• 한국의류학회지
• /
• 제18권3호
• /
• pp.419-428
• /
• 1994

Microemulsion을 형성하기 위해서는 일반적으로 주계면활성제와 함께 보조계면황성제가 첨가 된다. 그러나 보조계면활성제는 이론적으로 반드시 필요한 것은 아니며, 주계면활성제의 친유기 구조를 적절히 변화시킴으로써 보조계면황성제의 필요량을 감소시킬 수 있다. Microemulsion계 를 형성하기 위한 최적의 계면황성제구조를 찾기 위하여 twin tail형 계면활성제인 dialkylbenzene과 dialkylphenol친유기를 갖는 계면황성제를 연구하였다. p-dihexylbenzene sodium sulfonate는 보조계면활성제 없이 microemulsion을 형성하였지만, dialkylphenol sodium sulfates는 젤이나 액정등을 제거하기 위하여 보조계면활성제를 필요로 하였다.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.20-40
• /
• 1996

The oil in water type ME of 4 component system was composed with POE monoalkyl ether and POE sorbitan monoalkyl ester as surfactant, saturated hydrocarbon, side chain structure and aromatic structure as oil, and glycerine as cosurfactant using high pressure homogenizer. The objective of this study was to examine the role of surfactant and oil structure on droplet size and stability. The experimental results showed that the droplet size was smaller with bigger polarity of oil, less hydrocarbon, longer hydrophilic chain of surfactant and higher concentration of glycerine. SQ and LP systems showed very stable but AB and ISB system unstable microemulsion.

• 폴리머
• /
• 제29권1호
• /
• pp.8-13
• /
• 2005

상변환 물질(PCM)을 함유하는 폴리스티렌(PS) 입자는 미니에멀션 중합을 이용하여 제조하였고, 여러 제조 조건에 따라 제조된 고분자 라텍스는 평균 입자크기, 입자 분포 그리고 잠열 저장특성에 관하여 조사하였다. 제조된 PS 입자의 형태와 입자 특성은 각각 SEM과 입도 분석기에 의하여 측정하였다. 분석 결과, 생성된 라텍스 입자의 특성은 각 변수에 의하여 조절할 수 있었으며, 제조된 PS 입자는 나노크기의 안정한 구형의 입자가 생성되는 것을 관찰할 수 있었다. 이는 중합시 첨가된 공유화제는 단량체 입자간의 Oswald ripening과 유착을 억제시키기 때문인 것으로 판단된다. 또한 PCM을 함유하는 PS 입자의 열적 특성은 시차주사열량계(DSC)를 이용하였고, PS 입자의 용융-동결 싸이클에 의하여 열에너지 저장 및 방출 특성을 조사하였다. DSC 결과로부터, PCM을 함유하는 PS 입자의 최대 잠열량은 약 145 J/g으로 나타나는 것을 확인할 수 있었고, 이로부터 PCM을 함유하는 PS 입자는 열에너지 저장매체로서 우수한 잠재성을 갖는 것으로 판단된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.149-152
• /
• 2000

The effects of selected co-surfactants on diesel removal from sandy soil were studied to increase diesel recovery from the soil by the surfactant-enhanced remediation of diesel-contaminated soil. The capability of co-surfactant for enhancing removal efficiency can be related with the interaction between its structural character and the structural peculiarity of nonionic surfactant. In the case of Tween 80, hexanol showed the great improvement in diesel recovery. Efficiency of diesel recovery decreased as hydrocarbon chain length of cosurfactant decreased. Higher content of hexanol further increased diesel recovery, but there was no significant improvement in the case of butanol and pentanol.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.473-479
• /
• 1994

보소계면활성제 없이 microemulsion을 형성하는 최적의 계면활성제 구조를 찾기 위한 일련의 연구 중 세번째로 propoxylated nonylphenol sulfates와 ethoxylated 혹은 propoxylated highly-branched tridecyl alcohol sulfates를 연구하였다. 온도, NaCl농도, 보조계면활성제 농도, ethylene oxide몰수(EON), propylene oxide몰수(PON) 등을 변인으로 하여 phase behavior 실험을 한 결과 tridecyl alcohol 친유기를 갖는 계면활성제가 보조계면활성제 없이 microemulsion을 형성하였다. $C_{13}O(EO)_mPO)_nSO_3Na$ 일반식으로부터 m과 n을 변경시킴으로써 계의 다양한 조건을 만족시키는 계면활성제를 디자인할 수 있었다.

• Archives of Pharmacal Research
• /
• 제28권2호
• /
• pp.243-248
• /
• 2005

To improve the skin permeability of piroxicam, a new oil-in-water microemulsion containing $0.5\%$ piroxicam was developed. Among various oils investigated for their suitability as an oil phase for the microemulsion system, oleic acid showed both excellent solubility and skin permeation enhancing effect for piroxicam. Microemulsion existence ranges were identified through the construction of the pseudo-ternary phase diagram. The effect of the content of oleic acid and the ratio of the surfactant/cosurfactant on skin permeation of piroxicam were evaluated with excised rat skins. The optimum formulation with the highest skin permeation rate ($47.14\;{\mu}g/cm^2/h$) consisted of $0.5\%$ piroxicam, $10\%$ oleic acid, $60\%$ Labrasol/ethanol (1:5) and water.

