• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.113-125
• /
• 1984

Water supply has been mainly dependent on the construction of the dams in Korea. It is difficult, however, to continue to construct dams for many reasons, such as the decrease of construction sites, the increase of construction costs, the compensation of residents in flooded areas, and the environmental effects. Water demands have increased and are expected to continue increasing due to the concentration of people in the cities, the rise of the living standard, and rapid industrial growth. It is acutely important to find countermeasures such as development of ground water, desalination, and recycling of waste water to cope with increasing water demands. Recycling waste water includes all means of supplying non-potable water for their respective usages with proper water quality which is not the same quality as potable water. The usages of the recycled water include toilet flushing, air conditioning, car washing, yard watering, road cleaning, park sprinkling, and fire fighting, etc. Raw water for recycling is obtained from drainage water from buildings, toilets, and cooling towers, treated waste water, polluted rivers, ground water, reinfall, etc. The water quantity must be considered as well as its quality in selecting raw water for the recycling. The types of recycling may be classified roughly into closed recycle systems and open recycle systems, which can be further subdivided into individual recycle systems, regional recycle systems and large scale recycle system. The treatment methods of wastewater combine biochemical and physiochemical methods. The former includes activated sludge treatment, bio-disc treatment, and contact aeration treatment, and the latter contains sedimentation, sand filtration, activated carbon adsorption, ozone treatment, chlorination, and membrane filter. The recycling patterns in other countries were investigated and the effects of the recycling were divided into direct and indirect effects. The problems of water reuse in recycle patterns were also studied. The problems include technological, sanitary, and operational problems as well as cost and legislative ones. The duties of installation and administrative organization, structural standards for reuse of water, maintenance and financial disposal were also studied.

• Korean Journal of Community Nutrition
• /
• v.10 no.5
• /
• pp.654-667
• /
• 2005

To survey the different view points about food service programs among parents and teachers, 2 types of questionnaires, which consisted of attitude, perception, satisfaction and demand of the food service program in child education centers, were used. The data was collected from 2450 parents and 450 teachers who attended a child education center in 16 provinces, nationwide. SPSS was used for descriptive analysis and ANOVA test and $X^2-test$. The frinding results were as follows. 1. The average serving size of meal (lunch) were 80 meals per day and 167 meals per day at large institutions. Mean cost of snacks was 14,709 won per month and mean costs of lunch were 29,319 won per month. The mean price was not significantly different according to the scale of institution. The numbers of servings of lunch, morning snack and afternoon snack were 5, 3.4 and 3.5 times per week each. $56.4\%$ of the institutions served meals to children in classrooms, but the national/public institutions, which were attending elementary school, served meals in a dining place in the elementary school. 2. Teacher controlled serving portion size of snacks $(79.6\%)$ and lunch $(88.8\%)\;and\;30.1\%$ of teacher did not allow leaving lunch food. The ratio of knowing about preserved meals of the teacher who worked at a small institution was significantly higher than the teacher who worked at large institutions (p<0.01). 3. Between parents and teachers, several different view points about school lunch programs were detected. Most parents and teachers wanted that the school lunch to be fully cooked and served at the child education institution itself, but $12.2\%$ of parents and $14.4\%$ of teachers wanted a catering service. The teachers group preferred 'lunch box from home' and 'home partially prepared lunch' as an ideal meal serving type than the parent groups (p<0.01). And there were significantly different view points about price factors in school meals, teachers group highly answered that operating expenses must be added in meal prices. 4. The teacher groups' priorities of education activities during meal time were a significantly lower score than parents group in overall education activities. Teacher and parent groups pointed out that individual sanitation activities were most important of the education activities during meal time, but promoting good eating habits was the lowest score in both groups. 5. 'Improving taste and food quality' was most urgent in food service at child education centers, but there were significantly different view points between parent groups $(64.5\%)$ and teacher groups $(43.8\%)\;(p<0.05)$. They answered at a lower percent in 'employee qualified person' and 'cost control' point to improve food service, but there were also different opinions between the two groups (p<0.01). 6. As to the matter of the advantages and disadvantages of catering services, two group answered that the advantages of a catering service were 'convenience' and 'to solve facilities and labor problems', disadvantages were 'lower in food freshness' and 'sanitation problems'. There were also several different view pionts in catering services, the parents groups were more anxious about food sanitation than teachers. This study found several different view points about school food services among parents and teachers. To improve food services at child education institutions, there is a need to adjust the differences between the two groups through interactive communication channels and education and to employ dietitians as taking charge of adjusting roles between the two groups.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.339-344
• /
• 2000

