• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.70-75
• /
• 2016

A swirler is a flame holding device generating recirculation regions in a gas turbine combustor, and the flow pattern due to a swirler has major effects on the flame distributions, combustion efficiency, and characteristics of exhaust gas. An experimental study for a counter-rotating swirler has been conducted to find out effects of the mass flow rate ratio of the inner/outer swirler flow area, the pressure difference between the swirler inlet and outlet, and the flare exit length ratio on the flow patterns in a model combustion chamber by using PIV(Particle Image Velocimetry) technique.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.346-351
• /
• 2000

Several solvents or combinations of solvents were tested for the extraction of wet or dried biomass at different extraction mode from plant cell cultures. Methanol gave the highest paclitaxel recovery with the least amount of solvent usage. before extraction drying of biomass wass helpful to decrease solvent usage in extraction step./ in this case drying method was very important to obtain high yield from dried biomass. In thid mode of operation counter-current extraction process can be able to decrease solvent usage but paclitaxel recovery was almost same with both batch and counter-current mode of operation. The number of extraction times was at least four to obtain high yield(>99%) from cell and one to obtain highyield(>96%) from cell debris in batch mode. Equilibrium (i.e. the ratio of paclitaxel in biomass to paclitaxel in the extraction solvent) was reached within 5 minutes. The minimum methodal concentration (90%) and solvent amount(biomass : solvent=1 Kg : 1L) are enough to obtain high yield(>98%) for extraction from biomass.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.233-239
• /
• 2013

This paper presents the analysis and control of the position of the COG (Center of Gravity) for a two-wheel balancing robot. The two-wheel balancing robot is required to maintain balance by driving two wheels only. Since the robot is not exactly symmetrical and its dynamics is changing with respect to moving parts, robust balancing control is difficult. Balancing performance becomes difficult when two arms hold a heavy object since the center of gravity is shifted out of the wheel axis. Novel design of a sliding waist mechanism allows the robot to react against the shift of the COG by moving the whole upper body to compensate for the imbalance of the mass as a counter balancer. To relocate the COG position accurately, the COG is analyzed by force data measured from two force sensors. Then the sliding COG mechanism is utilized to control the sliding waist position. Experimental studies are conducted to confirm the proposed design and method.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.348-355
• /
• 2016

Precision motion stages used in the manufacturing process of flat-panel displays have inevitably low settling performance due to their huge mass and bulky structures. In order to improve the settling performance, several methods of frame vibration compensation have been developed so far. These methods are used to cancel the vibration by imposing a counter force or modifying the resonance mode of the frame of the stage. To compensate the frame vibration, high force actuators are required. In this paper, a mighty voice coil actuator is proposed to generate the counter force against the frame vibration. The proposed voice coil actuator has an axis-symmetric rectangular structure to achieve a large force with simple and low cost fabrication. Also, the voice coil actuator allows radial clearance up to ${\pm}4mm$. Using an optimized design process and a magnetic circuit model, the power consumption is minimized while the required force is obtained. With a power of 322 W, the VCA has been designed to have a maximum force of 574 N with a force constant of 164 N/A. Experimental results verified the force constant of the fabricated voice coil actuator is well matched with the designed value.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.114-120
• /
• 2008

Recently, the nano-PM's number concentration emitted by diesel internal combustion engine has focused on attention because this particulate matters are suspected being hazardous of human health. In this study, The nano-PM mass and size of diesel passenger vehicles were measured on chassis dynamometer test bench. The particulate matters(PM) emissions of these vehicles were investigated by number concentration too. A condensation particle counter(CPC) system was applied to measure the particle number and size concentration of diesel exhaust particles at the end of dilution tunnel along the NEDC(ECE15+EUDC) and CVS-75 vehicle test mode. As the research result, the characteristic of vehicle test mode on the diesel nano-particle number and size distribution was investigated in this study.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.5
• /
• pp.515-528
• /
• 2003

