• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.185-188
• /
• 1998

A three-waveguide coupler consisted of a central guide and two side guides is theoretically explored by using modal transmission-line theory. The numerical results reveal that the coupling length Lc is different from that calculated by coupled-mode theory and the difference increases gradually as the guiding modes increase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2404-2406
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations of a T or ${\pi}$ type power line are investigated. Since the synchronization of the power line system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the power line transmission system caused by the line parameters L and C

• 한국통신학회논문지
• /
• 제11권2호
• /
• pp.146-151
• /
• 1986

광대역 DC블록에 응용되는 깍지낀 복수 결합스트？？선구조에 관한 해석방법을 소개했다. 결합된 마이크로 스트\ulcorner\ulcorner선의 준 TEM파라미터를 사용해서 계산한 전송계수의 정확한 주파수 응답을 구했다.

• 한국전자파학회논문지
• /
• 제18권2호
• /
• pp.191-198
• /
• 2007

PCB 설계시 전송선간에 발생하는 전자기적 결합 현상은 장비의 동작을 저감시키는 요인이 될 수 있다. 이런 결합 현상은 전송선과 라이저를 통해 흐르는 전류에 의해 생기는 전자기계에 의해 발생한다. 본 논문에서는 PCB상에 놓여 있는 굽은 결합 선로의 누화를 해석하기 위한 개선된 방법을 제안하고 고찰해 보고자 한다. 굽은 결합 선로에 대한 기존의 누화 해석은 굽은 결합 선로의 굽은 지점을 기준으로 각 구간으로 나누고 각 구간을ABCD 행렬로 나타내어 이를 직렬 연결한 방법을 이용하였다. 하지만 본 논문에서 제안하는 누화 해석 방법은 기존의 방법과는 달리 결합 현상을 계산할 때의 결합 구간을 소스가 인가되는 전송선을 인접한 전송선으로 수직 투영시킨 구간만이 아닌 인접한 전송선의 전 구간에 영향을 준다고 보고 계산을 하는 개선된 회로 접근법에 의해 계산하였다. 마지막으로, 몇 가지 굽은 결합 선로 모델들에 대해서 계산한 결과와 측정한 결과를 비교함으로써 본 논문에서 제안하는 누화 해석 방법의 타당성을 보였다.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.14-21
• /
• 1997

The crosstalk among three identical uniform coupled microstrip transmissiom lines is examined. To analyze the crosstalk, the simultaneous equations for the voltage and current waves on each transmission line are induced from the transmission line equation. The capacitance and the inductance of the line to solve the transmission line equation are calculated by the spectral domain analysis and the space domian analysis. There are three quasi-TEM modes is three microstrip transmission lines and the characteristics mode impedences in each mode are almost equal at a weak coupling state. The crosstalk among three identical microstrip transmission lines is calculated varying the frequency from 50MHz to 3GHz.

• 한국전자파학회논문지
• /
• 제22권5호
• /
• pp.510-515
• /
• 2011

본 논문에서는 사각형 모양으로 공간 활용성이 높은 콤팩트한 구조를 갖는, 슬롯이 있는 삼각 패치형 인공전송 선로 결합기를 제안한다. 일반적인 결합기는 ${\lambda}$/4 길이의 전송 선로를 사용하기 때문에 소형화의 한계를 가지고 있으나, 이 구조는 ${\lambda}$/4보다 작은 길이일 때 결합기가 최대 결합도를 갖는 특징을 나타내어 소형화에 유리할 뿐만 아니라, 슬롯의 길이를 변화시킴으로써 설계상에 임피던스와 위상 조절에 용이하도록 하였다. 제시된 인공 전송 선로 결합기의 설계 방법을 바탕으로 중심 주파수 2.4 GHz에서 15 dB의 결합기를 시험 제작하여 제시된 방법의 유용성을 보였다.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.543-552
• /
• 2010

Modified compact combline bandpass filters are proposed based on the miniaturized quarter-wave transmission line which is composed of the parallel coupled line and lumped capacitors. The electrical length of the parallel coupled line in a resonator, which determines the size of combline bandpass filters, is just $5^{\circ}$ or $7^{\circ}$, resulting in a compact circuit area. The designed combline bandpass filter also has a wide upper stopband by suppressing the spurious passbands, not moving. Measured results of two fabricated filters centered at 400MHz show good agreement with the theoretical predications.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.91-96
• /
• 2011

In this paper, we propose a microstrip bandpass filter using stepped-impedance coupled-line hairpin resonators. The stepped-impedance coupled-line hairpin resonator has extended harmonic suppression in comparison with a conventional hairpin resonator due to transmission zero and the movement of harmonic frequencies resulting from the stepped-impedance characteristic. A high-pass type impedance/admittance inverter is employed in order to improve the lower frequency skirt characteristics of the passband. A 4-pole bandpass filter is designed and fabricated at 1.8 GHz. The measured results show the excellent attenuation performance at the stopband which is greater than 30 dB up to 10 GHz.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.41-45
• /
• 2018

In this study, a short-ended coupled line with a short-circuit stub transmission line bandpass filtering impedance transformer is presented. The general designed equations are derived on the basis of circuit theory. The design curves are provided to examine the characteristic of the proposed impedance transformer. The proposed circuit is suitable for high termination impedance. To validate the design formulas, a $400-50{\Omega}$ impedance transformer is designed and fabricated at the operating center frequency ($f_0$) of 2.6 GHz. The measured results show a good agreement with the simulation. The measured insertion and return losses are 0.6 dB and 22.5 dB at $f_0$, respectively. The measured return loss is higher than 20 dB within the passband frequency of 2.51-2.7 GHz. Moreover, the stopband attenuation is higher than 25 dB from DC to 1.64 GHz of the lower stopband and from 3.12 GHz to 6.4 GHz of the higher stopband.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.721-723
• /
• 1999

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and a equivalent wire synchronizations are investigated Since the synchronization of the wire transmission system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the wire transmission system caused by the line parameters L and C.