Utilization of animal excreta in aquaculture can have potentials of high fish production and low maintenance costs for fish farming and it can reduce water pollution caused by animal waste disposal. Integration of wastewater treatment pond system with aquaculture has been utilized in many countries. Ecologically balanced pond ecosystem is formed through the stabilization of wastes, the growth of aquatic plants, and the cultivation of fish. The most appropriate fish for rearing in these ponds are those which can feed directly on phytoplankton, especially algae. Carp were introduced into a tertiary pond - water depth of 2.2 m, water surface area of $130\;m^2$, volume of $148\;m^3$ - of a pond system treating milk cow excreta. The carp production was $125g{\cdot}m^{-2}year^{-1}$ which falls into upper range of $18\;-\;137g{\cdot}m^{-2}year^{-1}$ of treated sewage-fed carp farming of other countries. Average $BOD_5$ and T-N of the pond was 19.8 and $21.0\;mg{\cdot}L^{-1}$ respectively, and the ecological environment of it was suitable for growth of carp. Several carp of 100g were introduced in August into a secondary pond of the treatment system, whose average $BOD_5$ and T-N was 27.9 and $30.8\;mg{\cdot}L^{-1}$ respectively. They were died within one week, which may be attributed to the depletion of dissolved oxygen at dawn. Effluents from primary treatment can be used in fish pond with dilution and those from secondary treatment can be directly funnelled into it. Waste stabilization pond treating animal excreta can be utilized for fish rearing when its water quality maintains secondary treatment level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.161-171
• /
• 2020

Direct seeding is one of the rice seedling establishment methods that is increasingly being practiced by farmers to save labor and reduce costs. However, this method often causes poor germination under flooding conditions after sowing. In this study, we developed japonica elite lines with quantitative trait loci (QTL) associated with anaerobic germination (AG) tolerance to overcome poor germination and seedling establishment in wet direct seeding. The QTL introgression lines were developed from a cross between weedy photoblastic rice as the AG donor and the Nampyeong variety via phenotypic and genotypic selection. Compared to Nampyeong, the survival rates of the selected lines were improved by approximately 50% and 240% under field and greenhouse conditions, respectively. To improve selection efficiency by marker assisted selection, the QTL markers associated with AG tolerance were converted to cleaved amplified polymorphic sequence markers designed based on next-generation sequence analysis. These lines retained similar agronomic traits and yield potential to the parent, Nampyeong. Among these lines, we selected the most promising line, which exhibited high survival rate and good agricultural traits under flooding conditions and named the line as Jeonju643. This line will contribute to breeding programs aiming to develop rice cultivars adapted to wet direct seeding. This study demonstrates the successful application of marker-assisted selection to targeted introgression of anaerobic genes into a premium quality japonica rice variety.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.53-62
• /
• 2006

Near infrared reflectance spectroscopy (NIRS) has been increasingly used as a rapid, accurate method of evaluating some chemical compositions in forages. Analysis of forage quality by NIRS usually involves dry ground samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations and spectral math treatments on prediction ability of chemical composition for corn silage by NIRS. A population of 112 corn silage representing a wide range in chemical parameters were used in this investigation. Samples of com silage were scanned at 2nm intervals over the wavelength range 400-2500nm and the optical data recorded as log l/Reflectance(log l/R) and scanned in overt-dried grinding(ODG), liquid nitrogen grinding(LNG) or intact fresh(IF) condition. Samples were analysed for neutral detergent fiber(NDF), acid detergent fiber(ADF), acid detergent lignin(ADL), crude protein(CP) and crude ash content were expressed on a dry-matter(DM) basis. The spectral data were regressed against a range of chemical parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with four spectral math treatments to reduce the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation(SECV). The results of this study show that NIRS predicted the chemical parameters with very high degree of accuracy(the correlation coefficient of cross validation$(R^2cv)$ range from $0.70{\sim}0.95$) in ODG. The optimum equations were selected on the basis of minimizing the standard error of prediction(SEP). The Optimum sample preparation methods and spectral math treatment were for ADF, the ODG method using 2,10,5 math treatment(SEP = 0.99, $R^2v=0.93$), and for CP, the ODG method using 1,4,4 math treatment(SEP = 0.29. $R^2v=0.91$).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.242-253
• /
• 1998

