• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.653-660
• /
• 2015

Technologies for reducing construction duration are key factors in nuclear power plant construction projects, as a reduction in construction duration at the construction phase leads to a reduction in construction cost and an increase in profits through the early operation of the nuclear power plant. To analyze the constructability of the height of single-layer placement of formwork for the Reactor Containment Building (RCB) exterior wall through lateral pressure according to the height of concrete placement, the deformation criteria for formwork, and a new form design, 'MIDAS GEN (hereinafter referred to as MIDAS)' is used in this study. The cost and workload of formwork are derived according to the unit of height of the RCB exterior wall. Based on the result, it was found that the higher the RCB exterior wall, the higher the material cost, and the less the construction duration and the less the total number of formwork layers. Based on this result, it is believed that the material cost and the construction duration can be appropriately determined according to the formwork height.

• Journal of Korean Academy of Nursing Administration
• /
• v.16 no.4
• /
• pp.381-388
• /
• 2010

Purpose: The purpose of the study was to compare recipients' health behavior, attitude to using medicaid, medication compliance, and the changes in hospital cost and visit-day of in-patient and out-patient care between tele-care regions (TCR) and general care regions (GCR) in Korean medicaid. Method: The design of the study was ex-post facto comparing recipients in TCR and GCR. The sample included 625 persons in TCR and 410 persons in GCR. To collect materials, the case manager interviewed recipients of medicaid and filled out questionnaires which were analyzed through SAS/PC 9.1. Results: In studying health behavior and medication, compliance was not significant. However, the attitude to using medicaid was significantly more positive in TCR than in GCR. In out-patients, the change of hospital visit-day was not significant between TCR and GCR, but TCR showed a reduction in hospital cost compared to GCR. For in-patient recipients, GCR showed a greater reduction in changes in hospital cost and visit-day compared to TCR. Conclusions: The results of the study show that attitudes to using medicaid via telephone are positive and results are more effective than hospital visit consultation, and the cost of out-patient care could be reduced.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.33-51
• /
• 1997

On ATM-based wired/wireless integrated network, we apply the connection re-routing method[1] which reduced the inter-cluster handoff delay by reserving VPI/VCLs for possible inter-cluster handoff calls in advance. Additionally, we propose wired resource reservation methods, which are ausiliary method and split method, for handoff QoS guarantee of various expected services. The characteristics of these methods reserve wired connection resources based on the information on the possible inter-cluster handoff calls. With mathematical analysis, we also propose each algorithm and cost function for deciding an optimal amount in reserving resources. With numberical examples, we can see that the auxiliary method effectively reduces the cost in all cases(.alpha.>.betha., .alpha.=.betha., and .alpha.<.betha.). The split method has a little cost-reduction effects, when handoffs call does not have priority over new calls (that is, .alpha..leq..betha.) and the total capacity is relatively large. In other cases, the split method, however, has effective cost-reduction effects. The numerical resutls show that these reservation methods ca flexibly cope with the time-variant environment and meet the QoS requriements on the inter-cluster handoff calls.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.66-67
• /
• 2016

Modular construction is attracting attention as the solution of recent problems in construction site. Such as lack of construction workforce, increasing labor costs, work delay due to extreme weather events and strengthening government regulations. However, despite the many advantages, Modular construction has not been activated dueto high construction costs compared to other construction methods. Accordingly, the object of this study is priority derivation of prefabricated house cost reduction factors and use as basic research data. For research performance, we have analyzed the blueprint and bill of quantities of a modular construction based public dormitory which was built in 2013. In result, the proportion of modular construction and on-site construction is 66% and 34%, and the construction cost proportion by activity was devided in to construction(79%), machinery(7%), electricity(5%) and civil(9%). Among these results in order to reduce costs, interior finishing(19.4) steel-frame(16.9%), metal works(13.5%), RC(11.8%), joinery(7.3%) is the order requires focused management.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.70-77
• /
• 2008

The purpose of this study evaluates a feasibility and economical efficiency of new renewable energy. According as weather change is serious problem now days, every people make attention to the reduction of greenhouse gas. The revitalization of new renewable energy creates the variety of energy source, stability of energy supply and reduction of greenhouse gas. In this study evaluates a feasibility and economical efficiency from new renewable energy of various photo voltaics, wind power, small hydro and biogas. Feasibility does in standard of technical characteristic, politic support, marketability, establishment present condition and development aim. Economical efficiency does in standard of developmental unit cost, utilization factor, equipment life, politic support cost, interest ratio. The results of this study were as follows photo voltaics, wind, small hydropower, biogas in order feasibility is high. Developmental unit cost, utilization factor, equipment life, politic support cost and analyzed the relationship of interest ratio fluctuation and economical efficiency. From all new renewable energy the utilization factor most is important in economical efficiency but necessary utilization factor is difficult because environmental problem.

