• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1403-1412
• /
• 2019

A coupled inductor-dual boost-inverter (CIDBI) with a differential structure has been presented for application to a micro-inverter photovoltaic module system due to its turn ratio of a high-voltage level. However, it is difficult to design a CIDBI converter with a conventional PI regulator to be stable and achieve good dynamic performance, given the fact that it is a high order system. In view of this situation, a sliding mode control (SMC) strategy is introduced in this paper, and two different sliding mode controllers (SMCs) are proposed and adopted in the left and right side of two Boost sub-circuits to implement the corresponding regulation of the voltage and current. The schemes of the SMCs have been elaborated in this paper including the establishment of a system variable structure model, selection of the sliding surface, determination of the control law, and presentation of the reaching conditions and sliding domain. Finally, the mathematic analysis and the proposed SMC are verified by experimental results.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1225-1232
• /
• 2000

본 논문에서는 Whispering Gallery 모드 (이하 W. G. 모드) 공진기의 종진주파수 간격(Free Spectral Range : FSR)을 확장시키기 위한 새로운 형태의 복합공진기를 제안한다. 제안된 복합공진기는 두 개의 유전체 원판으로 구성되며, 복합공진기의 공진주파수는 두 개의 원판 각각의 공진 조건을 동시에 만족시키는 주파수가 되므로 공진주파수의 간격이 확장된다. 제안된 복합 공진기 이론으로 K-Band 원판공진기 및 유전체 도파로를 제작.실험으로 본 논문의 타당성을 밝힌다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.900-903
• /
• 2002

This study dealt with the experimental modal analysis of the perforated rectangular plate coupled with fluid. The natural frequencies of the perforated plate and solid plate in air were obtained by the analytical method based on the relation between the reference kinetic and maximum potential energy and compared with the experimental results. Good agreement between the results was found for the natural frequencies of the perforated plate in air. It was empirically found the natural frequencies of the perforated plate coupled with fluid. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. Additionally, the effect of distance between perforated plate and solid plate on the fluid-coupled natural frequency was investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.313-316
• /
• 2000

Concentric-Circle-Grating (CCG) cavity is analyzed by coupled mode theory. In this case concentric grating is acting as both feedback element and output coupler. In our calculations radiation loss terms are included in guided coupled mode equations. The surface-emitted field distribution is obtained in self-consistent manner.

• Journal of electromagnetic engineering and science
• /
• 제4권1호
• /
• pp.30-36
• /
• 2004

We determined equivalent circuit parameters of a 1.5 cell S-band RF gun cavity from the resonant characteristics of its decoupled cavities(half cell and full cell) using the code SUPERFISH. Equivalent circuit parameters of the 1.5 cell RF gun cavity resonated in the 0-mode were obtained easily from the circuit parameters of each decoupled cavities. In order to obtain equivalent circuit parameters for the $\pi$ -mode cavity, we calculated the differences of the resonant frequencies and the equivalent resistances between the 0- and $\pi$ -modes with slight variations of the radius and thickness of the coupling iris. From those differences, we obtained R/Q value and equivalent resistance of the $\pi$ -mode, which are directly related to the equivalent circuit parameters of the coupled cavity. Using calculated R/Q value, we can express equivalent inductance, capacitance and resistances of the RF gun cavity resonated in the $\pi$ -mode, which can be useful for analyzing coupled cavities in a steady state.

