• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1007-1012
• /
• 2008

Demand for the highly efficient and high performance urban energy supply system having been continuously increased according to the rise of quality of life and continuously increased energy cost all over the world. The district heating and cooling system is very effective way for energy saving, cost reduction, and demand side management of energy. There are several district cooling supply technologies such as chilled water direct transportation, installation of absorption type chiller in the user side, and desiccant cooling. This study investigates the advantage and technical problems of each district cooling technology. Also, it is necessary political and financial support system for the extension of district cooling system.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.131-135
• /
• 2008

Computational integral imaging(CII) has the advantage of generating the volumetric information of the 3D scene without optical devices. However, the reconstruction process of CII requires increasingly larger sizes of reconstructed images and then the computational cost increases as the distance between the lenslet array and the reconstructed output plane increases. In this paper, to overcome this problem, we propose a novel CII method using a depth conversion technique. The proposed method can move a far 3D object near the lenslet array and reduce the computational cost dramatically. To show the usefulness of the proposed method, we carry out the preliminary experiment and its results are presented.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.12-13
• /
• 1994

Magnetic recording is still considered to be a.leader in storage industries in general. The rigid disk drive, in particular, has an advantage over tape, optical, magneto-optical, or flash memories, because of high areal density and fast access time with reasonably low cost per Mbyte. However, to be competitive in the market and to keep an edge over other storage devices, head and media in rigid disk drives require better performance per cost and more aggressive improvement in areal density, as shown in Fig. 1, than before. In this review paper, the future trend in head/media technologies of the rigid disk drive has been reviewed. Thin film media and thin film inductive/MR heads will be mainly discussed, since they are expected to be dominant in the future high-end drives over other technologies, such as particulate media or MIG heads.(omitted)mitted)

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.43-53
• /
• 2004

The distributed OCSP (Online Certificate Status Protocol), composed of multiple responders, is a model that enhances the utilization of each responder and reduces the response time. In a multi-user distributed environment, load balancing mechanism must be developed for the improvement of the performance of the whole system. Conservative load balancing algorithms often ignore the communication cost of gathering the information of responders. As the number of request is increased, however, fail to consider the communication cost may cause serious problems since the communication time is too large to disregard. We propose an adaptive load balancing algorithm and evaluate the effectiveness by performing modeling and simulation. The principal advantage of new algorithm is in their simplicity: there is no need to maintain and process system state information. We evaluated the quality of load balancing achieved by the new algorithm by comparing the queue size of responders and analyzing the utilization of these responders. The simulation results show how efficiently load balancing is done with the new algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.218-222
• /
• 2011

This paper proposes a single-joint optical torque sensor with one body structure. Conventional optical torque sensors consist of three parts, two plates and an elastic structure. They have slightly slipping problem between plates and elastic structure due to the manufacturing tolerance. Since the order of measurement range of optical sensor is about ten micrometers, the slipping problem causes large measurement error, especially in the case of vibrational or high speed plant. This problem does not occur in the proposed design due to the one body structure. The proposed sensor has advantage of low cost, light weight, and small size. And it is easy to design and manufacture. Simulation works that analysis of stress and strain are performed accurately. To demonstrate the performance of proposed sensor, experiments were implemented to compare with a commercial force/torque sensor (ATI Mini45).

• ETRI Journal
• /
• v.26 no.5
• /
• pp.497-500
• /
• 2004

In this paper, we present a novel idea to integrate a low cost inertial measurement unit (IMU) and Global Positioning System (GPS) for land vehicle localization. By taking advantage of positioning data calculated from an image based on photogrammetry and stereo-vision techniques, errors caused by a GPS outage for land vehicle localization were significantly reduced in the proposed bimodal approach. More specifically, positioning data from the photogrammetric approach are fed back into the Kalman filter to reduce and compensate for IMU errors and improve the performance. Experimental results are presented to show the robustness of the proposed method, which can be used to reduce positioning errors caused by a low cost IMU when a GPS signal is not available in urban areas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.245-251
• /
• 2005

Ship's auto pilot is must necessary the azimuth data, which is supported by a gyro, geomagnetism and GPS compass. The gyro compass is operation of stability & correct , therefore it is used by big size shipping because of high cost. The other side, medium and small size shipping are used the geomagnetism and GPS compass of low cost. This paper have studied that the two jobs are going on at the same time both of there's advantage. Which is asked the algorithm for stability azimuth data on reject methode the defect of respect with geomagnetism & GPS compass.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.47-62
• /
• 1992

This paper describes a procedure for optimizing the route selection and production conditions in alternate process plans under a cellular manufacturing environment. The type of production is mainly production-to-order which deals with unexpected products as the changes factor. The flexible cellular manufacturing can be viewed as a complete unification of both flexible manufacturing process and flexible production management. The integrated problem for designing flexible cellular manufacturing associated with determining the optimal values of the machining speeds, overtime, and intercell flow is formulated as Nonlinear Mixed Integer Programming(NMIP) in order to minimize total production change cost. This is achieved by introducing the marginal cost analysis into the NMIP, which will compute the optimal machining speed, overtime, intercell flow, and routing. The application of this procedure offers greater flexibility to take advantage of the cellular manufacturing due to the optimum use of resources. A solution procedure for this problem was developed and a numerical example is included.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.790-792
• /
• 2003

The remote sensing image server provides advanced image serving capabilities for geospatial image. Wide seamless image mosaics of Landsat 5 over GMS countries, which exceed a 15 GB or more in size per image, can integrate with other GIS map servers. The approach of two improvement algorithms leads to speed up the response time while preserving the data quality. This system does not only provide images on the web, but also provide GIS layers to WMS client map servers. The advantage of this approach is its efficiency lower cost in terms of cost, time and updating to obtain and utilize remote sensing image.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.139-141
• /
• 2019

Capacitive power transfer has an advantage in the simplicity of the energy link structure. So, the conventional phase -shift full bridge sometime is not always the best choice because of its complexity and high cost. On the other hand, the link capacitance is usually very low and requires high-frequency operation, but, the series resonant converter loses zero-voltage switching feature in the light load condition, which makes the switching loss high especially in CPT system. The paper proposes a new low-cost topology based on asymmetric half-bridge to achieve simplicity as well as wide zero voltage switching range. The design procedure is presented, and circuit operations are analyzed and verified by simulation.