• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.36-44
• /
• 1999

본 논문에서는 Ka-밴드 위성중계기용 듀플렉서의 설계를 위해 모드정합법에 의해 산란행렬을 계산하여 설계한 필터의 전달특성을 분석하고, 설계 방법의 타당성 여부 검증을 위해 대칭적 유도성 아이리스 구조와 전계면 금속삽입 구조로 설계된 2개의 대역통과 필터를 자계면 T-접합에 의한 합성방법으로 Ka-밴드 위성 중계기용 듀플렉서를 설계, 제작하였다. 제작된 듀플렉서는 위성체에서 송${\cdot}$수신 필터의 개별 사용에 따른 크기 및 두께의 증가를 효과적으로 감소시킬 수 있으며, 송신필터의 경우 아이리스를 도파관 자계면 외벽으로 돌출시키는 구조로 설계함으로써 필터 자체가 방열판 구실을 하여 고전력 전송에 따른 필터의 특성 변화를 최소화하였다. 또한 대부분의 도파관 필터에서 동작특성을 보정하기 위해 사용되는 미세 보정 나사의 사용을 배제함으로써 제작의 단순화와 위성중계기용으로서의 내구성과 신뢰도를 향상시켰다. 제작된 ,Ka-밴드 위성중계기용 듀플렉서는 2개의 필터(Rx : 30.485 ${\pm}$ 0.4 GHz, Tx : 20.755 ${\pm}$ 0.4 GHz) 모두 통과대역에서 1.2dB 미만의 삽입손실(insertion loss)과 15 dB 보다 좋은 반사손실(return loss) 특성을 얻었고, 송${\cdot}$수신 필터간 65 dB 이상의 분리도(isolation)를 나타내었다.

• 생명과학회지
• /
• 제22권11호
• /
• pp.1456-1462
• /
• 2012

소라페닙은 멀티카이네즈 억제제로서 신세포암, 전이성 간세포암 환자의 치료에 효과가 입증된 경구용 항암제이다. 이 연구의 목적은 고속액체크로마토그래피 텐덤질량분석기법(LC/MS/MS)을 이용하여 사람 혈장 내 소라페닙의 농도를 측정하는 효율적인 방법을 개발하고 한국식품의약품안전청(KFDA) 기준에 따라 분석법을 검정하는 것이다. 혈장시료($100{\mu}l$)에 내부표준물질인 chlorantraniliprole을 첨가한 후 이소프로필알콜과 에틸아세테이트로 구성(1:4, v/v)된 0.1% 포름산 함유 추출용액을 혼합하였다. 원심분리 후 상층액을 취하여 원심감압농축하였다. 잔사를 이동상에 재용해하고 Waters사의 역상 XTerra$^{TM}$ C18 칼럼(입자크기 $3.5{\mu}m$)을 장착한 고속액체크로마토그래피 장치에 주입하였다. 액체크로마토그래피는 0.1% 포름산과 10 mM 암모늄 포메이트를 함유한 버퍼용액과 메탄올, 아세토나이트릴을 각각 1:6:3으로 혼합한 용액을 이동상으로 사용하였으며 5분 내에 측정을 완료하였다. 분석대상 물질들은 텐덤질량분석기에서 electrospray 양이온 이온화($ES^+$) 검출방식으로 확인하였으며 소라페닙은 'm/z 465.2 ${\rightarrow}$ 252.5', chlorantraniliprole은 'm/z 484.4 ${\rightarrow}$ 286.2'으로 구성한 multiple reaction monitoring 방법을 사용하였다. 검정 결과, 2-5,000 ng/ml의 농도 구간에서 양호한 직선성($r^2$ > 0.99)과 정확도(90.7-103.9%), 정밀도(10% 이하)를 나타내었다. 새롭게 개발된 LC/MS/MS을 이용한 사람 혈장 내 소라페닙의 농도 측정법은 KFDA 기준을 만족하였으며, 기존의 방법에 비해 민감도가 높은 방법이었다.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.287-306
• /
• 2002

