIN 광섬유의 data파는 기본(fundamental) 모드로, 침입 감시용 감시파는 높은 차수의 모드로 동시에 전파 되게 하고, 광섬유의 휨(bending)에 의한 데이타 유출시도는 높은 차수 모드의 감시파의 감쇠를 가져오고, 결국 수신측의 경보를 작동하도록 한다. 또한 일정한 곡률반경으로 감겨진 광섬유에 기본 모드만 선별적으로 주입된 경우에 있어서, 다중모드 GRIN 광섬유 내에서의 광파의 전파과정을 이론적으로 해석하고, 광섬유가 휘게 피는 경우 여러 모드 사이에 결합(coupling)이 생겨나게 되는데, 광섬유가 감겨진 곡률반경을 변경해가면서 결합되는 기본모드의 power 변화를 수치해석을 이용한 프로그램 시뮬레이션을 통하여 조사하였다. 이 연구결과는 광섬유의 휨에 의하여 방출되는 데이타 도청 및 침입자 감지에 다중모드 GRIN 광섬유 활용 가능성과 광섬유의 곡률반경이 1cm 정도가지는 Asawa-Taylor의 모델[4]이 정당함을 보였다.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.70-77
• /
• 2000

On the dynamic behavior of a simple beam the influences of the velocities and distance of two moving masses have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving masses represented by the time functions. As increasing the velocties of two moving masses on the simple beam, the amplitude of the transverse vibration of the simple beam is decreased and the frequency of the transverse vibration of the simple beam is increased. As the distance between two moving masses increase, the transverse displacement of the simple beam is decrease. The simple beam is very stable in second mode at $\bar{a}=0.5$ and in third mode at $\bar{a}=0.3$.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.146-147
• /
• 2000

The electromagnetic wave scattering from active objects has only recently attracted attention.$^{(1).(3)}$ Theoretical studies have considered normal-incidence plane-wave interactions with active dielectric cylinders with the prediction of large enhancements in the scattered field for bound mode structures. According to the theory of the electromagnetic wave scattering from a dielectric cylinder, the eigenvector solutions are discrete and have both guided (non-radiative) and leaky (radiative) mode solutions. By using an anti-guiding (leaky) structure instead of a guided structure and scattering at oblique incident angles near critical angle, the scattering resonances predicted by theoretical studies were obtained for the first time. A fine-grained scan of the plane-wave incident angle a reveals the existence of discrete scattering resonances. The diameter and real part of the index of refraction determine the resonant conditions and the imaginary part of the refractive index has a threshold value to make mode up for its radiation loss. The cross coupling between transverse electric (TE) and transverse magnetic (TM) modes is clearly detected for both active and passive scattering as theoretically expected. (omitted)

• 한국광학회지
• /
• 제16권3호
• /
• pp.266-274
• /
• 2005

본 논문에서는 2차원 광결정 공진기의 결합을 통해 WDM시스템에 적합한 특성을 가지는 공진 필터를 설계하였다. 공진기간의 결합에 있어서 고려해야 할 요소를 시영역에서의 모드 결합이론(coupling modes in time)을 적용하여 이론적으로 분석하였으며, 전자회로 등가화를 이용하여 쉽게 그 요소를 결정할 수 있음을 보였다. 공진기 결합에 있어서 공진기 간의 간격에 따른 위상천이에 대해서 외부감쇄에 의한 Q-factor를 조정함으로써 보상할 수 있음을 확인하였고, 2차원 광결정 점결함 공진기를 이용하여 500GHz의 대역폭을 가지며 통과대역에서 0.5 dB 리플을 가지는 3차 Chebyshev 대역 통과 필터를 설계하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.688-696
• /
• 2017

This paper presents an integrated roll-pitch-yaw autopilot using an equivalent based sliding mode control for skid-to-turn nonlinear time-varying missile system with lumped disturbances in its six-equations of motion. The considered missile model are developed to integrate the model uncertainties, external disturbances, and parameters perturbation as lumped disturbances. Moreover, it considers the coupling effect between channels, the variation of missile velocity and parameters, and the aerodynamics nonlinearity. The presented approach is employed to achieve a good tracking performance with robustness in all missile channels simultaneously during the entire flight envelope without demand of accurate modeling or output derivative to avoid the noise existence in the real missile system. The proposed autopilot consisting of a two-loop structure, controls pitch and yaw accelerations, and stabilizes the roll angle simultaneously. The Closed loop stability is studied. Numerical simulation is provided to evaluate performance of the suggested autopilot and to compare it with an existing autopilot in the literature concerning the robustness against the lumped disturbances, and the aforesaid considerations. Finally, the proposed autopilot is integrated in a six degree of freedom flight simulation model to evaluate it with several target scenarios, and the results are shown.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.867-872
• /
• 2005

This paper describes the measurement and location method of partial discharges in high voltage CV cables. Coupling capacitors were used to detect partial discharge signal. Impedance characteristic of the coupling circuit and an amplifier with a high Common Mode Rejection Ratio(CMRR) were studied to improve sensitivity of the circuit. From the calibration experiment, the sensitivity of the partial discharge detection circuit was about 100pC. Also, we confirmed that the location of partial discharges in cables can be estimated by calculation of time difference between the first pulse and the second one reflected from the other end of the cable.

