• 한국통신학회논문지
• /
• 제11권2호
• /
• pp.146-151
• /
• 1986

광대역 DC블록에 응용되는 깍지낀 복수 결합스트？？선구조에 관한 해석방법을 소개했다. 결합된 마이크로 스트\ulcorner\ulcorner선의 준 TEM파라미터를 사용해서 계산한 전송계수의 정확한 주파수 응답을 구했다.

• ETRI Journal
• /
• 제27권3호
• /
• pp.250-256
• /
• 2005

A novel planar polarization-agile microstrip subarray is proposed and its performance assessed by a thorough numerical investigation. The subarray consists of five square patches with a central element, directly coupled to a pair of microstrip feed lines by a cross-shaped aperture, which spreads the power outwards to the other patches through a network of suitable connections. By properly exciting the antenna at its input ports, any kind of polarization of the radiated field can be accomplished with fairly low cross-polarization levels. Moreover, since only two feed lines are required to drive the whole subarray, polarization agility is simply and attractively achieved by a single phase-shift circuit. The design concept is described and the results of the analyses and simulations performed by two completely independent full-wave approaches are presented and discussed.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.47-55
• /
• 1995

Proximity-coupled open-end microstrip interconnections in bilevel planar structures are investigated through three-dimensional finite-difference time-domain(3D-FDTD) method. Three types of EMC (electromagnetically coupled) microstriplines are considered, collinear lines, transverse lines and modified EMC structure. From the analyzed results, it is found that these EMC interconnections have the coupling coefficient enough to interconnect lines in bilevel structures over a broad-band. The computed results of the modified EMC structure was compared with measurement from physical model and the computed results of via hole interconnection.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.110-113
• /
• 1986

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.31-38
• /
• 1992

In this paper, numerical analysis package using Time-Domain Finite Difference (TDFD) method is developed to solve the initial value problem of Maxwell's equation and applied to several microstrip structures. TDFD allows us to show graphically the evolution of the crosswalk between microstrip lines. Moreover, we can obtain transmission line parameters and scattering parameters through Fourier transform of TDFD results in easy and efficient ways. TDFD is successfully applied to :1) wide band electromagnetic wave propagation along the single microstrip line, 2) crosswalk analysis between two microstrip lines, and 3) three metal line side-coupled filter. Our results show much better agreement with other theoretical experimental results reported in the literature. Thus we expect that TDFD is very useful to designing MMIC(Monolithic Microwave Integrated Circuit).

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.529-534
• /
• 2002

Recently, As the higher frequency in clock of digital system being demanded and the density of circuits gets high for purpose of making light and minimizing system, the study for solution of digital signal distortion being interested. In this paper, the distortion of square pulse caused by dispersion as it propagates along a single microstrip line and crosstalk between lines on the Multi-Transmission Lines (MTL) is investigated. The dispersion and crosstalk of pulse signals is analyzed regarding to the structure of transmission line such as relative permittivity, substrate height, strip width of the microstrip line and pulse width of signal pulse.

• ETRI Journal
• /
• 제44권2호
• /
• pp.260-273
• /
• 2022

This study presents a novel multilayer structure of parallel coupled-line bandpass filtercentered at 2.42 GHz with a fractional bandwidth value of approximately 19.4%. The designed filter can suppress harmonics with an appropriate frequency response by incorporating different techniques based on the multilayer technique. A combination of different techniques such as radial microstrip stubs and defected ground structure (DGS) and defected microstrip structure techniques are employed to suppress harmonics up to 5f₀. These techniques are used in two layers to suppress up to 5f₀. In addition, in this study, the effects of different parameters, such as the width of slot-line DGS, the angle of diagonal line slots in the upper layer, and the air gap between the two layers on the filter performance, are investigated. To verify the correct circuit operation, the designed filter is implemented and tested. The measurement results of the proposed filter are compared with the simulation results.

• 한국통신학회논문지
• /
• 제18권4호
• /
• pp.585-590
• /
• 1993

비대칭 결함선로의 등가회로 파라미터와 대역통 필터에 필요한 소자값을 대응시켜 3개의 공진기로 구성되는 광대역통과 필터를 실현시켰다. 중심주파수 9GHz에서 정규화 대역폭은 22%로 설계하였고 Supercompact을 이용하여 최적화하고 제작 실험한 결과 대역폭과 반사손실은 설계값과 잘 일치하였으나 삽입손실에서 0.7dB 정도의 차이가 있었다.

• 한국통신학회논문지
• /
• 제18권11호
• /
• pp.1663-1668
• /
• 1993

단일종단 저역통과 필터의 설계이론을 기초로 비대칭으로 결합된 마이크로스트립 선로를 사용하여 X-band용 인접대역 다이플랙서를 실현시켰다. 중심주파수 9,11 GHz에서 채널 1과 2의 대역폭을 각각 22%와 18%로 설계하였고 SuperCompack을 이용하여 최적화하였다. 측정결과 통과 대역폭과 인접하는 채널의 차단대역에서 감쇄특성은 설계값과 잘 일치하였으나 삽입손실에서 0.5dB 정도의 차이가 있었다.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.598-604
• /
• 2011

본 논문은 연결된 결합 선로를 이용하여 브랜치 선로 결합기를 소형화하는 방법을 제시하였다. 이 방법은 기존 마이크로스트립 브랜치 선로 결합기에 사용되는 ${\lambda}/4$ 선로를 같은 특성을 갖는 연결된 결합 선로로 대신한 방법이다. 연결된 결합 선로는 우-기 모드 해석 방법을 기반으로 Z 파라미터와 T 등가 회로로 분석하였다. 이 결과를 이용하여 연결된 결합 선로를 갖는 브랜치 선로 결합기를 중심 주파수 2.4 GHz에서 FR4 기판으로 설계하고 제작하였다. 실험 결과는 이론값과 잘 일치했다. 그리고 실험 결과, 기존 단일 마이크로스트립 선로로 구현된 결합기보다 37 % 크기가 줄어들었음을 확인할 수 있었다. 이 방법은 앞으로 이동 통신 빔 형성 안테나의 급전선인 Butler Matrix의 크기를 줄이는 방법으로 사용 가능하리라 사료된다.