• 한국광학회지
• /
• 제14권5호
• /
• pp.521-529
• /
• 2003

Complex-coupled(CC) DFB 레이저의 경우 문턱 전류에서 spatial hole burning (SHB)현상을 나타내는 f 계수를 고려하여 구한 단일 모드 수율과 문턱 전류 이상에서의 단일 모드 수율과의 연관성이 존재하지 않음을 알 수 있었다. 문턱 전류에서 f 계수를 고려하여 구한 in-phase (IP) CC DFB 레이저와 anti-phase (AP) CC DFB 레이저의 단일 모드 수율은 일치하였으나 문턱 전류 이상에서는 큰 차이를 보였다. 문턱 전류 이상에서 IP CC DFB 레이저의 단일 모드 수율은 결합 계수 비가 증가할수록 증가하였다 반면에 AP CC DFB 레이저의 경우 결합 계수 비에 관계없이 주입 전류가 증가하면 단일 모드 수율은 급격히 감소함을 알 수 있었다. 양 단면 반사율 조합이 AR-HR인 경우 결합 세기가 작을수록 AR 단면의 반사율이 단일 모드 수율에 미치는 영향이 크게 나타났다. 결합 세기가 작을수록 단일 모드 수율의 증가율이 완만해지기 시작하는 결합 계수 비가 커졌고 또한 최대 단일 모드 수율이 증가하였다 양 단면 반사율 조합이 AR-HR과 AR-AR의 경우가 AR-CL과 CL-CL인 경우에 비하여 단일 모드 수율이 크게 나타났다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.194-197
• /
• 1986

The normal mode parameters of microstrip coupled lines are datermined from the self and mutual capacitance and inductance of microstrip lines. In this paper, these capacitance are computed by using the relaxation method based on Quas1-TEM model for shoelded structure. Using these results, the normal mode parameters of two and three microstrip coupled lines are obtained.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1254-1259
• /
• 2008

A new CMOS current-mode integrator for low-voltage analog integrated circuit design is presented. The proposed current-mode integrator is based on cross-coupled gain-boosting topology. When it is compared with that of the typical current-mirror type current-mode integrator, the proposed current-mode integrator achieves high current gain and unity gain frequency with the same transistor size. As a application circuit of the proposed integrator, we designed the 1.8V 200MHz band current-mode lowpass filter. These are verified by Hspice simulation using $0.18{\mu}m$ CMOS technology.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.696-701
• /
• 2014

In this study, in order to develop coupled vibration mode piezoelectric devices for Acoustic Emission (abbreviated as AE) sensor application with outstanding displacement and piezoelectric properties have been simulated by ATILA FEM program. And, From the results of ATILA simulation, the AE sensor specimen, obtained superior electromechanical coupling factor and displacement, when the size of specimen is $3.45mm{\Phi}{\times}3.45mm$ with ratio of diameter/thickness(${\Phi}/T$)= 1.0. Therefore, AE sensor was fabricated by (Na,K,Li)(Nb,Ta) $O_3$(abbreviated as NKL-NT) system piezoelectric ceramics using coupled vibration mode. The piezoelectric properties of NKL-NT ceramics was exhibited that piezoelectric constant($d_{33}$), piezoelectric voltage constant($g_{33}$) and electro mechanical coupling factor($k_p$) have the excellent values of 261[pC/N], 40.10[$10^{-3}Vm/N$], and 0.44, respectively. The manufactured piezoelectric device with ratio of ${\Phi}/T$= 1.0 indicated the optimum values of resonant frequency(fr)= 556.5[kHz], antiresonant frequency(fa)=631.1[kHz], and effective electromechanical coupling factor(keff)= 0.473. The maximum sensitivity of the coupled vibration mode AE sensor was 55[dB] at the resonant frequency of 75[kHz]. The results show that the coupled vibration mode piezoelectric device is a promising candidate for the application AE sensor piezoelectric device.

• 대한전자공학회논문지
• /
• 제9권2호
• /
• pp.1-16
• /
• 1972

본논문은 특성임퍼이던스가 선형적으로 변화하는 단일 Strip선로의 특성파라미터를 이용하여, 우선 even-mode 및 odd-mode임피이던스가 모두 선형적으로 변화하는 비대칭형인 결합Strip선로의 특성파라미터를 구하였다. 다음에는 상기한 비대칭결합Strip선로를 종속연결한 대칭형결합Strip선로를 구성하고, 선로단자조건에 따라서 결합Strip선로가 갖는 여파특성을 고찰하였다. 선형 결합Strip선로의 특성을 해석한 결과, 선형결합Strip선로는 균일Strip선로를 사용하는 경우에 비하여 몇가지 점에서 좋은 여파특성을 갖고 있음을 명시하였다.