The characteristics of one year observation aerosol data in Seoul, 200 I was studied using an OPC (Optical Particle Counter). The size resolved aerosol number concentrations of 0.3 ∼ 25 11m were measured. The results were compared with PM$_{10}$ mass concentration data under various meteorological conditions including dust and precipitation events. For fine particles whose diameter is less than 2.23 ${\mu}{\textrm}{m}$, the number concentration increases in the early morning which is considered due to transportation. while the coarse mode particles increase during daytime. This increase can be explained as local sources and human activities near sampling site. Hourly averaged data show that there exists diurnal variation. Generally, PM$_{10}$ data showed a similar tendency with OPC data. The size resolved OPC data showed that the particles of 0.5 ∼ 3.67 ${\mu}{\textrm}{m}$ are positively correlated with PM$_{10}$ data. The accumulated volume fraction of size resolved aerosol concentration in 0.5 ∼ 10 ${\mu}{\textrm}{m}$ showed that 0.5 ∼ 2.23 ${\mu}{\textrm}{m}$ particles occupied 59.2% of total aerosol volume of 0.5 ∼ 10 ${\mu}{\textrm}{m}$./TEX>.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.711-719
• /
• 2006

In this study, a 3D laser scanner is applied to evaluate of the stability of rock slope and to establish a adequate counter-method. From 3D scanning results, three dimensional digital data of rock slope is acquired, and then it is investigated for the engineering properties of discontinuities in rock mass. On the base of the result, we carry out the analysis of slope stability using the methods of the stereographic projection. In particular, the use of a 3D laser scanner is powerful about the slope on which person is difficult to approach because we can obtain the informations of discontinuities from the 3D digital data.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.72
• /
• pp.115-137
• /
• 2016

Trade can be greatly influenced by the change of international trade environment due to the characteristics of remote transactions. Furthermore, in the circumstance of emphasizing the national security again, the importance of the risk management of special materials has been increasing. As it was noted at Chapter 4, significant results such as the threat of enterprises' sustainable growth can be occurred when companies are related to the unlawful export of strategic materials or experience discouragement of export of main products. As the decision of strategic materials greatly depend on a specialized knowledge there is a possibility of misjudgement of strategic materials in terms of ordinary companies which is not accustomed to them. Furthermore risk management is more difficult due to the inclusion to the items of export license. To prepare such a risk of export of strategic materials, firstly, it should be checked to find whether counter traders are working in the industry which is not related to the spread of weapons of mass destruction, secondly, an appropriate process shall be designed and operated for products to be safely delivered to the trade counter. Therefore, our export enterprises have to introduce CP(Compliance Program), AEO or ISO28000 considering suitability for their actual situations not only to promote export and but also to avoid risk of export control and additional expenses. Through these appropriate processes, an efficient and effective management of the trade risk of strategic materials can be accomplished.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.401-412
• /
• 2013

The paper is to study on the simulation of the micro/macroscale thermo-electrochemical model of a single cell of anode-supported SOFC with direct internal reforming. The coupled heat and mass transport, electrochemical and reforming reactions, and fluid flow were simultaneously simulated based on mass, energy, charge conservation. The micro/macroscale model first calculates the detailed electrochemical and direct internal reforming processes in porous electrodes based on the comprehensive microscale model and then solve the macroscale processes such as heat and mass transport, and fluid flow in SOFCs with assumption of fully-developed flow in gas channel. The simulation results evaluate the overall performance by analyzing distributions of mole fraction, current density, temperature and microstructural design in co/counter flow configurations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.3
• /
• pp.263-272
• /
• 1995

Characteristics of anbient at Korean, Cheju Island have been studied during the intensive field study period on March 11 .sim. 17, 1994 in collaboration with other research organizations from Korea and abroad. The particle size distribution was measured using an Electrical Aerosol Analyzer(EAA) and an Optical particle Counter(OPC). Fine particles(PM1 and PM3) have been collected by filter pack samplers and their ionic compositions have been analyzed. sampling errors inherent to the filter pack sampling method are discussed and the method to analyze those errors are presented. The rine mass concentrations of this study show very similar mass concentrations when Seoul is clear. This is somewhat surprising result, because the most of researchers believe that Kosan is one of the cleanest area in Korea. Bimodal volume size distributions with peak values around 0.1 .sim. 0.2.mu.m and 3.mu.m in particle dimeter were observed for most of the measurement period, particle mass loadings and ionic composition data show a large fraction of particles are from non-sea salt origins. Estimation of water content and acidity of particles based on measurement by a gas/particle equilibrium model, SCAPE, reveals that the pH values of particles are comparable to or lower than those estimated based on measurements in Los Angeles, U.S.A. during the SCAQS study. These findings with the meteorological conditions during the study period suggest that the particles collected during the period have originated from outside Cheju Island.