• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.17-28
• /
• 2001

The purpose of this study is to analyze logistics cost of transportation systems on EC(electronic commerce) between company and consumer. Transportation system in logistics is classified by three types on EC. The first type is the direct delivery from supply factory to consumers(type I). The second type is the delivery through distribution center in each area by owner logistics company (type II). The third type is the commission of delivery to the third party logistics company(type III). The logistics of EC has various service characteristics such as dealing with small quantity, various goods, and high frequency. This study assumes that all day's order is delivered on a next day. The logistics cost function is calculated according to the number of orders, delivery distance, transport quantify. and allocated freight trucks for daily order of the subject zone. The logistics cost changes according to the daily order characteristics. Therefore it is simulated to analyze the logistics cost change that considers the type of transportation's order characteristics. As a result of analysis, if the number of order is less than 10 and the quantify of each order is less than 10kg, type III has an advantage over the others And if the number of order is more than 10 and the quantity of each order is more than 10kg, type I has an advantage in the same zone and type II has an advantage in the other zones. This study is limited on the actual application because this study doesn't consider logistics infra of supply company and transport service time. If further study that considers these factors is implemented, it can estimate more accurate logistics cost on EC and propose an efficient freight transport alternatives to the company. This study attributes to estimate the logistics cost change over the frequency of daily order, the quantify of supply goods, and the transport distance on EC.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.1
• /
• pp.59-70
• /
• 2016

The purpose of this study is to review that the VE techniques can be used as a selection tool of borrow pit locations. The analysis of the soil investigation report is performed for the selection of proposed borrow pit site on a large-scale residential development area. Possible earthwork volume of mining is estimated and the weighting matrix evaluation is applied to the VE techniques. After determining the evaluation items for VE assessment, important degree was calculated. The Rating and evaluation of performance is carried out on a proposed borrow pit site. And, development priority has to be decided for a proposed borrow pit sites. As a result, the relative construction cost is closely related to the haulage distance. As the haulage distance increases, the relative construction cost will be increased. Therefore, it was confirmed quantitatively that haulage distance has a significant impact on the select of borrow pits. Also, it was found that the condition of borrow pits itself is important, but it cannot be ignored the impact of the life cycle cost for the selection of optimal borrow pit sites.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.421-426
• /
• 2003

Micro-suing that used on micro mechanism should be equal to distance between pitch and correct of shape. Therefore, micro spring must make by super-precision working. But, current step of super-precision processing depends on special quality of work piece and is ineffective the aspect of cost and productivity yet. Also, to use as demandable length shearing process perform but even if make precision spring, in the aspect of quality of coil spring make difficult that produce product of good quality. Therefore, purpose of this study presented proposed process that extract the point of processing factor after perform finite element analysis applying existing sheet shearing process to suing shearing process consider cost and productivity after evaluate.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.6
• /
• pp.29-41
• /
• 2012

This study was conducted in Ningxia Hui autonomous region, located at southern part of Mu Us sand land in China. To investigate relationships between windbreak effect and installation cost of sand barriers, plastic net is utilized by using four kind of heights (0.2, 0.3, 0.4 and 0.5m) and four kind of porosities (20, 30, 50 and 70%). These heights and porosities are measured for estimating distances for effective windbreak. It is shown that porosity and the distance have a positive relationship at same heights and porosity on ground indicates a constant figure when height reaches a certain level, regardless of the porosity. This implies that there is a difference of level of windbreak with different porosities; however, distance of windbreak effect is same at the same height of sand barrier. As a result of comparison between porosity of sand barrier on the ground and installation cost in each sand barrier with various heights and porosities (16 combinations), 0.4m and 0.5m height sand barriers describe highest economical efficiency. Within two variables, we concluded that height has a higher impact on windbreak effect than porosity.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2006

The purpose of this study was to identify critical parameters of a putting performance using jerk cost function. Jerk is the time rate of change of acceleration and it has been suggested that a skilled performance is characterized by decreased jerk magnitude. Four elite golfers($handicap{\leq}2$) and 4 novice golfers participated in this study for the comparison. The 3D kinematic data were collected for each subject performing 5 trials of putts for each of these distances (random order): 1m, 3m, 5m The putting stroke was divided into 3 phases such as back swing. down swing and follow-through. In this study, it was assumed that there exist smoothness difference between elite and novice golfers during putting. The distance and jerk-cost function of Putting stroke for each phase were analyzed Results showed that there was a significant difference in jerk cost function at putter toe (at media-lateral direction) and at the center of mass between two groups by increasing putting distance. From these it could be concluded that jerk can be used as a kinematic parameter for distinguishing elite and novice golfers.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.1
• /
• pp.155-162
• /
• 2002

