• Computers and Concrete
• /
• v.18 no.2
• /
• pp.165-178
• /
• 2016

The present work is concerned with a numerical investigation of the behaviour of reinforced-concrete beams with non-bonded flexural tension reinforcement. The numerically-established behaviour of such beams with and without transverse reinforcement is compared with its counterpart of similar beams with bonded reinforcement. From the comparison, it is found that the development of bond anywhere within the shear span inevitably leads to inclined cracking which is the cause of 'shear' failure. On the other hand, the lack of bond within the shear span of the beams is found, not only to prevent cracking within the shear span, but, also, to lead to a flexural type of failure preceded by the formation of horizontal splitting of concrete in the compressive zone. It is also found that delaying the extension of horizontal splitting through the provision of transverse reinforcement in the beam mid span can lead to flexural failure after yielding of the tension reinforcement. Yielding of the tension reinforcement before the horizontal splitting of the compressive zone may also be achieved by reducing the amount of the latter reinforcement.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.105-112
• /
• 2018

The purpose of this study is to develop an application that supports a user in the maintenance of small photovoltaic device. To this end, this study analyzed the maintenance status, related regulations and existing application contents in Korea. According to the analysis results, most users did not maintain device for themselves. In addition, the maintenance market has not been activated due to its low profitability. Regulations on the maintenance of photovoltaic device prescribed by the KESCO and Japanese counterpart were analyzed to establish the standards for photovoltaic device inspection, and an application was developed based on the existing applications and research results. In order to evaluate the completeness and satisfaction of the developed application, it surveyed 52 users and 22 experts. The survey results showed that the completeness was calculated to be 90 points, and the level of satisfaction was 93 points on a 100-point scale. Therefore, it is expected that the maintenance application developed in this study will be useful for users to maintain the photovoltaic device.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.837-848
• /
• 2022

Analog circuit design is comparatively more complex than its digital counterpart due to its nonlinearity and low level of abstraction. This study proposes a novel low-level hybrid of the sine-cosine algorithm (SCA) and modified grey-wolf optimization (mGWO) algorithm for machine learning-based design automation of CMOS analog circuits using an all-CMOS voltage reference circuit in 40-nm standard process. The optimization algorithm's efficiency is further tested using classical functions, showing that it outperforms other competing algorithms. The objective of the optimization is to minimize the variation and power usage, while satisfying all the design limitations. Through the interchange of scripts for information exchange between two environments, the SCA-mGWO algorithm is implemented and simultaneously simulated. The results show the robustness of analog circuit design generated using the SCA-mGWO algorithm, over various corners, resulting in a percentage variation of 0.85%. Monte Carlo analysis is also performed on the presented analog circuit for output voltage and percentage variation resulting in significantly low mean and standard deviation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.366-369
• /
• 2022

The glut of information aggravated the process of data analysis and other procedures including data mining. Many algorithms were devised in Big Data and Data Mining to solve such an intricate problem. In this paper, we conducted research about the comparison of several similarity measures and community detection algorithms in collaborative filtering for movie recommendation systems. Movielense data set was used to do an empirical experiment. We applied three different similarity measures: Cosine, Euclidean, and Pearson. Moreover, betweenness and eigenvector centrality were used to detect communities from the network. As a result, we elucidated which algorithm is more suitable than its counterpart in terms of recommendation accuracy.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.44.1-44.1
• /
• 2021

The Cosmic Microwave Background (CMB) contains a wealth of information about the perturbations in the early universe. Its bispectrum, the Fourier counterpart of three-point correlation functions, is a direct probe of primordial non-Gaussianity predicted by many physically well motivated inflation models. Motivated by the substantial improvement in sensitivity expected from future CMB surveys, we developed a novel bispectrum estimator capable of handling such high-resolution data. Our code, named CMB-BEst, utilises a set of separable basis functions to constrain a wide variety of models simultaneously. Flexibility in the choice of basis enables targeted analysis on highly oscillatory inflation models, which are previously unconstrained due to the numerical and computational challenges involved. We present the results of our thorough validation tests, both internal and against conventional approaches. We provide a proof-of-concept example with Planck satellite data and sketch out the road ahead.

• Educational Technology International
• /
• v.10 no.2
• /
• pp.107-125
• /
• 2009

This study seeks to prove three points through the research. The first point is to examine the changes of international attitudes with actual experiences using synchronous international distance learning. The second point is to examine the effectiveness of a synchronous international distance system. And the final point is to compare international attitudes among middle school and undergraduate school students in Korea and Japan. The study used the DVTS for audio and video communication tools and automatic translating chat as a text communication tool. This combination of communication tools was very effective for students from both countries to communicate for international collaborative learning activities. The study found several interesting patterns of attitude change from the results of the study. For whole category analysis, there are positive changes in four categories of international attitudes: consciousness to foreign countries, consideration for other's viewpoints, motivation for international education, and recognition for the counterpart country. However, there was no change in the nationality category.