• Ocean Systems Engineering
• /
• 제2권2호
• /
• pp.115-135
• /
• 2012

The very low natural frequencies of tension leg platforms (TLP's) have raised the concern about the significance of the action of hydrodynamic wave forces on the response of such platforms. In this paper, a numerical study using modified Morison equation was carried out in the time domain to investigate the influence of nonlinearities due to hydrodynamic forces and the coupling effect between surge, sway, heave, roll, pitch and yaw degrees of freedom on the dynamic behavior of TLP's. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables and the nonlinear equations of motion were solved utilizing Newmark's beta integration scheme. The effect of wave characteristics such as wave period and wave height on the response of TLP's was evaluated. Only uni-directional waves in the surge direction was considered in the analysis. It was found that coupling between various degrees of freedom has insignificant effect on the displacement responses. Moreover, for short wave periods (i.e., less than 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on the wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations about its original position. Also, for short wave periods, a higher mode contribution to the pitch response accompanied by period doubling appeared to take place. For long wave periods, (12.5 and 15 sec.), this higher mode contribution vanished after very few cycles.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.283-294
• /
• 2020

This work aims at studying the feasibility of continuous removal of mixed heavy metal ions from simulated zinc plating wastewaters by coupling a microbial fuel cell and a microbial electrolysis cell in batch and continuous modes. The discharging voltage of MFC increased initially from 0.4621 ± 0.0005 V to 0.4864 ± 0.0006 V as the initial concentration of Cr⁶⁺ increased from 10 ppm to 60 ppm. Almost complete removal of Cr⁶⁺ and low removal of Cu²⁺ occurred in MFC of the MFC-MEC-coupled system after 8 hours under the batch mode; removal efficiencies (REs) of Cr⁶⁺ and Cu²⁺ were 99.76% and 30.49%. After the same reaction time, REs of nickel and zinc ions were 55.15% and 76.21% in its MEC. Cu²⁺, Ni²⁺, and Zn²⁺ removal efficiencies of 54.98%, 30.63%, 55.04%, and 75.35% were achieved in the effluent within optimum HRT of 2 hours under the continuous mode. The incomplete removal of Cu²⁺, Ni²⁺ and Zn²⁺ ions in the effluent was due to the fact that the Cr⁶⁺ was almost completely consumed at the end of MFC reaction. After HRT of 12 hours, at the different sampling locations, Cr⁶⁺ and Cu²⁺ removal efficiencies in the cathodic chamber of MFC were 89.95% and 34.69%, respectively. 94.58%, 33.95%, 56.57%, and 75.76% were achieved for Cr⁶⁺, Cu²⁺, Ni²⁺ and Zn²⁺ in the cathodic chamber of MEC. It can be concluded that those metal ions can be removed completely by repeatedly passing high concentration of Cr⁶⁺ through the cathode chamber of MFC of the MFC-MEC-coupled system.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.37-37
• /
• 2003

Electron whistlers frequently excite proton whistlers. The proton whistlers appear on the dynamic spectrum as rising tones, which start after the reception of a short electron whistler, asymptotically approaching the local proton gyro-frequency. The proton whistlers are dispersed forms of lightning impulses and their dispersion can be explained by the effects of heavy ions such as H+ and He+ on the propagation of an electromagnetic wave in the ionosphere. In the ionosphere, a right-handed circularly-polarized electron whistler becomes coupled to a left-handed circularly-polarized proton whistler when the frequency becomes close to a cross-over frequency. By adopting the multi-fluid numerical wave model, we examine how the mode coupling varies as the ion composition changes along altitude in the mid-latitude ionosphere. The time histories and dynamic spectra of electric fields are presented. In addition, we compare our results with the previous theoretical and observational studies.

• 한국통신학회논문지
• /
• 제25권5A호
• /
• pp.674-681
• /
• 2000

제작 공정이 단순하고 결합길이가 매우 짧은 폴리머를 이용한 수직형 비대칭 광 결합기를 새로이 제안하였다. 제안된 소자의 결합 특성을 분석하여 최적화를 도모하였다. 광통신 파장대인 1.33$\mu\textrm{m}$, TE모드에서 중간 버퍼층 두께 t=0.4$\mu\textrm{m}$이고, nu=1.522, n1=1.51이고 nt=1.49일 때, 결합길이가 277$\mu\textrm{m}$이며, 최고 94%의 결합효율을 얻을 수 있었다. 이는 전체 소자길이를 감소시켜, 도파 손실을 줄일 수 있으며, 고직적화는 물론 공정의 단순화로 인한 생산 시간 및 비용 절감과 향 후 광 스위치나 변조기로의 응용도 기대된다.