• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.53-59
• /
• 2011

In recent years, mobile communication service is used extensively as a larger service area for the maintenance of quality of service required by the expansion of service areas and As the ever-increasing role in relays, and the location is relatively easy to install and less constrained costs, operating cost savings in terms of ICS(Interference Cancellation System) repeaters are required. However, an adaptive algorithm that is applied when updating the filter due to the increase in volume of operations increase the complexity of hardware implementation is fraught with many difficulties. In this paper, if there is a path that feedback. ICS repeater utilizing baseband signal processing for the removal of interfering signals from the feedback operation, significantly reducing the amount of reducing hardware complexity Complex Singed Signed LMS adaption algorithm is proposed. Proposed algorithm for evaluating the performance of Static channel WCDMA signal environment for the ICS, the results of the simulation algorithm, convergence speed and better performance in therms of convergence errors that are required through the implementation of the operation greatly reduces the amount of hardware complexity able to reduce the effect was visible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.1-6
• /
• 2018

Hydro-forming technology has spread dramatically throughout automotive industry over the last 20 years. This technology has many advantages for automotive applications in terms of better structural integrity of the parts, lower cost from fewer parts, material savings, weight reduction, lower springback, improved strength, durability, and design flexibility. In this study, various simulation technologies were developed to investigate the formability of hydro-forming components. Through this technology, to establish the effective forming process for appropriate components design, the bending process, pre-forming process, die closing process, etc. were considered for good forming. This paper proposes the forming amount, section length (corresponding to the hydro-forming press capacity), and minimum curvature (curvature effect evaluation according to the hydro-forming pressure) among the considerations in the design of the hydro-forming part. In addition, a design method is proposed for hydro-forming molding by carrying out cross section analysis of a real sub-frame part for automobiles. The effects of pre-bending, axial feed, hydraulic pressure, press load, and friction among the hydro-forming process parameters were analyzed. Therefore, whether these processes are necessary factors for hydro-forming were examined.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.113-125
• /
• 2013

Outsourcing is used as one of the effective methods while many companies have to start to innovate everything because of increased fierce global competition, low-growth economy, and varied customers' requirements. Under these conditions, a lot of firms are introducing outsourcing for cost savings, risk reduction, management efficiency, strengthen core competence. The purpose of this study is to analyze the effect of between outsourcing success by outsourcing strategy and factors for selecting outsourcing partners and BSC success in the Korea manufacturing. This study was intended to make it possible to get a practical approach on evaluation and compensation of the outsourcing manufacturing enterprises by identifying outsourcing success factors and BSC performance factors. When an outsourcing partner of enterprise is selected, detailed assessment will be possible in terms of partner's competence, financial factors, institutional factors, and operational factors.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.257-268
• /
• 2017

Objectives: This study was conducted to review the Toxic UseReduction Act of Massachusetts, USA, which has been evaluated as a successfulcase of a chemical reduction policy, and to search for ways to introduce it inKorea. Methods: We analyzed the implementation of the TURA by attending TUR Planning Course of the Toxic Use Reduction Institute in Massachusetts and researching the related literature. Results: As TURA took effect, the use of chemicals in Massachusetts was reduced, and cost savings were achieved in workplaces. The success factors for the legislation are considered to be support form the federal and state governments and the active participation of business and civic group. Domestic efforts to reduce toxic substances have already begun, so if the process of TURA is appropriately applied to domestic legislation of chemicals control, it would be expected to produce visible results. Therefore, we reviewed the 'Act on Chemicals Registration and Assessment', 'Act on Chemical Control' and 'Act on the Integrated Control of Pollutant-Discharging Facilities' and sought solution for applying TURA to each piece of legislation. For the first case, 'Toxic or Hazardous Substance List' and 'Establishment of Toxic Use Fee' is applicable. For the second case, 'Annual Toxic or Hazardous Substance Reports' is applicable. For the third case, 'Toxic Reduction Plans' and 'Toxics Use Reduction Institute and 'Toxic Use Reduction Planners' is applicable. Conclusions: The government should take notice appropriateness for the reduction of toxic chemicals and provide financial support. Businesses should invest in technologies that build trust with local communities, improve productivity, and reduce costs. Finally, civic group should cooperate with government and businesses.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.603-623
• /
• 2015

The scale and nature of the recent earthquakes in the world and the related earthquake disaster index coerce the concerned community to become anxious about it. Therefore, it is crucial that seismic lateral load effect will be appropriately considered in structural design. Application of seismic isolation system stands as a consistent alternative against this hazard. The objective of the study is to evaluate the structural and economic feasibility of reinforced concrete (RC) buildings with base isolation located in medium risk seismic region. Linear and nonlinear dynamic analyses as well as linear static analysis under site-specific bi-directional seismic excitation have been carried out for both fixed based (FB) and base isolated (BI) buildings in the present study. The superstructure and base of buildings are modeled in a 3D finite element model by consistent mass approach having six degrees of freedom at each node. The floor slabs are simulated as rigid diaphragms. Lead rubber bearing (LRB) and High damping rubber bearing (HDRB) are used as isolation device. Change of structural behaviors and savings in construction costing are evaluated. The study shows that for low to medium rise buildings, isolators can reduce muscular amount of base shears, base moments and floor accelerations for building at soft to medium stiff soil. Allowable higher horizontal displacement induces structural flexibility. Though incorporating isolator increases the outlay, overall structural cost may be reduced. The application of base isolation system confirms a potential to be used as a viable solution in economic building design.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.652-657
• /
• 2017