• Membrane and Water Treatment
• /
• v.6 no.6
• /
• pp.451-476
• /
• 2015

Membrane distillation (MD), which can utilize low-grade thermal energy, has been extensively studied for desalination. By incorporating solar thermal energy, the solar membrane distillation desalination system (SMDDS) is a potential technology for resolving the energy and water resource problems. Small-scale SMDDS (s-SMDDS) is an attractive and viable option for the production of fresh water for small communities in remote arid areas. The minimum-cost design and operation of s-SMDDS are determined by a systematic method, which involves a pseudo steady state approach for equipment sizing and the dynamic optimization using overall system mathematical models. The s-SMDDS employing three MD configurations, including the air gap (AGMD), direct contact (DCMD) and vacuum (VMD) types, are optimized. The membrane area of each system is $11.5m^2$. The AGMD system operated for 500 kg/day water production rate gives the lowest unit cost of $5.92/m^3$. The performance ratio and recovery ratio are 0.85 and 4.07%, respectively. For the commercial membrane employed in this study, the increase of membrane mass transfer coefficient up to two times is beneficial for cost reduction and the reduction of membrane heat transfer coefficient only affects the cost of the DCMD system.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.87-95
• /
• 2021

This study aims to demonstrate the impact of BPR in reducing cost in international business organizations by analyzing the impact of decentralization, re-engineering organizational structures, re-engineering human resources, industrial process technology, improving total quality standards, and value engineering. The study population includes all the international business organizations operating in the Middle East, with the condition that they operate in at least four countries. The results showed that there is a significant effect of all dimensions of BPR in reducing costs in international business organizations operating in the Middle East. When studying the impact of the dimensions combined, the moral effect appeared at each processes (decentralization, re-engineering of human resources and industrial process technology), while the moral effect did not appear in (rebuilding organizational structures, improving total quality standards, and value engineering). This does not negate the importance of the impact of these dimensions, but rather shows a disparity between dimensions in reducing cost, when studying its combined effect. The study recommends that organizations should adopt modern management accounting methods, including value engineering, in order to identify and enhance activities that add value to the organization's operations, as well as identify and eliminate non-value adding activities, in order to reduce costs.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.3
• /
• pp.36-42
• /
• 2008

The superconducting motor shows several advantages such as smaller size and higher efficiency against conventional motor especially utilized in ship propulsion application. However, this size reduction merit appears in large capacity more than several MW. We are going to develop a 5MW class synchronous motor with rotating High-Temperature Superconducting (HTS) coil. that is aimed to be utilized for ship propulsion so it has very low-speed, The ship propulsion motor must generate very high electromagnetic torque instead of low-speed. Therefore. the rotor (field) coils need very large magnetic flux that results in large amount of expensive HTS conductor for the field coil. In this paper a 5MW HTS motor for ship propulsion is considered to be designed with construction cost reduced via HTS field coil cost reduction because HTS conductor cost is critical factor in the construction cost of HTS motor. In order to reduce the HTS conductor amount. iron-cored rotor types are considered. so several cases with iron-core are compared one another and with an air-core case.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.570-582
• /
• 2017

In recent years, national and local government's air quality management and climate change adaptation policy has been significantly strengthened. The measures in the two policies may be in a relationship of trade-off or synergy to each other. Greenhouse gases and air pollutants are mostly emitted from the same sources of using considerable amounts of fossil fuels. Co-benefits, in which either measure has a positive effect on the other, may be maximized by reducing the social costs and by consolidating the objectives of the various policies. In this study, the co-benefits were examined by empirically analyzing the effects of air pollutants and greenhouse gas emission reduction, social cost, and cost effectiveness between the two policies. Of the total 80 projects, the next 12 projects generated co-benefits. They are 1) extend restriction area of solid fuel use, 2) expand subsidy of low-$NO_x$ burner, 3) supply hybrid-vehicles, 4) supply electric-vehicles, 5) supply hydrogen fuel cell vehicles, 6) engine retrofit, 7) scrappage of old car, 8) low emission zone, 9) transportation demand management, 10) supply land-based electric of ship, 11) switching anthracite to clean fuel in private sector, 12) expand regional combined-energy supply. The benefits of air pollutants and greenhouse gas-related measures were an annual average of KRW 2,705.4 billion. The social benefits of the transportation demand management were the highest at an annual average of KRW 890.7 billion, and followed by scrappage of old cars and expand regional combined-energy supply. When the social benefits and the annual investment budgets are compared, the cost effectiveness ratio is estimated to be about 3.8. Overall, the reduction of air pollutants caused by the air quality management policy of Gyeonggi-do resulted in an annual average of KRW 4,790.2 billion. In the point sources management sector, the added value of $CO_2$ reduction increased by 4.8% to KRW 1,062.8 billion, while the mobile sources management sector increased by 3.6% to KRW 3,414.1 billion. If social benefits from $CO_2$ reduction are added, the annual average will increase by 7.2% to KRW 5,135.4 billion. The urban and energy management sectors have shown that social benefits increase more than twice as much as the benefits of $CO_2$ reduction. This result implies that more intensive promotion of these measures are needed. This study has significance in that it presents the results of the empirical analysis of the co-benefits generated between the similar policies in the air quality management and the climate change policy which are currently being promoted in Gyeonggi-do. This study suggested that the method of analyzing the policy effect among the main policies in the climate atmospheric policy is established and the effectiveness and priority of the major policies can be evaluated through the policy correlation analysis based on the co-benefits. It is expected that it could be a basis for evaluation the efficiency of the climate change adaptation and air quality management policies implemented by the national and local governments in the future.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.243-252
• /
• 2015

This paper considers a supply chain consisting of a manufacturer under the cap-and-trade emissions regulation and a permit supplier. We study joint production quantity and investment in reducing permit production cost decisions for centralized and decentralized supply chains. We formulate two supply chain contracts with aims to coordinate the decentralized supply chain; wholesale price contract and cost-sharing contract. Under the cost-sharing contract, the manufacturer shares a part of the investment in reducing permit production cost and then is allowed to purchase emission permit at a lower price. We analytically find that the proposed cost-sharing contract with reasonable parameters can coordinate the supply chain whereas the wholesale price contract is not desirable to achieve the system-wide profit. Numerical example is followed to support the analysis.