• 산업기술연구
• /
• 제16권
• /
• pp.239-245
• /
• 1996

Modal parameters determine the frequency response characteristics of vibration system or acoustic system. When the two systems are fully coupled, however, coupling changes the vibrational and acoustic model parameters into those of the coupled system. In this case, it is very difficult to obtain the modified model parameters and response characteristics. In this paper, coupling effect is analytically investigated on the natural frequency, mode and frequency response characteristics. The result can be applied to understand and to design the frequency response characteristics of the vehicle passenger compartment.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.315-316
• /
• 2006

The modulation bandwidth, wavelength chirp of directly modulated coupled-ring reflector laser diode have been investigated using time-domain modeling. For a specific design, the modulation frequency could be 6 GHz and the frequency chirp could be in the range of $120^{\sim}200$ MHz/mA.

• 한국전자파학회논문지
• /
• 제19권8호
• /
• pp.862-877
• /
• 2008

두 종류의 넓은 대역폭을 갖는 ring hybrids(하나는 coupled line이 포함되어 있고, 다른 하나는 left-handed transmission line을 포함한 ring hybrids)가 비교되었으며, 비교 결과로부터 coupled line을 포함한 ring hybrid가 모든 면에서 우수한 특성을 가짐을 보여줬다. 그러나, coupled line을 포함한 ring hybrid는 -3 dB coupling power를 가질 경우에 한해서만이 perfect matching이 이루어지기 때문에, perfect matching을 갖는 coupled line ring hybrid는 2차원으로 구현하기는 거의 불가능하다. 이 문제를 해결하기 위해서 coupled line을 해석했고, 그 해석 결과로부터 coupling coefficient에 관계없이 어느 경우에도 perfect matching을 이룰 수 있는 설계 식을 유도했다. 이 설계식을 이용하여, transmission line의 길이가 ${\pi}$보다 큰 경우에도 적용될 수 있는 크기를 줄이기 위한 새로운 형태의 transmission line 등가회로를 제시했다. 이 새로운 형태의 transmission line의 등가회로를 이용하면 기존의 ring hybrid의 $3\;{\lambda}/4$의 transmission line을 줄이는 데 사용할 수 있기 때문에 ring hybrid의 크기를 더욱 줄이는데 장점이 될 수 있다. 이 등가회로를 증명하기 위해서, coupling power를 고정하고 또는 transmission line의 길이를 고정하는 2가지 형태의 simulation을 하였으며, 대역폭은 coupled line의 coupling power에 직접적인 상관 관계가 있음을 보였다. 기존의 등가회로와 새로운 형태의 등가회로를 이용하여, 작고 넓은 대역폭을 가지는 ring hybrid를 제시하였다. 새로 제시된 ring hybrid를 이용하여, 기존의 ring hybrid와 비교하였다. 비교 결과로부터, 본 논문에서 제시한 ring hybrid의 전체 ring 둘레가 1/3보다 더 작음에도 불구하고, 대역폭이 훨씬 넓음을 보여줬다. 작고 넓은 대역폭을 가지는 ring hybrid를 측정했으며, 측정 결과는 -2.78 dB, -3.34 dB, -2.8 dB, -3.2 dB의 power division 특성을 보여줬으며, matching과 isolation은 20 % 이상의 대역폭에서 -20 dB보다 좋은 특성을 보여줬다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.393-396
• /
• 2000

Repeater Duplexer of 800MHz band consists of 4pole transmitter band pass filter, receiver band pass filter and branch circuit. Circuit parameter of Duplexer such as coupled capacitance of equivalent circuit was drawn out and used to coupled line characteristics impedance (Zoo, Zoe) that satisfied resonator condition and attenuation condition. Simulation was carried out by the ADS(Advanced Design System) were obtained good attenuation characteristics (869~894MHz： 65㏈(Min.),824~349MHz： 65㏈(Min.)

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.150-154
• /
• 2011

In this paper a four-pole elliptic function bandpass filter is designed with two ground slots. A research of microstrip bandpass filters (BPF) using defected ground structures (DGS) is presented. DGS technique allows designs of tight couplings without the necessity of using very narrow coupling gaps. The simulator Sonnet is used to design the resonator and to calculate the coupling coefficient of the basic coupling structure. Compared to similar microstrip filters without defected ground structure, the simulated performances of these novel structures indicate some technological advantages.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.24-28
• /
• 1992

A new design method of microstrip wide band VHF tunable bandpass filters using varacter diodes is presented. In the proposed filter both the input and output ports are coupled through capacitors, and an open micro-strip line is inserted between the coupled line in order to obtain the desired degree of coupling. The optimized filter responseses for the frequency range of 220-404MHz by TOUCH-STONE are compared with the measured ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.412-417
• /
• 1992

In this paper, we present a method to design a coupled autopilot for STT missiles which have severe aerodynamic cross-coupling. The aerodynamic model is derived in the meneuver plane and, based on that model, an autopilot scheduled by the normal acceleration and the estimated bank angle is designed. Bank angle is obtained by a simple estimator. With the proposed autopilot, it is shown by computer simulations that induced moments are properly compensated and the performance is supiorior to the conventional autopilot.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.207-210
• /
• 1999

In this paper, aperture coupled microstrip antenna which has a larger bandwidth was designed using genetic algorithms. The genetic algorithms encodes each parameters which are the width, length of patch and the width, length of slot, into binary sequences, called a gen. Genetic algorithms searches a optimal gen to design a larger bandwidth. Simulation results are compared with Pozar's results.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.298-308
• /
• 1987

非均質性 媒質에 인덕티브와 캐패시티브의 結合係數를 동일하게 설계함으로 理想的인 非對稱方向性結合器의 實現을 가능케 함을 증명하고 非對稱方向性結合器의 設計節次와 例를 들었다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제4권
• /
• pp.85-104
• /
• 1995

In a loosely-coupled distributed database server system, a server failure and/or a communication failure can be masked by a resiliency mechanism. Recognizing that a distributed transaction executes at several servers during its lifetime, we propose a resiliency mechanism which allows continuous transaction processing in distributed database server systems in the presence of a server failure. The resiliency mechanism for transaction processing is achieved by keeping redundant information using a primary/backup approach. The purpose of this paper is to analyze the performance improvement opportunities with the resiliency mechanism and to present the design of the proposed system.