• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.45
• /
• pp.139-163
• /
• 2010

Companies make a great effort for saving costs because a rise in logistics costs weaken trade companies competitive position in the international market. Therefore it is important for companies and government to enhance logistics competitive. This article focus on the logistics laws and policies to improvement companies competitiveness and save logistics costs. It has researched from the point of view rather government basis than company basis. Korean Logistics policies have some fundamental problems that the law and policies are spreaded to several administrations such as, Ministry of Knowledge Economy, Ministry of Land, Transport and Maritime Affairs etc. We propose the solutions as follows; First of all, we review the laws and policies on logistics and point out the problems. Second, setting up the principle of Korean Logistics Policies according to the changes in international logistics paradigm and circumstances. Third, adjustment of systems and tasks of administrations related to logistics. Fourth, innovation plan for logistics policies. The plan can carry out two ways demonstration business and diffusion business in order.

• Journal of Environmental Science International
• /
• v.14 no.7
• /
• pp.683-689
• /
• 2005

The consecutive combination process of a biological process as the pre-treatment and a chemical process as the post-treatment is applied for the dyeing wastewater. The poor efficiency of biological treatment using pure oxygen makes the chemical treatment cost high. It is necessary to improve the efficiency of biological treatment in order to reduce the cost of chemical treatment. The purpose of this paper is to find the minimum dose of chemical reagent to fit the Discharged Water Quality Standards for the different biological treatment effluents. Results revealed that the minimum dosage of Fenton's reagent lead to save the cost of chemical treatment based on the guideline dose in the treatment plant. The possible maximum saving reagents was up to $70\%$ for the effluent of the pilot plant packed with the carrier imbedded microorganisms which were selected from the present treatment plant.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.1
• /
• pp.15-24
• /
• 2009

The energy usage and the economical feasibility of the typical two story office building in the three urban locations of South Korea are evaluated as the eight orientations. The smallest energy consume is shown at the true south. The ranges of the low energy consume are $-3l5^{\circ}{\sim}0^{\circ}\;and\;-135^{\circ}{\sim}-180^{\circ}$. There are obvious advantages of passive solar designs such as using a fully glazed facade at the true south in the building. The General Low voltage plan is the effective way for the office building when does not required the high voltage electricity. The energy cost of KEPCO is compared to that of XCEL ENERGY. The portion of the customer charge of XCEL ENERGY is about 10% but it is about 50% of the total tariff of KEPCO. The effective way to save the energy cost is by reducing the operating energy of XCEL ENERGY plane but the most effective way is reduce the contracting energy of KEPCO plane.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.287-291
• /
• 2008

DWDM(dense wavelength division multiplexing)-PON technology is applied to subscriber network as the same as E-PON or G-PON. And its network components consist of OLT, ONU and RN. Legacy DWDM technologies have been applied on the long-haul part of optical network due to its excessive high cost. But many researchers have successfully devised a few methods which can considerably reduce the cost of equipment. Nowadays DWDM-PON equipment's has arrived to a level having a competitive price in comparison to E-PON or G-PON on condition of giving equal bandwidth. Recently a major domestic ISP has deployed DWDM-PON equipments in one apartment complex area in the purpose of satisfying ever-increasing bandwidth demand. The ISP increased data transmission capacity from 1 G to 16G without any additional fiber deployment. In this paper we introduce roughly three technologies of implementing DWDM-PON's optic module and related optic devices. And we also describe pre-test of vendor's DWDM-PON equipment and discuss the result. Lastly we propose some of network configurations which adopt DWDM-PON technology. By adopting DWDM-PON technology ISP can greatly save the cost of deploying broadband subscriber network.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.351-359
• /
• 2016

The Korean Prototype Gen-IV sodium-cooled fast reactor (PGSFR) is supposed to be loaded with a relatively-costly low-enriched U fuel, while its envisaged transuranic fuels are not available for transmutation. In this work, the U-enrichment reduction by improving the neutron economy is pursued to save the fuel cost. To improve the neutron economy of the core, a new reflector material, PbO, has been introduced to replace the conventional HT9 reflector in the current PGSFR core. Two types of PbO reflectors are considered: one is the conventional pin-type and the other one is an inverted configuration. The inverted PbO reflector design is intended to maximize the PbO volume fraction in the reflector assembly. In addition, the core radial configuration is also modified to maximize the performance of the PbO reflector. For the baseline PGSFR core with several reflector options, the U enrichment requirement has been analyzed and the fuel depletion analysis is performed to derive the equilibrium cycle parameters. The linear reactivity model is used to determine the equilibrium cycle performances of the core. Impacts of the new PbO reflectors are characterized in terms of the cycle length, neutron leakage, radial power distribution, and operational fuel cost.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.1
• /
• pp.8-16
• /
• 2013