South Korea has been producing asbestos over 60 years. The use of asbestos was over 50 years for production of asbestos slate and 27 years for asbestos friction materials including asbestos textile and brake-lining. Thus, it can be supposed that asbestos related diseases such as asbestosis, lung cancer and mesothelioma could be found in the vulnerable workers exposed to asbestos in 1955-1975, given the average latency period of 10-30 years. Asbestos was produced primarily by Japanese during World War II In Korea. The production of chrysotile peaked to 4,815 tons in 1944. From 1978 to 1984, 10,000 tons of asbestos were produced annually. However, the production was interrupted by raising labor costs and extinction of mine reserves, and finally they had to depend on import for the need of asbestos. In 1945, there were 16 asbestos mines, in total, with the addition of new asbestos mines in South Korea. Imports of asbestos was increased from 74,000 tons to 95,000 tons during the period of 1976 - 1992. But the imports was reduced to 88,000 tons in 1995. Since, in addition to the import of asbestos itself, the imports of asbestos products were increased as well and the accumulation of asbestos reached to 30,000 tons during the period of 1964 to 1993. In 1965, there was only one asbestos company with 207 employees. But the size of asbestos industry has been expanded so much that 118 asbestos companies could be found in 1993 with 1,476 workers. However, there was no record on the survey of asbestos concentration to which workers were exposed in any companies in 1983. The record of the air-borne concentration of the asbestos in textile working places in 1984 showed 6.7 fibers/cc by geometric mean(GM), but it was reduced to 1.2 fibers/cc in 1993. GMs of asbestos in working places for construction materials and asbestos textiles were also decreased from 1.7 fibers/cc to 0.55 fibers/cc during the period of 1984 - 1996.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.3
• /
• pp.334-342
• /
• 2000

Objectives . This study was conducted in order to investigate the degree of recognition, acceptability, and altitude towards day surgery of patients who were hospitalized with diseases that were candidates for day surgery; in order to analyze the average length of stay for treatment of the ailments; and to analyze the percentage of patients who could be discharged on the same day after the surgery ,using the post-anesthesia discharge scoring system. Methods : Data was collected between February 1 and March 31, 1999 from 353 patients who received surgery for cataract, adenoid hypertrophy, inguinal hernia, strabismus, ptosis, cholelithiasis, hemorrhoid, or anal fistula, at a general hospital in Daegu city. The patients were interviewed and surveyed by a post-anesthesia discharge scoring system(PADS) in order to collect data on patient condition such as vital signs, activity and mental status, pain, nausea and vomiting, surgical bleeding, intake and output after the surgery. Results : Among the 353 patients, 52.7% were after of the day surgery and 52.7% were interested in day surgery. Of the respondents, 43.1% said 'my ailment was not serious and the surgery was simple' and 30.4% said 'according to my condition rest at home was desirable' as the reasons for wanting day surgery Alternatively, 56.5% of those declining day surgery said the 'uncertainty of staying home' was the reason. The greatest concern in discharging within 24 hours after surgery was a post-op emergency situation. On the other hand, the shortened hospitalization was the largest advantage of day surgery with 39.1% responding this way, followed by the savings in hospitalization costs (25.8%) and emotional stability (13.7%). The majority of those surveyed (47.6%) believed that discharge should be determined within 1-2 days after the surgery. The average hospital stay was 3.1 days for dischargeable ailments. Pain (45.6%), nausea and vomiting (10.5%), and headache (7.9%) were the common symptoms following surgery. The percentage of patients who were able to be discharged within 24 hours after surgery revealed 95.2% were dischargeable after approximately 3 hours, 99.2% dischargeable after 12 hours, and 100% dischargeable after 24 hours. Conclusions : According to the PADS score, the cataract extract and strabismus correction patients were eligible for day surgery and the further evaluation concerning the reason for delayed recovery of the other diseases is needed.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• The Korean Journal of Financial Management
• /
• v.23 no.2
• /
• pp.109-141
• /
• 2006

The central factor in the pecking order theory of financial structure is the asymmetric distribution of information between managers and less-informed outside investors. Myers and Majluf (1984) show that this asymmetry leads managers to prefer internal funds to external funds. Funds are raised through equity issues only after the capacity to issue debt has been exhausted. In contrast, according to static tradeoff theory, an optimum financial structure exists by the tradeoff between tax saving by debt and bankruptcy costs. This study examines the recent changes of Korean firms' financial structure and financing behavior and the determinants of financial structure. The sample of firms comes from the period of $1996{\sim}2004$, and the number of firms is 32,003. The major findings are as follows. First, in contrast with previous studies using US firms as sample, Korean firms have been using debt financing as their major financing instrument. Especially, the firms in the fund deficit situation relies much more on $long{\sim}term$ and $short{\sim}term$ debts rather than on equity issues. Second, as is the case with previous studies using US firms sample indicates, the financing deficit variable can not explain perfectly the net debt issue. However, compared with net equity issue variable, net debt issue variable is more closely related to the financing deficit variable. Third, when financing deficit variable is added to the current list of explanatory variables of financial structure determinants model, it has a significant and positive explanatory power. In addition, the coefficients of determinants are much improved. Thus, it is concluded that although pecking order theory is not perfect, it appears to be more useful compared to static tradeoff theory, at least in explaining the recent financing behavior of Korean manufacturing firms.