• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.102-110
• /
• 2000

In this paper, Wiener-Hopf design of the two-degree-of-freedom(2DOF) controller configuration is treated for the standard plant model. It is shown that the 2DOF structure makes it possible to treat the design of feedback properties and reference tracking problem separately. Wiener-Hopf factorization technique is used to obtain the optimal controller which minimizes a given quadratic cost index. The class of all stabilizing controllers that yield finite cost index is also characterized. An illustrative example is given for the step reference tracking problem which can not be treated by the conventional H2 controller formula.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권7호
• /
• pp.335-342
• /
• 2005

This paper presents a circuit to generate the current reference signal for single-phase harmonic elemination systems. Some of conventional methods for the current reference signal generation based on neural network algorithms. It requires complex circuitry to implement. the simplest method is to use analog filters. but it is difficult to obtain good current reference signals. So, we propose the harmonic detection circuit using GIC(Generalized Impedance Converter) for the purpose of low cost ,simple circuitry and high performance, Simulation and experimental results verify that the proposed circuit has better harmonic detection performance than conventional circuit.

• 전자공학회논문지C
• /
• 제34C권4호
• /
• pp.1-15
• /
• 1997

This paper proposes CMOS on-chip voltage and current reference circuits that operate at supply voltages between 2.5V and 5.5V without using a vonventional bandgap voltage structure. The proposed reference circuits based on enhancement-type MOS transistors show low cost, compatibility with other on-chip MOS circuits, low-power consumption, and small-chip size. The prototype was implemented in a 0.6 um n-well single-poly double-metal CMOS process and occupies an active die area of $710 um \times 190 um$. The proposed voltage reference realizes a mean value of 0.97 V with a standard deviation of $\pm0.39 mV$, and a temperature coefficient of $8.2 ppm/^{\circ}C$ over an extended temeprature range from TEX>$-25^{\circ}C$ to $75^{\circ}C$. A measured PSRR (power supply rejection ratio) is about -67 dB at 50kHz.

• 한국컴퓨터산업학회논문지
• /
• 제6권5호
• /
• pp.801-812
• /
• 2005

H.264/AVC는 부호화 효율을 크게 향상시킨 비디오 부호화에 대한 표준이다. ITU-T와 MPEG는 가변블록의 움직임, 다중참조화면, l/4 화소 움직임 추정/보상기법과 비트율-왜곡 최적화 기법 등 다양하고 복잡한 부호화 기법들을 적용했다. H.264 참조 모델은 비트율-왜곡 최적화 기법에 기반을 둔 복잡한 부호화 모드 결정 기법을 채택했는데, 이는 부호화기의 높은 복잡성을 요구한다. 본 논문에서는 매크로 블록 부호화 모드의 순서에 대한 비트율-왜곡의 비용 값의 분포에 기초한 효율적인 부호화 모드 결정 기법을 제안하였다. 실험결과는 제안한 방법이 부호화 시간에 있어 34%를 감소시켰으며, 비트율-왜곡의 계산 량을 82% 줄였음을 보여준다.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.76-87
• /
• 2017

Finite-set predictive current control (FS-PCC) is advantageous for power converters due to its high dynamic performance and has received increasing interest in multilevel inverters. Among multilevel inverter topologies, the cascaded H-bridge (CHB) inverter is popular and mature in the industry. However, a main drawback of FS-PCC is its large computational burden, especially for the application of CHB inverters. In this paper, an FS-PCC method based on a deadbeat solution for three-phase zero-common-mode-voltage CHB inverters is proposed. In the proposed method, an inverse model of the load is utilized to calculate the reference voltage based on the reference current. In addition, a cost function is directly expressed in the terms of the voltage errors. An optimal control actuation is selected by minimizing the cost function. In the proposed method, only three instead of all of the control actuations are used for the calculations in one sampling period. This leads to a significant reduction in computations. The proposed method is tested on a three-phase 5-level CHB inverter. Simulation and experimental results show a very similar and comparable control performance from the proposed method compared with the traditional FS-PCC method which evaluates the cost function for all of the control actuations.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2189-2196
• /
• 2016

This paper proposes a new finite control set-model predictive control (FCS-MPC) method for induction motors. In the method, the reference state that satisfies the given torque and rotor flux requirements is derived. Cost indices for the FCS-MPC are defined using the state tracking error, and a linear matrix inequality is formulated to obtain a proper weighting matrix for the state tracking error. The on-line procedure of the proposed FCS-MPC comprises of two steps: select the output voltage vector of the two level inverter minimizing the cost index and compute the optimal modulation factor of the minimizing output voltage vector in order to reduce the state tracking error and torque ripple. The steady state tracking error is removed by using an integrator to adjust the reference state. The simulation and experimental results demonstrated that the proposed FCS-MPC shows good torque, rotor flux control performances at different rotating speeds.

