• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.468-480
• /
• 1993

In this paper, at first, the characteristics of double mode SAW (DMS) resonator are analysed by applying the wave guide model and coupled mode theory to 1-port resonator. The DMS resonators (2-pole), which are arranged in a close, parallel configuration of two identical 1-port resonators on a single plate, and 4-pole DMS filters are designed and fabricated at the center frequency of 150.15 MHz with 3-dB bandwidth of 80 KHz. The empirical design characteristics are obtained from the comparison of experimental and theoretical values resulted from several fabrications, and the narrow bandpass filters are implemented on the basis of the above empirical results, which can be used to mobile communication systems. A ST-cut quartz substrate is selected for the stable temperature-frequence characteristics, and high resolution photolithography is applied to the fabrication of filter to get the fine electrode patterns.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.64-70
• /
• 1999

We show that both cross and bar states with very high extinction ratios larger than 30 dB can be obtained in ultra short (< $100{\mu}m$) two-section vertical directional couplers. Based on the calculations of various possible combinations of the refractive indices of waveguides in each section using the improved coupled mode theory and beam propagation method, the guidelines for the design of ultra short two-section vertical directional couplers are presented to obtain both cross and bar states with high extinction ratios larger than 30 dB at the ends of section 1 and section 2, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.221-226
• /
• 2005

In this paper, a dynamic model for the rotor shaft-coupling-blade system is developed. The blades are attached to a disk and driven by an electric motor shaft which is flexible in torsion. We assumed that the shaft torsional flexibility is lumped in the flexible coupling which is usually adopted in rotor systems. The Lagrangian approach with the small deformation theory for both blade-bending and shaft-torsional deformations is employed for developing the equation of the motion. The assumed modes method is used for estimating the blade transverse deflection. The numerical results highlight the effects of both structural damping of the system and the torsional stiffness of the flexible coupling to the dynamic response of the blade. The results showed strong coupling between the blade bending and shaft torsional vibrations in the form of inertial nonlinearif, stiffness hardening and softening.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.74-82
• /
• 1999

We proposed an efficient beam Propagation Method(BPM) algorithm for 3-D analysis, which can handle great amount of data on PC efficiently. The new algorithm, which is an expanded version of DuFort-Frankel algorithm for 3-D analysis, can reduce the number of computations for a given BPM analysis. The algorithm was applied to a rib-type directional coupler to find the same results as those from the coupled mode theory.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.85-93
• /
• 1994

We have studied the effect of channel and/or spacing chirpings on the near field and near field intensity patterns, modal gains and radiation angles of 6 supermodes in the index-guided laser arrays with 6 channels, on the basis of the coupled mode theory. The spacings between channels can be indenpendent parameters for control of the radiation angle. It is found that an asymmetrically v channel-chirped array has both a smaller radiation angle and better supermode discrimination characteristics than a uniform array. Comparing two approaches for enhancing modal stability in point of supermode discrimination characteristics, approach I which increases the coupling cofficient between the outer-most waveguides at each end of an otherwise uniform array, has superior discrimination characteristics to the approach II which increases the propagation constant for the end elements with the same coupling between neighbor elements. Approach III which has a narrower spacing between the outer-most waveguides at one end and a wider channel width of the outer-most waveguide at another end, gets a narrower radiation angle than the approach I and good supermode discrimination characteristics by applying optimized gain profiles.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1023-1029
• /
• 2005

In this paper, a dynamic model for the rotor shaft-coupling-blade system was developed. The blades are attached to a disk and driven by an electric motor shaft which is flexible in torsion. We assumed that the shaft torsional flexibility was lumped in the flexible coupling which is usually adopted in rotor systems. The Lagrangian approach with the small deformation theory for both blade-bending and shaft-torsional deformations was employed for developing the equation of the motion. The Assumed Modes Method was used for estimating the blade transverse deflection. The numerical results highlight the effects of both structural damping of the system and the torsional stiffness of the flexible coupling to the dynamic response of the blade. The results showed strong coupling between the blade bending and shaft torsional vibrations in the form of inertial nonlinearity, stiffness hardening and softening.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.42-50
• /
• 2000