• Journal of Pharmaceutical Investigation
• /
• 제28권3호
• /
• pp.141-149
• /
• 1998

In order to reduce systemic side effects following administration, flurbiprofen was formulated as O/W microemulsion consisting of the surfactant, oil phase and aqueous phase. Particle size distribution, apparent viscosity, solubility and skin permeation of flurbiprofen in various vehicles and microemulsion were evaluated. The domain of O/W microemulsion s phase diagram had difference between oil types and the area of O/W microemulsion was wide distributed by adding to PG and cosurfactant than that of water alone. As increasing 10, 15 and 20% of Brij 97 content and 1, 2.5, 5% of oil content, the solubility of flurbiprofen in O/W microemulsions and various vehicles was $400{\sim}1,000$ and $10{\sim}500$ times higher than that of control. Also, apparent viscosity of soybean oil microemulsions was higher than that of IPM microemulsions and that of vehicle were increased as increasing vehicle content. Since skin permeation of flurbiprofen decreased as increasing viscosity, in each vehicle, it was not affected 2% ${\beta}-CD$ and decreased as increasing PG content and to 2, 5 and 10% of $HP-{\beta}-CD$. In O/W microemulsion, 5% soybean oil. 20% Brij 97 and 75% water(A-1) with high viscosity showed low skin penetration.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3559-3564
• /
• 2013

Alumina particles were grafted onto the surface of manganese oxide particles via the coprecipitation process using surfactant and cosurfactant. The phase of Mn/Al salts (Phase I) and the phase of precipitation agent (Phase II) were prepared in aqueous surfactant solution, separately. Phase II was added into Phase I and the reaction was performed to form the precursors of composites through hydrogen bonding between $Mn(OH)_2$ and $Al(OH)_3$ prepared by the reaction of Mn/Al salts with the precipitation agent. The alumina-grafted manganese oxide particles were obtained as a final product after calcination. The concentrations of Al salt and surfactant were varied to investigate their effects on the formation and the crystallinity of composites. In addition, the crystal structure of products could be controlled by changing the calcination temperature. Through thermal analyses, it was found that the thermal stability of manganese oxide was improved by the introduction of alumina on its surface.

• Journal of Pharmaceutical Investigation
• /
• 제37권5호
• /
• pp.291-295
• /
• 2007

Prostaglandin $E_1\;(PGE_1)$ was formulated as two self-microemulsifying drug delivery systems (SMEDDS) composed of Cremophor $EL^{(R)}$ or Cremophor $ELP^{(R)}$ as a surfactant, ethanol as a cosurfactant and Labrafac $CC^{(R)}$ as an oil to develop liquid preparation for the treatment of erectile dysfunction. In pseudo-ternary phase diagram, viscous gel area and microemulsion area were defined. In the measurement of viscosity, the viscosity of two formulations increased gradually upon the addition of water and it decreased from the water contents over 40%. With excessive water, the present systems formed a microemulsion spontaneously. From these results, rte could expect that the present liquid $PGE_1$ SMEDDS formulations might stay within the urethra in the viscous state when contacting the moisture of the urethra and can be easily eliminated by urination. In long-term stability study, we could select one formulation more stable at the shelf storage condition of $4^{\circ}C$.

• 약학회지
• /
• 제39권5호
• /
• pp.487-494
• /
• 1995

Solid lipid microspheres (SLMs) were prepared using various lipids and solidifying agents, in order to enhance the gastrointestinal absorption of Cyclosporine A (Cs A) which is a practically water-insoluble drug with low systemic bioavailability. Egg lecithin and HCO-60 (polyoxyethylated 60 mol, hydrogenated castor oil) were used as lipids. Stearic acid and stearyl alcohol were used as solidifying agents. Emulsion concentrates containing Cs A were prepared by mixing the melted lipid and solidifying agent with water, employing bile salts as a cosurfactant. SLMs were obtained by dispersing the warm emulsion concentrate in cold distilled water under mechanical stirring, followed by freeze drying. Physical characteristics of each SLM were investigated by particle size analysis, optical microscopy and scanning electron microscopy. Mean particle size of SLMs was in the range of 30 to 40.mu.m. The SLMs were in good appearance with spherical shape before freeze drying, but were deformed partially after freeze drying. Drug loading efficiencies of SLMs were observed as high as 80 to 90% in average. The systemic bioavailability of Cs A from different SLM formula was investigated in rats following oral administration. Cs A in whole blood was extracted and assayed by HPLC. SLMs revealed the higher bioavailabilities than the standard formula based on the marketed product. SLMs might have several advantages over standard formula for enhanced gastrointestinal absorption, controlled release properties, high loading capacity of the water-insoluble drug, and feasibility of solid dosage forms with better stability in storage.