• Journal of Microbiology
• /
• v.33 no.2
• /
• pp.136-141
• /
• 1995

From a cluster of structural rRNA genes which has previsouly been cloned (Hwang and Kim, in submission; J. Microbiol. Biotechnol.), a 1.0-kb Eco RI fragment of DNA which shows significant homology to the 25S and rRNA s of Tricholoma matsutake was used for sequence analysis. Nucleotide sequence was bidirectionally determined using delection series of the DNA fragment. Comparing the resultant 1016-base sequence with sequences in the database, both the 3'end of 25S-rRNA gene and 5S rRNA gene were searched. The 5S rRNA gene is 118-bp in length and is located 158-bp downstream of 3'end of the 25S rRNA gene. IGSI and IGS2 (partial) sequences are also contained in the fragment. Multiple alignment of the 5S rRNA sequences was carried out with 5S rRNA sequences from some members of the subdivision Basidiomycotina obtained from the database. Polygenetic analysis with distance matrix established by Kimura's 2-parameter method and phylogenetic tree by UPGMA method proposed that T. matsutake is closely related to efibulobasidium allbescens. Secondary structure of 5S rRNA was also hypothesized to show similar topology with its generally accepted eukaryotic counterpart.

• Journal of the Korean Dietetic Association
• /
• v.3 no.1
• /
• pp.63-73
• /
• 1997

This study was conducted to evaluate the industry foodservice management practices and to suggest guidelines for the effective foodservice management. The survey for the analysis was conducted through the questionnaires to dietitians. They were divided into two groups : the site color worker and the blue color worker. The questionnaires were received for a response rate of 73.2%. Statistical data analysis was completed using the SAS programs for descriptive analysis, $x^2$ test, T-test, F-test, and Fisher's LSD. The results of the study can be summarized as follows : 1) The level of education of dietitians and food cost in the employee feeding operations for the blue color worker was lower than the employee feeding operations for the white color worker. 2) The labor productivity indices were not significantly different according to types of workers. But in the employee feeding operations for the blue color worker, full-time foodservice employees worked more than 10.7 hour per week than their counterpart. This indicates the full-time foodservice employees in the employee feeding operations for the blue color worker performed more loaded work compared to the employee feeding operations for the white color worker. 3) Equipped rate of facilities in the employee feeding operations for the blue color worker was low especially in the food preparation and cooking processes.

• Language and Information
• /
• v.9 no.2
• /
• pp.69-83
• /
• 2005

This paper discusses the distribution of a null complementizer C, as opposed to an overt counterpart 'that', presenting empirical support both for and against the PF-merge analysis of C proposed by Boscovic and Lasnik (2003, henceafter B&L) who in turn attribute to the proposal in Pesetsky (1992) and Halle & Marantz (1993). In Section I, as a background, I discuss B&L's proposal that a null complementizer C is a PF-affix which undergoes a PF-merger operation at the PF component. In Section 2, after a brief sketch of the distribution of a null C mostly in bare-relatives, I explore the possibility of extending B&L's analysis to accomodate the null C's in the bare-relative constructions. In Section 3, I argue that despite some empirical difficulties, B&L's analysis of a null C as a PF-affix can still be maintained, if Adverb Fronting is an operation to Spec-C position. Furthermore, I propose a rule - PF Spell-Out Constraint - to account for the C-trace (i.e. that-trace) effect in relative constructions. With the PF Spell-Out Constraint and B&L's PF-merge account, the distribution of a null C can better be analyzed.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1684-1698
• /
• 2018

Fragility functions are determined for braced steel moment frames (SMFs) with plans such as square-, T-, L-, U-, trapezoidal-, and semicircular-shaped, subjected to blast. The frames are designed for gravity and seismic loads, but not necessarily for the blast loads. The blast load is computed for a wide range of scenarios involving different parameters, viz. charge weight, standoff distance, and blast location relative to plan of the structure followed by nonlinear dynamic analysis of the frames. The members failing in rotation lead to partial collapse due to plastic mechanism formation. The probabilities of partial collapse of the SMFs, with and without bracing system, due to the blast loading are computed to plot fragility curves. The charge weight and standoff distance are taken as Gaussian random input variables. The extent of propagation of the uncertainties in the input parameters onto the response quantities and fragility of the SMFs is assessed by computing Sobol sensitivity indices. The probabilistic analysis is conducted using Monte Carlo simulations. The frames have least failure probability for blasts occurring in front of their corners or convex face. Further, the unbraced frames are observed to have higher fragility as compared to counterpart braced frames for far-off detonations.