• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.296-304
• /
• 2012

For development of dyeability, the cotton fabric was dyed repeatedly with persimmon juice by padding mangle. We evaluated the mechanical properties and hand value by Kawabata Evaluation System, and observed the change of surface morphology. The results obtained from this study were as follows. With the increase of repeating padding times of dyeing, the linearity of load-extension curve and tensile energy per unit length of the cotton fabric were increased, but the tensile resilience of fabric was decreased. The value of shear stiffness and shear hysteresis were increased. Also compression resilience and linearity of compression thickness curve were increased. The cotton fabric dyed with persimmon juice had shown the thickness and weight increase as the number of padding increase. As repeating times of dyeing with persimmon juice were increased, among the 6 hand values, the item of stiffness, anti-drape stiffness, fullness and softness were increased, while flexibility with soft feeling and crispness were greatly decreased. The amount of coated persimmon juice on the surface of the fabric was gradually increased as the padding times of dyeing. And cotton fabrics were dyed evenly with persimmon juice by padding mangle.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.17-27
• /
• 2017

This study evaluated the performance of bedding fabrics consisting of warp (150d/144f, polyester) and weft (polyester, Tencel and cotton MVS blended spun yarn) with blend ratio of weft. We measured electrostatic propensity, moisture properties, pilling properties and mechanical properties of the fabrics for this study. F-P fabric showed outstanding moisture properties and pilling properties. However, tensile properties and electrostatic propensity were relatively inferior to other characteristic values. Significant static electricity may make F-P fabric uncomfortable. F-P7C3 fabric showed outstanding moisture properties and pilling properties. Static electricity may make F-P7C3 fabric uncomfortable; in addition, F-P5C5 fabric showed outstanding moisture properties and pilling properties. Rough and stiff hand feel were expected to increase because tensile properties decreased and surface properties increased. F-C fabric showed outstanding pilling properties and electrostatic propensity. However, it showed inferior moisture control properties. F-P5T4C1 fabric showed outstanding moisture properties, pilling properties and electrostatic propensity. Several properties are outstanding; however, the hand feels are very rough and stiff from bending. The water evaporation and static electricity increased with increasing polyester content. As the content of cotton increased, tensile properties were improved. However, water evaporation and static electricity decreased. The addition of Tencel increased the thickness and compression energy so that it exhibited a soft characteristic upon compression and an excellent moisture control properties, but the surface became somewhat coarse.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.381-388
• /
• 2016

Biopolishing using cellulases was introduced in the production of cotton fabric in order to improve the quality of fabric environmental friendly and is commonly used in the textile industry. In this study, the application of a crude cellulase from Acanthophysium sp. KMF001, which was excellent for the saccharification of cellulose, on biopolishing was evaluated. The optimum treatment biopolishing condition was at $50^{\circ}C$ and pH 4.5 for 60 minutes with 10% crude cellulase of fabric weight. After the optimized biopolishing, the crude cellulase of Acanthophysium sp. KMF001 reduced the tensile strength of the tested cotton fabric less than a commercial cellulase. The appearance of the cotton fabric after the treatment of the crude cellulase of Acanthophysium sp. KMF001 was similar to the fabric after a commercial cellulase treatment. All these results support that the crude cellulase of Acanthophysium sp. KMF001 was a good biopolishing cellulase.

• The Korean Fashion and Textile Research Journal
• /
• v.7 no.3
• /
• pp.327-332
• /
• 2005

The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric specimens using loess as colorants. The wet pick up ratio of the chitosan acid solution, as well as the drying condition after the padding of the fabric specimens, was changed in order to study the loess uptake on the fabric. The average particle diameter of the loess was measured. Main components of the loess were $SiO_2$, $Al_2O_3$, and $Fe_2O_3$. By the chitosan treatment, the loess amount on the cotton fabric increased. 80% wet pick up ratio of the chitosan acid solution on the cotton fabric specimen allowed more stable and even adhesion of the loess on the fabric surface, compared to the cases of 100% and 120% wet pick up ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.2
• /
• pp.270-281
• /
• 1996

