• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.1-13
• /
• 2011

Joint roughness is one of the most important parameters in analysis of rock slope stability. Especially in probabilistic analysis, the random properties of joint roughness influence the probability of slope failure. Therefore, a large dataset on joint roughness is required for the probabilistic analysis but the traditional direct measurement of roughness in the field has some limitations. Terrestrial LiDAR has advantagess over traditional direct measurement in terms of cost and time. JRC (Joint Roughness Coefficient) was calculated from statistical parameters which are known from quantitative methods of converting the roughness of the material surface into JRC. The mean, standard deviation and distribution function of JRC were obtained, and we found that LiDAR is useful in obtaining large dataset for random variables.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.95-102
• /
• 2009

A steam generator (boiler) in thermal power plants, consisting of more than 30,000 parts and components, can lead to the plant shutdown with damage to even the small part of the components; esp., like weld failures on boiler tubes. Consequently it is greatly demanded to improve the quality of the weld on the boiler tube for the stable operation of the power plants. Because of the feature of the welding, which is done past by melting the work pieces and adding a filler material that cools to become a strong coalescence, there is a great possibility that weld failures take place. As a result, it is regulated to make a non-destructive testing, like radiography test, to detect defects and flaws in the weld. The current film radiography test provides a lower image quality exceeding 2.0% of a basic quality level for a penetrameter, it is very likely to fail to detect micro defect. As a result, the prevention for the boiler tube failure has not been made effectively. In this study, computed radiography technology has been applied as a digital radiography test to the boiler tube weld, and Se-75 radiation source was used to improve the image quality, instead of Ir-192 source. As a result of this study, it is proven to save the time and cost for test and to enhance the quality level of penetrameter penetrating image, which enables to upgrade the quality of radiography test to the boiler tube weld.

• Journal of Nutrition and Health
• /
• v.47 no.5
• /
• pp.374-384
• /
• 2014

Purpose: Health professionals and policy makers confront the failure of provider-administered, conventional behavioral interventions in the fight against obesity epidemic. The aim of this study was to develop a tailored, cost-effective delivery system for a child obesity prevention and management program through technology convergence using Web-enabled smart cellular phones. Methods: Assessment of service needs and development of a delivery system for the program were based on a comprehensive literature review and expert reviews, and results from in-depth interviews and a need-assessment survey. Results: The user- and site-centered service delivery system using Web-enabled cellular telephones as the hardware platform for obesity prevention and management has been developed. A tailored informational service and intervention will be provided interactively between stakeholders through the platform. The potential legal issues associated with the service design have also been considered. Conclusion: The user-centered convergence design and platform based on principles of Transtheoretical Model and Stages of Change using the Health Promoting School framework could enable effective intervention and promote acceptance in the long-run.

• The Korean Journal of Financial Management
• /
• v.26 no.4
• /
• pp.83-102
• /
• 2009

Banks traditionally focus on the financial services against the uncertain future liquidity needs, i.e. saving as well as lending. As the business model of banks has been shifted from the originate to hold model to the originate to distribute model since the enactment of Gramm-Leach-Bliley Financial Services Modernization Act in 1999, the financial services encompass information gathering and generating, underwriting and risk sharing through packaging claims for the investors, in addition to the payment and settlement services. Ensued are the financial market integration and diversification of financial services, with which the accessibility to financial services is arguably significantly enhanced. Such integration and diversification necessarily entails the risk of contagion due to the non-fulfilling service over the several other financial services, which would be contained easily under the separate financial services. This paper addresses the pricing of fees for the integrated financial services through which the contagion could spread when the users of financial service are not immune to the failure to fulfill their obligation due to the economic turmoil. Consequently the information asymmetry about the clients is unavoidable. Higher fees could drive out the otherwise good clients out of the pool of customers for the financial services. Then, the risk could be exacerbated due to the proliferation of bad clients who are vulnerable to the financial distress and liquidity crunch. So the banks should take into account the interactional effect of the fees between/among the non interest based activities and interest based activities under the information asymmetry. Contrary to our general perception, the current analysis demonstrates that the bank should focus on the reduction of cost associated with good clients rather than that of bad clients.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.1
• /
• pp.56-64
• /
• 2003

If a quantitative trait loci (QTL) marker identified in a population is applicable to different populations (marker universality), this will not only reduce the labor and cost in marker assisted selection (MAS), but accelerate the application of molecular markers to real breeding programs. Present study aims to evaluate the defined QTL related markers from a population to a different breeding population for the MAS. Four rice breeding populations were subjected to seventy-five simple sequence repeat (SSR) markers which were already identified for their polymorphism information content (PIC) in the parents of the crossings. Among them, eight markers were evaluated for their correlation between presence of marker alleles and phenotypic expression in breeding populations. A reasonable level of polymorphism for the mapped markers originated from any sources of rice accessions was observed between crosses of any sources (marker repeatability). However, correlation between presence of markers and expression of the traits in rice breeding populations was not significant except for minor portion of traits and markers examined (failure of marker universality). In the present study, various strategies were discussed to develop new markers with universality of breeding application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.172-180
• /
• 2017