The assessment of structural performance of transfer structures under potential seismic actions is presented. Various seismic assessment methodologies are used, with particular emphasis on the accurate modelling of the higher mode effects and the potential development of a soft storey effect in the mega-columns below the transfer plate (TP) level. Those methods include response spectrum analysis (RSA), manual calculation, pushover analysis (POA) and equivalent static load analysis (ESA). The capabilities and limitations of each method are highlighted. The paper aims, firstly, to determine the appropriate seismic assessment methodology for transfer structures using these different approaches, all of which can be undertaken with the resources generally available in a design office. Secondly, the paper highlights and discusses factors influencing the response behaviour of transfer structures, and finally provides a general indication of their seismic vulnerability. The representative Hong Kong building considered in this paper utilises a structural system with coupled shear walls and moment resisting portal-frames, above and below the TP, respectively. By adopting the wind load profile stipulated in the Code of Practice on Wind Effects: Hong Kong-1983, all the structural members are sized and detailed according to the British Standards BS8110 and the current local practices. The seismic displacement demand for the structure, when built on either rock or deep soil sites, was determined in a companion paper. The lateral load-displacement characteristic of the building, determined herein from manual calculation, has indicated that the poor ductility (brittle nature) of the mega-columns, due mainly to the high level of axial pre-compression as found from the analysis, cannot be effectively alleviated solely by increasing the quantity of confinement stirrups. The interstorey drift demands at lower and upper zones caused by seismic actions are found to be substantially higher than those arising from wind loads. The mega-columns supporting the TP and the coupling beams at higher zones are identified to be the most vulnerable components under seismic actions.

• Journal of the korean society of oceanography
• /
• 제36권4호
• /
• pp.101-108
• /
• 2001

Polybrominated diphenylether (PBDEs) congeners, 2,4,4'-TrBDE, 2,2',4,4'-TeBDE, 2,2',4,4',5-PeBDE, 2,2',4,4',5,5'-HXBDE, and 2,2',4,4',5,6-HxBDE, were measured in sediments from 52 stations in the southeastern coastal areas of Korea. Sediment samples were analyzed using gas chromatography coupled to mass spectrometer detector (GC/MSD) with positive electron impact (PEI) mode. New analytical methodology for PBDEs by the isotope dilution method was established using a multi-layer silica gel column chromatography. Total PBDEs levels in sediments for Pohang coast ranged from 1,1 to 33.8 ng/g dry weight (mean 5.3 ng/g dry), from 1.6 to 36.4 ng/g dry weight (mean 5.7 ng/g dry) for Ulsan coast, from 0.8 to 20.3 ng/g dry weight (mean 4.9 ng/g dry) for Busan coast, and from 0.8 to 10.3 ng/g dry weight (mean 4.4 ng/g dry) for Jinhae Bay. PBDEs contamination in surface sediments from Korean southeastern coasts was relatively moderate in comparison to that of other marine environment in the world. The predominant PBDE congeners were 2,2',4,4'-TeBDE and 2,2',4,4',5-PeBDE.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.9-16
• /
• 2005

In this paper, with loosely coupled transformer Relies-parallel resonant type DC/DC converter is analyzed and adopted to the power source of a TFLM(Transverse Flux Linear Motor). To get more efficient operating mode of the series-parallel resonant type DC/DC converter, theoretical analysis using normalized parameters are accepted. The analysis includes a specially made ferrite transformer with two separately wound half cores in order to evaluate analytically and experimentally the changes in magnetizing the leakage fluxes and inductances caused by the distance between the halves. The proposed converter must be operated in switching Pattern III among the three switching patterns for the Zero Voltage Switching operation. According to Pulse Frequency Modulation(PFM) control method, the output voltage of the proposed circuit can be controlled. The results of the theoretical development are compared with practical measurements from a prototype system.

• Fisheries and Aquatic Sciences
• /
• 제1권1호
• /
• pp.48-62
• /
• 1998

Seasonal volume transport on the Texas-Louisiana continental shelf is investigated in terms of objectively fitted transport streamfunction fields based on the current meter data of the Texas­Louisiana Shelf Circulation and Transport Processes Study. Adopted here for the objective mapping is a method employing a two-dimensional truncated Fourier representation of the streamfunction over a domain, with the amplitudes determined by least square fit of the observation. The fitting was done with depth-averaged flow rather than depth-integrated flow to reduce the root-mean-square error. The fitting process filters out $11\%$ of the kinetic energy in the monthly mean transport fields. The shelf-wide pattern of streamfunction fields is similar to that of near-surface velocity fields over the region. The nearshore transport, about 0.1 to 0.3 Sv $(1 Sv= 10^6\;m^3/sec)$, is well correlated with the seasonal signal of along-shelf wind stress. The spring transport is weak compared to other seasons in the inner shelf region. The transport along the shelf break is large and variable. In the southwestern shelf break, transport amounts up to 4.7 Sv, which is associated with the activities of the encroaching of energetic anticyclonic eddies originated in Loop Current of the eastern Gulf of Mexico. The first empirical orthogonal function (EOF) of streamfunction variability contains $67.3\%$ of the variance and shows a simple, shelf-wide, along-shelf pattern of transport. The amplitude evolution of the first EOF is highly correlated (correlation coefficient: 0.88) with the evolution of the along-shelf wind stress. This provides strong evidence that the large portion of seasonal variation of the shelf transport is wind-forced. The second EOF contains $23.7\%$ of the variance and shows eddy activities at the southwestern shelf break. The correlation coefficient between the amplitudes of the second EOF and wind stress is 0.42. We assume that this mode is coupled a periodic inner shelf process with a non-periodic eddy process on the shelf break. The third EOF (accounting for $7.2\% of the variance) shows several cell structures near the shelf break associated with the variability of the Loop Current Eddies. The amplitude time series of the third EOF show little correlation with the along-shelf wind.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.879-885
• /
• 2008