We consider a problem of presort and loading of commercial bulk mails in a mailing service. Here, presort is the process by which a mailer prepares mail so that it is sorted to at least the finest extent required by the mailing service provider for the (discounted) price claimed. The problem is formulated as a special type of transportation problem. To solve industrial-sized problems, we develop an efficient heuristic algorithm and perform experimental tests on randomly generated problem instances. Results of the tests show that mailers can save mailing cost much more when they use small-sized mail trays with less frequent mailings. Also, large-sized mailers can obtain much more cost saving than small-sized mailers. In addition, cost saving effect is influenced by delivery area distribution of mails and fluctuation of mailing demand.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.493-498
• /
• 2009

Recently, the number of complex construction projects, such as high-density development and long-span mega structure construction, has been increasing globally. Therefore, the construction duration has become an even more important factor for success. Nevertheless, in domestic residential construction projects, it usually takes more time than twice as much as North American cases. The long construction duration causes a number of problems, for example growth of financial costs, fall in productivity, and weakness of competitiveness. If the framework construction duration can be shortened to 3 ~ 4 days, then it is also expected to complete the finish work of building in shorter duration, be led to reduce the entire construction duration, and eventually to save a great deal of indirect costs. For shortening the construction duration, previous researches pointed out that the development of simplified plan design should precedes. But, in reality, lack of experience of new design and innovative techniques tends to be the obstacle to wide adoption of the simplified plan design in construction fields. In this paper, a simplified structural plan design is proposed, and the construction cost is quantitatively compared between when traditional construction technique is applied to the traditional plan and when the duration-shortening key technique is applied to the developed plan.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.51-58
• /
• 2010

Wireless Mesh Network has drawn much attention due to wide area service coverage with low system cost. However, there is a bottleneck problem in wireless mesh network since the traffic is aggregated into a gateway. Placement of multi-radio can easy the bottleneck problem, but without careful design it results in unnecessary system cost increasement. In this paper, we propose a system cost minimization through differential antenna placement where optimum antenna placement is determined by the required wireless link capacity. With CPLEX program, optimum number of antennae is determined as a function of local user traffic and gateway capacity. From numerical analysis, it is confirmed that our proposed model can solve bottleneck problem, and at the same time save the system cost.

• Journal of Korea Multimedia Society
• /
• v.8 no.7
• /
• pp.953-960
• /
• 2005

The Network can be easily damaged in the mobile computing environment. Mobile Support Station (MSS) which supports the Mobile Host(MH) could also be unstable too. Therefore, when a critical error occurs the repairing cost can be high. For stable repair, the hand-off strategy should be considered to save the continuing message and checkpoint information, and to reduce the cost of network repair. In this paper, we propose the Switching Trickle(ST) strategy which reduces the repairing cost for the MH's mobility. ST strategy changes the way which stores the information in connection with the number of write events(r) that occur from the hands-off strategy. Accumulated cost by increased mobility has been simulated too. From the results of simulation, the proposed strategy has shown more cost effective than the conventional strategy. The proposed strategy also has shown very supportive in saving checkpoint and message log information stably.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1390-1396
• /
• 2013

The paper estimated the reasonable market price of lead-acid battery energy storage system (BESS) intended for demand management of electricity customers. As time-of-use (TOU) tariffs have extended to a larger number of customers and gaps in the peak and off-peak rates have gradually risen, deployment of BESS has been highly needed. However, immature engineering techniques, lack of field experiences and high initial investment cost have been barriers to opening up ESS markets. This paper assessed electricity cost that BESS operation could save for customers and, based on the possible cost savings, estimated reasonable prices at which BESSs could become a more prospective option for demand management of customers. Battery scheduling was optimized to maximize the electricity cost savings that BESS would possibly achieve under TOU tariffs conditions. Basic economic factors such as payback period and return on investment were calculated to determine reasonable market prices. Actual load data of 12 industrial customers were used for case studies.