Korean army has been trying to construct a future tactical network in collaboration with TICN at the ground level and the next-generation military satellite system in the space level. However, due to the low bandwidth and high operational cost, the satellite system has the limitation to exchange all kind of tactical information through it. To overcome the limitation, there have been several researches to construct airborne networks. In this paper, we propose an effective interworking architecture and operation scheme between terrestrial tactical networks and aerial relay networks to counteract against the communication breaks of terrestrial terminals. And, we also propose a way to analyze its effectiveness. The experimental results show that the interworking of aerial relay networks can manage the failure situations in terrestrial tactical networks very effectively.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2567-2572
• /
• 2011

It is the key component that motor block system affect safety and performance of railway. It is very important to examine the performance of motor block for improvement of safety and reliability of rolling stock. As such, the motor block is an essential part of rolling stock. But provisioning quantities and spare quantities depend on the operator' experience. There are many problems that occur lots of spare or lack of spare. If there are lots of spare, it is difficult to keep the circumstance by cost issues. On the contrary, if there are lack of spare, it may have a adverse effect on the whole railway. Thus, this study offers method to estimate optimal spare of motor block using the analysis of data related with Failure rate, MTBF, standards and guidelines. And we expect this study to contribute to determine optimal spare parts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.416-421
• /
• 2005

Most of solar system dissemination has been focused on domestic hot water system of which utilization to a building is relatively simple and safe than solar heating system. Through the survey on a cause of solar house dissemination failure in Korea, we conclude that design integration and systematic approach method for technology application are the most important element for a successful solar house. KIER(Korea Institute of Energy Research) and Hanbat National University have started new project on a development of Zero energy Solar House, called ZeSH which can be sustained just by natural energy without the support of existing fossil fuel. This is the 1st phase research of 10 years long-term ZeSH plan which develops a low-cost and $100\%$ self sufficient ZeSH. The goal of 1st phase ZeSH research is to get a $70\%$ self sufficiency only in thermal loads. Actual demonstration house, named KIER ZeSH I was designed and constructed as a result of 1st phase research work in the end of 2002. Various innovative technologies such as super insulation, high performance window, passive and active solar systems, ventilation heat recovery system are applied and evaluated to the KIER ZeSH I. A lot of computer simulations had been conducted for the optimal design and system integration in every design steps. Considering all the results from detailed hourly computer simulation, it is expected that at least $70\%$ self-sufficiency in thermal loads which is 1st phase target value can be excessively achieved in actual demonstration house. Besides, many valuable findings from the design and analysis to construction could be established such as collaboration method among the participants, practical design and construction techniques for system integration and the others. The purpose of this paper is to introduce the main findings through the development of KIER ZeSH I project. Practical guidelines in every design step for new low- or zero- energy solar house is proposed as result.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.29-33
• /
• 2008

According to statistics released by the Ministry of Labor for the past 6 years, work-related accidents in the construction industry have been on the continued increase, resulting in social and economic losses that are difficult to determine at an exact amount. However, the number will likely get much bigger if unreported cases are included, considering the fact that the aforementioned statistics are based soley on the applications filed with Korea Workers' Compensation and Welfare Service. The practice of businesses choosing not to report and dealing with industrial accidents in an unauthorized manner is defined as "concealment of industrial accident". The reason the employers tend to engage in the concealment practice even at their huge cost is a "pre-qualification" scheme for the applicants in the government procurement process. Under the pre-qualification scheme, the applicants with a high rate of industrial accidents receive a low grade and become less attractive candidates in the procurement process, thus losing an opportunity to win a contract. Such failure relates directly to the fate of business organizations, to survive or not. That is why they are making all-out efforts to obtain a high grade in the pre-qualification evaluation. With regard to the accident-concealment problem, the following can be mentioned as preventive measures: (1) To exclude a rate of industrial accidents from the pre-qualification scheme; (2) To strengthen the institution of imposing penalties on the occurrence of industrial accidents; (3) To introduce private insurance system to the current industrial accident compensation insurance; and (4) To give non-recognition treatment to industrial accidents that were not reported upon occurrence. In conclusion, the concealment problem can be resolved if the aforementioned measures are to be taken continuously along with corrective measures against institutional deficiencies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.139-147
• /
• 2014

The ballast water may be discharged into another sea area with marine organisms, it caused problems to disturb the marine ecosystem. So, in order to remove these environmental risk factors, the IMO has mandated the installation of BWTS to the all ships. Our monitoring system diagnose and predict a failure of BWTS by analyzing the sensor information of BWTS collected from which the ships scattered in the ocean of several. This paper presents the design and implementation of communication modules for BWTS remote monitoring considering the satellite communication charge fee. In the our study, we implemented the safety and cost-saving communication modules by LabVIEW program. The collected sensor informations is encrypted and compressed by LabVIEW modules running on RIO. Then they will be transfer to the land server and will be decrypt to enable monitoring in the land server. For the verification, we build the test modules which can verify from collecting the sensor data to consuming them in the monitoring server. We carried out 20 times for the data pattern in all of case. So, we verified the excellent functionality and reliability through the experimental result.