• 대한교통학회지
• /
• 제24권7호
• /
• pp.139-148
• /
• 2006

도로교통혼잡비용에 대하여 단일시장모형, 내지는 승용차만이 존재하는 경우를 가정한 기존 모형과 이론이 갖는 한계점을 보완할 수 있는 대안으로서 대체적 관계인 승용차와 버스의 두개 교통수단이 존재하는 상호의존적 교통시장 하에서 최적 도로교통혼잡비용 산정에 대하여 연구하였다. 연구를 위하여 사회적 후생 극대화 문제의 이론적 배경인 소비자잉여 극대화문제 등 관련 교통경제학적 이론 및 문제점을 검토하고, 이 경우 목적함수인 사회적 후생함수가 교통수간의 대체효과를 감안하여 비분리 (non-separable)적이고 그 자코비안이 비대칭 (asymmetric)인 경우 적분경로의 문제등 제반 문제점 및 제약조건에 대한 이론적 검토가 수행되었다 이를 기초로 도로교통흔잡비용의 이론적 배경 및 수리 문제화에 대한 검토와 실현 가능한 상호의존적 교통시장 하에서 최적 도로교통혼잡비용을 산정하는 방법 및 그 의미에 대하여 검토 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제15권3호
• /
• pp.59-65
• /
• 2015

최근 네트워크 산업계에서 기존 전송 망 보다 유연한 망을 구축하기 위한 캐리어이더넷 기술이 부각되고 있으며 MPLS-TP (MultiProtocol Label Switching-Transport Profile) 기술이 해당 영역의 주요 표준 기술로 적용되고 있다. 하지만 MPLS-TP 망내의 장비를 관리하기 위한 관리 망에 대해서는 명확하지 않은 상태이다. 본 논문에서는 MPLS-TP 망 내의 장비 설치 시 부가적 설정 없이 자동으로 관리 망을 구축하는 방안을 제안한다. 제안하는 방법으로 관리시스템과 망 연결을 위한 설정을 최소화 하여 망 내의 장치 설치비용과 유지 관리 비용을 감축할 수 있다. 또한 실제 MPLS-TP 장비에 적용하여 제안하는 방법의 실효성에 대해 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2075-2089
• /
• 2008

세계적으로 물류운송이 대형화 및 고속화를 넘어 글로벌화 되어가고 있는 가운데 물류운송의 선진화를 위해서 운송시스템의 개선이 시급하다. 물류의 흐름에서 많은 병목현상을 유발하고 있는 부분은 타교통수단간의 연계운송이며, 연계 운송시 늘어나는 운송시간과 증가되는 물류비용을 줄일 수 있는 논스톱 형태의 복합운송의 필요성이 대두되고 있다. DMT(Dual Mode Trailer)는 철도와 도로를 이용 가능하도록 고안되어 문전수송이 가능하도록 하는 일괄수송시스템을 의미하며, 우리나라에서는 도로와 철도를 연결하여 운송되는 시스템을 통칭 DMT 수송시스템으로 불리고 있다. 신개념 운송시스템인 외국의 DMT 수송시스템을 살펴보고 한국형 DMT 수송시스템 개발을 위한 추진현황 및 향후과제에 대해 제시하고자 한다.

• Journal of Information Processing Systems
• /
• 제14권2호
• /
• pp.487-498
• /
• 2018

The purpose of the high-speed railway construction is to better satisfy passenger travel demands. Accordingly, the design of the train working plan must also take a full account of the interests of passengers. Aiming at problems, such as the complex transport organization and different speed trains coexisting, combined with the existing research on the train working plan optimization model, the multiobjective bi-level programming model of the high-speed railway passenger train working plan was established. This model considers the interests of passengers as the center and also takes into account the interests of railway transport enterprises. Specifically, passenger travel cost and travel time minimizations are both considered as the objectives of upper-level programming, whereas railway enterprise profit maximization is regarded as the objective of the lower-level programming. The model solution algorithm based on genetic algorithm was proposed. Through an example analysis, the feasibility and rationality of the model and algorithm were proved.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.83-89
• /
• 2001

This paper provides a short description of the COMPASS-model which is a concept for the simulation of multiway systems. The focus of the COMPASS-model is to offer an opportunity to investigate the effects of redistribution strategies on logistic and monetary values in a system of returnable transport items (RTI). The modeling concept consists of five modules: topology, system load, distribution, redistribution, cost. It includes the integration of highly sophisticated evolutionary algorithms for the optimal solving of complex capacitated vehicle routing problems (CVRP) which are typical for RTI-systems. The results of first experiments with a COMPASS-based prototype are repeated. They reveal some basic regularities in RTI-systems.