In this research, I finally came to a conclusion analyzing the connection among managing of each items in management expenses, the size of each complex and stories, and the term of using. (1) In the managing cost regarding to the management manner, although the managing cost of self-governing management is less imposed than the one of commission management, there is slight difference between those Costs. And it is more important to consider the effectiveness of management than to emphasize reduction of management cost. (2) The higher the stories, the higher the managing cost of elevator per the unit area. It Is caused by the fact that the father the distance of the elevator operating, the higher the electric charges. (3) The third of one of total management cost goes to pay the personnel expenses. So I found that the effective management of the expenses is available to reduce management cost. (4) The higher the stones, the lower the cost of personnel expenses including the cleaner cost. (5) The sum of costs assigned in repairment and management increases in proportion to the term of using. The costs assigned in special repairment and management are interacting to each other. (6) To reduce the management cost, we have to cut down the personnel in security guard that occupies one third of total management cost with application to the joint security system and operation of the self-governing guard. Through this process, it will be easy to accomplish the rationalization of contract with an outside order. Because the improvement of management service is not only the responsibility of owner but also the one of dwellers. And it Is imperative to realize the importance of cooperation and trust between the owner and dwellers. And the establishment of effective managing system which has convenience and rationality must be settled without delay.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.65-71
• /
• 2020

Recently, interest in the DC transmission is rapidly increasing worldwide. In many countries and leading companies are prior to the aggressive development of HVDC technology and application. Especially, VSC-HVDC system has been widely applied to transfer power at long distance between power plant and power consumption area. Therefore in this paper, we analyzed the benefit-cost of VSC-HVDC system which has more advantages than existing transmission system. The proposed system is MMC(Modular Multilevel Converter) VSC-HVDC system that have stability of Power Grid, interconnect Large-scale New Power Generation Plants by prevents Blackout. And MMC VSC-HVDC system Reduced the loss importing foreign systems. And the benefits were calculated in four stages, and the costs were applied to the actual project. By evaluating the various avoidance costs compared to the benefit-cost, it was confirmed that MMC VSC-HVDC system was advantageous in system stability and economic and social benefits.

• Journal of agriculture & life science
• /
• v.45 no.3
• /
• pp.97-104
• /
• 2011

Analyses of export of agricultural products, so far, have not been an easy task because of the lack of direct data from exporting companies. Results obtained from indirect data are subject to criticism and have a restriction on general interpretation. This paper uses and analyzes the direct data from a chrysanthemum-exporting-company, leading to some conclusion that farms receive on average 72.3% of unit price but the share decreases by the distance to the company. Exporting farms have higher income ratio, compared to farms that sell flowers to domestic market. The analysis of unit price and cost shows that the profitability of exporting-company might be worsened if government subsidy is not in place.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.465-475
• /
• 2016

Since inaccurate demand estimation for recent urban rail construction may result in financial burden to cities, precise prediction for operating cost as well as construction costs is necessary to avoid or reduce budget loss of the local or central government. The operating cost is directly related to the public fare and affect a policy to determine the rate system. Therefore, there is a pressing need to develop an estimating model for reliable operating cost of urban railway. This study introduces a new model to estimate the operating cost with new variables. It provides a better prediction in accuracy and reliability compared to the existing model, considering the feature of urban railway. For verification of our model, railway operation data from a few cities for the last five years were comprehensively examined to determine variables that affect the operating cost. The operating cost was estimated in a dummy regression model using five independent variables, which were average distance between stations, daily trains distance, total passenger capacity of a train in a train, driving mode(manned/unmanned), and investment type(financial/private).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.36-40
• /
• 2002

Routing algorithm uses metric to choose the route of Least cost to destination network, the best suited routing investigates all routes to the shortest destination among networks and is decided on the route given the minimum metric. This paper analyzed packet flow for setting up the best fitted path on the same network using RIP and EIGRP as the distance vector algorithm and measured the Link-efficiency.