The use of continuous welded rail is increasing because of its many advantages, including vibration reduction, enhanced driving stability, and maintenance cost savings. In this work, two different types of continuous welded rails were examined to determine the influence of repeated wheel-rail contact on the crystal structure, microstructure and mechanical properties of the rails. The crystal structure was determined by x-ray diffraction, and the microstructure was examined using optical microscopy and scanning electron microscopy. Tensile and microhardness tests were conducted to examine the mechanical behaviors of prepared specimens taken from different positions in the cross section of both newly manufactured rail and worn rail. Analysis revealed that both the new and worn rail had a mixed microstructure consisting of ferrite and pearlite. The specimens from the top position of each rail exhibited decreased lamella spacing of the pearlite and increased yield strength, ultimate tensile strength and hardness, as compared with those from other positions of the rail. It is thought that the enhanced mechanical property on the top position of the worn rail might be explained by a mixed effect resulting from a directional microstructure, the decreased lamella spacing of pearlite, and work hardening by the repeated wheel-rail contact stress.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.77-85
• /
• 2010

As the ticket issuing methods have been diversified for the convenience of the passengers such as ticketless service(SMS ticket, e-ticket, home ticket), automatic ticket issuing machine and consignment ticket sale, maintaining the current number of ticket booth has been becoming a issue. This study is designed to simulation for the optimum number of ticket booth and which can affect an efficient operation of train station and improvement of customer convenience. This study will contribute to minimize customer waiting time at the ticket booth. In addition, presenting the optimum number of booth is expected to have an effect on the increase of productivity and cost savings.

• Journal of Arbitration Studies
• /
• v.32 no.1
• /
• pp.25-42
• /
• 2022

The modern arbitration practice recognises the need for a faster and simplified procedural framework for international disputes with fairly low amounts at stake. This has driven several institutions to expand their offer of procedural guidelines with a simplified set of rules that would fit this purpose. Expedited arbitration is increasingly used by parties and is growing in popularity. The basic idea behind establishing expedited arbitration rules is to create the possibility for the parties to a dispute to agree on a simplified and streamlined procedure and to have an arbitration award issued within a short period. The associated cost savings for the parties is another benefit. The importance of developing rules for expedited dispute resolution has recently also been considered by the UNCITRAL Working Group II, in light of the "increasing demand to resolve simple, low-value cases by arbitration" and "the lack of international mechanisms cope with such disputes." As a result, the UNCITRAL 2021 Expedited Arbitration Rules (UNCITRAL EAR) took effect on September 19, 2021. The EAR was adopted by the Commission on 21 July 2021 and, next to UNCITRAL's well-known instruments like the Arbitration Rules (UAR) and the Model Law, represent another chapter in the Commission's impactful work in the field of international arbitration. Overall, the UNCITRAL EAR has great potential to meet the need for more flexible and efficient arbitration proceedings, primarily because they provide the tribunal with strong managerial powers while still leaving room for consultation with the parties. However, parties must remember that not all disputes may be suitable for expedited arbitration, and disputes that are complex or have the possibility of being joint or consolidated may not benefit from simplified procedures and tight deadlines. This article will outline the core features and characteristics of the UNCITRAL EAR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.340-347
• /
• 2016

Since the 1970s, manufacturing has been one of the key driving forces that has led to Korea's economic growth. However, this growth rate has been reduced significantly since the 2000s, and shows that revenues and employment are steadily decreasing. In addition, while manufacturing investment in Korea has dropped sharply, the United States, Germany, Japan, and other major countries have increased investment in manufacturing. These countries have promoted manufacturing innovation strategies that include the convergence of information and communications technologies (ICT) and manufacturing. For manufacturing innovation, it is important for time and cost savings required for product development to be achieved by changes in the production process, especially product design. Modeling and simulation (M&S) is a process that replaces physical product design, mockup making, and testing, with virtual product creation (modeling) and engineering analysis (simulation). In this paper, we analyze the economic ripple effect of supercomputing M&S using an input-output model technique based on the input-output tables published by the Bank of Korea. When we set the M&S budget (about US$16 million for the last 10 years) of the Korea Institute of Science and Technology Information (KISTI) as input coefficients, the effect on production inducement, value-added inducement, and employment inducement was analyzed to be US$24 million, US$13.4 million, and 267, respectively.