• 한국항공운항학회지
• /
• 제28권4호
• /
• pp.164-170
• /
• 2020

Recently, the aviation industry faced a major crisis due to the impact of COVID-19. However, despite the sluggish passenger transportation, the cargo transportation sector is relatively maintained or increasing depending on the item. In this study, we will look at the trends before and after COVID-19, focusing on the cargo export field, which is a concern of the aviation industry. First, it analyzes the entire air cargo and then analyzes the trends of each item and country in detail. In particular, it examines the process of changes in air transport costs, which increased significantly immediately after COVID-19, and conducts future trends and prospects in the cargo export field. As a result of the study, some characteristics of air cargo exports before and after COVID-19 were found in an analysis by item and country, and transportation costs varied according to route distance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.707-716
• /
• 2011

It has been applied using cranes or insertion methods to install heavy structures to strengthen existing railway bridges. These methods are uneconomical because of two reasons. The first one is it is required to construct approach roads for heavy equipment and/or working yard. The second one is the electric lines shall be cutoff during construction. Both require additional construction cost and duration. In this study, new transport equipment was developed which can be applied to heavy structures up to 100 ton. Using this method, the heavy structure can be loaded into the new transport equipment at working yard and transported to the working site. This method can be applied, but not limited to railway bridge or roadbed rehabilitation. It was found that the precious construction can be achieved to install heavy structure using this method. The experimental construction to make non-ballast girder bridge composite with new pc deck slab using this method was carried out for Jewon bridge. The example bridge is in extreme condition because it locates above national road #38 within extreme transition curve and has 10 ‰ slope and skew. The experimental construction results were satisfactory both for safety and construction precision.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1883-1895
• /
• 2007

With a land area of 910,768 sq. km, population estimate of 150 million people and GDP-growth rate of 6.9% per annum (2006 est), the centrality of effective public transportation in Nigeria is readily seen. In this regard, rail transportation offers much potential because of its relative safety, reliability, lower cost to the users and being singularly capable of transforming the national economy through mass movement of people, goods and services. Within this context, the demand for an effective railway system, and the enormous potentials for profitable investment in rail infrastructure in Nigeria, is indisputable. Beginning with the history, the paper discusses the main problems of Nigeria's railway transport system; and then makes policy suggestions, after considering the potentials of rebuilding the rail infrastructure. The necessity of this work is premised on the fact that there is a significant gap in critical knowledge about Nigeria's railway transport system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.200-201
• /
• 2022

Off-Site Construction is being widely adopted as an alternative to solve endemic problems in construction industry such as low productivity and efficiency. However, it is strongly recommended to examine the transportation process to be optimized because it determines the size of a modular and influences the cost of the construction. Therefore, in this study simulation model for optimization of modular construction transportation plan was developed using AnyLogic. As a result of the study, the influence of trailer transport capacity and transport time increases as the number of modular which should be transported from factory to site increases.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2192-2201
• /
• 2016

Wind energy is currently the fastest-growing electricity source worldwide. The cost efficiency of wind generators must be high because these generators have to compete with other energy sources. In this paper, a system that utilizes an open-winding permanent-magnet synchronous generator is studied for wind-energy generation. The proposed system controls generated power through an auxiliary voltage source inverter. The VA rating of the auxiliary inverter is only a fraction of the system-rated power. An adjusted control system, which consists of two main parts, is implemented to control the generator power and the grid-side converter. This paper introduces a study on the effect of unbalanced voltages for the wind-generation system. The proposed system is designed and simulated using MATLAB/Simulink software. Theoretical and experimental results verify the validity of the proposed system to achieve the power management requirements for balanced and unbalanced voltage conditions of the grid.