We show that both cross and bar states with high extinction ratios larger than 30dB can be achieved at eh same ends of ultra-short fused vertical directional coupler switches with two sections by changing the refractive indices of cores and inner cladding layers less than 1%. Based on the calculation of extinction ratios of cross state and bar state for various refractive index and thickness of inner cladding layer and core using the improved coupled mode theory and beam propagation method, the guidelines for design to achieve large tolerances in refractive indices of core and inner cladding layer in fused vertical directional coupler switches are presented.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.514-524
• /
• 2017

We proposed an integrated wavelength-selective photodetector based on a grating-assisted contradirectional coupler and a graphene absorption layer for a coarse wavelength division multiplexing (CWDM) communication system. The center wavelength of the absorption spectrum of the proposed device can be tuned simply by changing the period of the grating, and the proposed device structure is suitable to forming a cascaded structure. Therefore, an array of the proposed device of different grating periods can be used for simultaneous wavelength demultiplexing and signal detection in a CWDM communication system. Our theoretical study showed that the designed device with a grating length of $500{\mu}m$ could have an absorption of 95.1%, an insertion loss of 0.2 dB, and a 3 dB bandwidth of 7.5 nm, resulting in a -14 dB crosstalk to adjacent CWDM channels. We believe that the proposed device array can provide a compact and economic solution to receiver implementation in the CWDM system by combining functions of wavelength demultiplexing and signal detection.

• Coupled systems mechanics
• /
• v.6 no.1
• /
• pp.97-111
• /
• 2017

The present paper reports an analytical study of delamination fracture in the Mixed Mode Flexure (MMF) functionally graded beam with considering the material non-linearity. The mechanical behavior of MMF beam is modeled by using a non-linear stress-strain relation. It is assumed that the material is functionally graded along the beam height. Fracture behavior is analyzed by the J-integral approach. Non-linear analytical solution is derived of the J-integral for a delamination located arbitrary along the beam height. The J-integral solution derived is verified by analyzing the strain energy release rate with considering the non-linear material behavior. The effects of material gradient, crack location along the beam height and material non-linearity on the fracture are evaluated. It is found that the J-integral value decreases with increasing the upper crack arm thickness. Concerning the influence of material gradient on the non-linear fracture, the analysis reveals that the J-integral value decreases with increasing the ratio of modulus of elasticity in the lower and upper edge of the beam. It is found also that non-linear material behavior leads to increase of the J-integral value. The present study contributes for the understanding of fracture in functionally graded beams that exhibit material non-linearity.

• Coupled systems mechanics
• /
• v.6 no.1
• /
• pp.29-40
• /
• 2017

This work employed density functional theory to investigate the structural and ferroelectric properties of the Ruddlesden-Popper (RP) phase of lead titanate, $Pb_2TiO_4$, as well as its phase transitions with epitaxial strain. A wealth of novel structural instabilities, which are absent in the host $PbTiO_3$ material, were identified in the RP phase through phonon soft-mode analysis. Our calculations showed that the ground state of $Pb_2TiO_4$ is antiferroelectric, distinct from the dominant ferroelectric phase in the corresponding host material. In addition, applied epitaxial strain was found to play a key role in the interactions among the instabilities. The induction of a sequence of antiferroelectric and antiferrodistortive (AFD) phase transitions by epitaxial strain was demonstrated, in which the ferroic instability and AFD distortion were cooperative rather than competitive, as is the case in the host $PbTiO_3$. The RP phase in conjunction with strain engineering thus represents a new approach to creating ferroic orders and modifying the interplay among structural instabilities in the same constituent materials, enabling us to tailor the functionality of perovskite oxides for novel device applications.