This study was carried to figure out the effect of bleaching on the cationic surfactant (DSDMAC) absorption by cotton fabrics. And physico-chemical change, static electricity, and fabric stiffness of bleached cotton fabrics were measured. Cotton fabrics bleached with sodium hypochlorite soluton and with sodium percarbonate solution were used to analyze the DADMAC absorption. The results were as follows: 1. As the number of bleaching cycles were increased, the degree of oxidation on cotton fabrics was increased. So their carboxyl content was increased and their tensile strength was decreased. 2. DSDMAC absorption by cotton fabrics was increased by bleaching and was in propor- tion to carboxyl content. Therefore, it was groved that DSDMAC absorption by cotton fabrics was motivated by ion exchange mechanism. 3. The static electricity of cotton fabrics almost no change when bleached and unbleached absorption had no effect on the static electricity of cotton fabrics. 4. DSDMAC which was absorbed by cotton fabrics acted as a lubricant. DSDMAC absorption reduced the friction coefficient of yarn, so stiffness of cotton fabric was decreased.

• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.229-234
• /
• 2005

In this paper, chitosan was suggested for using as a replacement for sodium alginate in the pretreatment print paste for digital ink-jet printing for cotton fabric. Pretreatment print pastes prepared from the mixture of chitosan and acetic acid with the appropriate viscosity gave satisfactory prints on the cotton fabric. Chitosan-treated cotton fabrics were digitally ink-jet printed with four different colors and the color fastness rating of the printed fabrics was satisfactory. Experimental results revealed the possibility of pre-treating the cotton with chitosan to replace the sodium alginate normally present in the pretreatment print paste recipe.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.85-90
• /
• 2002

Five temporarily solubilized reactive disperse dyes were synthesized and characterized. They were applied to polyester/cotton blend fabric using one-bath dyeing method without dispersing agent. The dye that has azonaphthalene chro-mophore seemed to not only be exhausted on polyester but also react with cotton. But other dyes were selectively dyed on polyester and showed limited uptake on cotton. Good levelling as well as moderate to good colour fastness was obtained with the dyes on P/C blend fabric.

• The Korean Fashion and Textile Research Journal
• /
• v.7 no.1
• /
• pp.111-114
• /
• 2005

In this the study, polyester/cotton(P/C) blended fabrics with fine denier were developed to get the light weight compared with the traditional P/C blended fabrics. Moreover, the width of the fabrics was extended by the tenter during the final heat treatment to get the lower fabric density and lighter weight. Then, the physical properties of these fabrics were analysed. The results were as the follows: The developed fabrics had 22.6-31.6% lighter weight than the traditional fabrics with the same fabric width. The weight of fabric decreased drastically with the fabrics width down to 67.1 $g/m^2$. The fabric density for the warp direction decreased with the fabric width. The tenacity and the elongation of the developed fabrics was little lower than that of the traditional fabrics. The air permeability of the developed fabrics increased with that of the traditional fabrics. The stretch rate of the developed fabrics decreased with increasing the fabric width. Residual stretch rate of the developed fabrics was more stable than that of the traditional fabrics. Residual stretch rate of the developed fabrics increased with the fabric width, but the highest value was less than 5% which is quit stable.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.16-25
• /
• 2005

In this research, we investigated hydrolysis of the ester crosslinking on cotton fabric treated with polymer of maleic acid(PMA), citric acid(CA) and combination of polymer of maleic acid and citric acid using Fourier transform infrared spectroscophy. The rate of hydrolysis of the ester crosslinkage increased with pH regardless of the type of polycarboxylic acid used and even after hydrolysis for 256 hour in pH 13_4 solution, the treated fabric retained $10-20\%$ ester crosslinkage. The durability to alkaline hydrolysis of the ester crosslinkage formed by CA was lower than that of by PMA and combination of poly(maleic acid) and citric acid indicating that the ester formed by CA on the cotton fabric is more susceptible to hydrolysis than that formed by PMA and combination of PMA and CA. The total amount of ester and polycarboxylic acid molecules removed from fabric increased with increasing hydrolysis time but the rate of hydrolysis of ester linkage were higher than that of removal of polycarboxylic acid molecule from the fabric. The characteristic of hydrolysis of fabric treated with combination of PMA and CA was related with the mixing ratio of PMA and CA in treating fabric.