A rotordynamic analysis was performed with a decant-type centrifuge, which is a kind of industrial centrifuge. The system is composed of screw rotor, bowl rotor, driving motors, gear box, and support rolling element bearings. These rotors have a rated speed of 4300 rpm, and were modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis. Design goals are to achieve wide separation margins of lateral critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex analysis rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds and mode shapes, whirl natural frequencies, and unbalance responses under various balance grade. As a result of analysis, the rotordynamic analysis performed by separating a screw rotor and bowl rotor may cause an error in predicting critical speed of entire system. Therefore, the rotordynamic analysis of a coupled rotor combining a screw and bowl rotor must be performed in order to more accurately estimate dynamic characteristics of the decanter-type centrifuge as presented in this paper. Also, rolling element bearings with suitable stiffness should be selected to keep enough separation margin. In addition, in establishing balance grade of a screw and bowl rotor, ISO G2.5 balance grade is more recommended than ISO G6.3, in particular balancing correction of a screw rotor based on ISO G2.5 grade is strongly recommended.

• 전자공학회논문지D
• /
• 제36D권11호
• /
• pp.18-26
• /
• 1999

최근, 유사 빔 전파방법이나 비 직교성 결합모드이론과 같은 다양한 근시적 해석법들이 중첩모드에 기초한 테이퍼 방향성 결합기의 그 광학적 특성을 분석하기 위하여 제안되어 왔다. 비록, 이들 접근 방식들이 특별한 구조에서 충분히 정확한 결과들을 제공하지만 테이퍼 전송 구조와 같은 민감한 광 소자 해석에는 불충분하다. 이를 위하여, 우리는 그 방향성 결합기의 전력전송을 정확하게 해석하기 위하여 새롭게 발전된 모드 전송선로, 해석법을 소개하고 이용하고자 한다. 이를 이용한 수치 해석 결과 대칭인 두 테이퍼 채널의 간격이 증가함에 따라 우/기 모드의 전파상수는 하나의 값으로 수렴하였다. 더욱이, 테이퍼 각도가 ${\theta}=0.1^{\circ}$일 때 하나의 전송 채널을 통하여 입사된 모드의 97%가 다른 전송 채널로 전송되었고, 그 기운 각도가 증가함에 따라 전력 전송은 현저하게 감소하였다.

• ETRI Journal
• /
• 제38권5호
• /
• pp.981-987
• /
• 2016

We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.

• 한국지진공학회논문집
• /
• 제15권3호
• /
• pp.1-9
• /
• 2011

자기부상열차가 중 저속 및 초고속 주행 시 차량의 주행특성 및 교량의 동적 응답 결과를 제시하고자 한다. 수직 자유도 및 회전 자유도를 포함한 10자유도 자기부상열차에 대한 운동방정식을 유도하고, 모드 중첩법을 이용하여 교량의 운동방정식을 구성하였다. 또한 제어 방법으로 UTM01제어기법을 적용하여 수치해석을 수행하였다. 해석 예제로 노면조도, 가이드웨이의 처짐비, 차량 속도 등이 교량의 처짐과 차량의 부상공극 및 여러 가지 변수에 미치는 영향을 파악하였다. 부상공극은 조도의 조건에 따라 그 차이가 확연히 드러나고 또한 자기부상열차의 속도가 증가함에 따라 부상공극이 증가함을 알 수 있었다. 그리고 자기부상열차가 중, 저속 주행 시에는 교량에 대한 영향이 미비하지만 초고속 주행 시 교량에 대한 동적확대계수가 큰 값을 보여주었다.