• Journal of Information Processing Systems
• /
• 제16권3호
• /
• pp.530-540
• /
• 2020

In order to solve the problem of low tracking accuracy caused by complex noise in the fault diagnosis of complex nonlinear system, a fault diagnosis method of high precision cost reference particle filter (CRPF) is proposed. By optimizing the low confidence particles to replace the resampling process, this paper improved the problem of sample impoverishment caused by the sample updating based on risk and cost of CRPF algorithm. This paper attempts to improve the accuracy of state estimation from the essential level of obtaining samples. Then, we study the correlation between the current observation value and the prior state. By adjusting the density variance of state transitions adaptively, the adaptive ability of the algorithm to the complex noises can be enhanced, which is expected to improve the accuracy of fault state tracking. Through the simulation analysis of a fuel unit fault diagnosis, the results show that the accuracy of the algorithm has been improved obviously under the background of complex noise.

• 통상정보연구
• /
• 제1권2호
• /
• pp.69-95
• /
• 1999

Internet EC accomplish to simply electronic business from all process integration of production, marketing and customer service. Also customers gain to goods information by one-line product reference, order, product information exchange and negotiate to low cost for high quality goods. Therefore, Purpose of this study is to introduce the building method of efficient EC, helping understand EC, and analysing its present state in the Korean enterprises and efficiency on international trade information.

• 대한원격탐사학회지
• /
• 제23권5호
• /
• pp.483-491
• /
• 2007

One of the major obstacles to classify and validate Land Cover maps is the high cost of acquiring reference data. In case of inaccessible areas such as North Korea, the high resolution satellite imagery may be used for reference data. The objective of this paper is to investigate the possibility of utilizing QuickBird high resolution imagery of North Korea that can be obtained from Google Earth data via internet for reference data of land cover classification. Monthly MODIS NDVI data of nine months from the summer of 2004 were classified into L=54 cluster using ISODATA algorithm, and these L clusters were assigned to 7 classes - coniferous forest, deciduous forest, mixed forest, paddy field, dry field, water, and built-up areas - by careful use of reference data obtained through visual interpretation of the high resolution imagery. The overall accuracy and Kappa index were 85.98% and 0.82, respectively, which represents about 10% point increase of classification accuracy than our previous study based on GCP point data around North Korea. Thus we can conclude that Google Earth may be used to substitute the traditional reference data collection on the site where the accessibility is severely limited.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.127-132
• /
• 2006

Quantization in video coding plays an important role in controlling the bit-rate of compressed video bit-streams. It has been used as an important control means to adjust the amount of bit-streams to at]owed bandwidth of delivery networks and storage. Due to the dependent nature of video coding, dependent quantization has been proposed and applied for MPEG-2 video coding to better maintain the quality of reconstructed frame for given constraints of target bit-rate. Since Scalable Video Coding (SVC) being currently standardized exhibits highly dependent coding nature not only between frames but also lower and higher scalability layers where the dependent quantization can be effectively applied, in this paper, we propose a dependent quantization scheme for SVC and compare its performance in visual qualities and bit-rates with the current JSVM reference software for SVC. The proposed technique exploits the frame dependences within each GOP of SVC scalability layers to formulate dependent quantization. We utilize Lagrange optimization, which is widely accepted in R-D (rate-distortion) based optimization, and construct trellis graph to find the optimal cost path in the trellis by minimizing the R-D cost. The optimal cost path in the trellis graph is the optimal set of quantization parameters (QP) for frames within a GOP. In order to reduce the complexity, we employ pruning procedure using monotonicity property in the trellis optimization and cut the frame dependency into one GOP to decrease dependency depth. The optimal Lagrange multiplier that is used for SVC is equal to H.264/AVC which is also used in the mode prediction of the JSVM reference software. The experimental result shows that the dependent quantization outperforms the current JSVM reference software encoder which actually takes a linear increasing QP in temporal scalability layers. The superiority of the dependent quantization is achieved up to 1.25 dB increment in PSNR values and 20% bits saving for the enhancement layer of SVC.