• 치과방사선
• /
• 제23권2호
• /
• pp.373-378
• /
• 1993

저자들은 희귀한 하악과두의 골연골종으로 진단 내려진 27세 남성 환자에서 아래와 같은 사항을 관찰하였다. 1. 임상적으로 좌측안면부의 비대칭과, 교합이상 그리고 저작 시 좌측 악관절의 동통이 있었다. 2. 방사선학적으로 좌측과두에 내측으로 균일한 방사선불투과성의 종괴가 보였으며, 좌측 하악지 길이의 증가 및 우측으로의 하악 변위가 관찰되었다. 또 골스캔상에서 좌측 악관절부위의 hot spot이 관찰되었다. 3. 조직병리학적으로 불규칙한 골의 형성과 연골모를 볼 수 있었다.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.217-228
• /
• 2006

Statement of problem: Standard type of ITI solid implant model in the 6.2mm thick jaw bone was axisymmetrically modelled for finite element stress analyses. Purpose: Primary objective was to investigate the influences or the characteristic design configuration of the ITI solid implant model on the bone stress with the course of osseointegration process at the bone/implant interfaces. To simulate the characteristics of the osseointegration process, five different stages of the bone/implant interface model were implemented. As load conditions, vertical load of 50N was taken into consideration. Bone at the cervical region of implant was the areas of concern where the higher level of stress were likely to take place. Results: The results indicated that rather slightly different stress level could be obtained as a function of the osseointegration conditions. Conclusion: Under vertical load, the lower level of stress was observed at the cervical cortical bone in the initial and final stages of osseointegration. Relatively higher stress level, however, was observed during the transitional stages where the osseointegration at the cancellous bone interface were yet to fully develop.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.4.1-4.4
• /
• 2020

Background: Odontogenic cysts associated with lower third molar are common. The prognosis for surgical treatment is relatively good. However, postoperative infection discourages the clinicians. Hence, we would like to investigate the factors associated with infection after surgical treatment of cysts associated with the mandibular third molar. Methods: We retrospectively reviewed the medical and radiographic records of 81 patients who were diagnosed with dentigerous cyst or odontogenic keratocyst and underwent cyst enucleation. The factors affecting postoperative infection were divided into host factor, treatment factor, and cystic lesion factor. To identify the factors associated with postoperative infection, we attempted to find out the variables with significant differences between the groups with and without infection. Results: A total of 81 patients (64 male and 17 female) were enrolled in this study. There was no statistical relationship about the postoperative infection between all variables (gender, smoking, diabetes mellitus, age, bone grafting, related tooth extraction, previous marsupialization or decompression, type of antibiotics, cortical perforation associated with cystic lesion, preoperative infection, preoperative cyst size). Conclusions: The results of this study suggest that it is not necessary to avoid bone grafts that are concerned about postoperative infection.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.35-41
• /
• 2020

The structure of the femur bone was analyzed. Moreover, the mechanical strength of the bone was determined by considering two parameters, namely, the outer wall thickness and inner filling density to realize the 3D printing of a cortical bone and spongy bone by using a fused deposition modeling type 3D printer and ABS material. A basic experiment was conducted to evaluate the variation trend in the mechanical strength of the test specimens with the change in the parameters. Based on the results, the parameters corresponding to the highest mechanical strength were selected and applied to the artificial bone, and the mechanical strength of the artificial bones was examined under a load. Moreover, we proposed an approximation method for the 3D printing parameters to enable the comparison of the actual bones and artificial bones in terms of the strength and weight.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.182-202
• /
• 2022

PURPOSE. The aim of this study is to summarize various biomechanical aspects in evaluating the long-term stability of dental implants based on finite element method (FEM). MATERIALS AND METHODS. A comprehensive search was performed among published studies over the last 20 years in three databases; PubMed, Scopus, and Google Scholar. The studies are arranged in a comparative table based on their publication date. Also, the variety of modeling is shown in the form of graphs and tables. Various aspects of the studies conducted were discussed here. RESULTS. By reviewing the titles and abstracts, 9 main categories were extracted and discussed as follows: implant materials, the focus of the study on bone or implant as well as the interface area, type of loading, element shape, parts of the model, boundary conditions, failure criteria, statistical analysis, and experimental tests performed to validate the results. It was found that most of the studied articles contain a model of the jaw bone (cortical and cancellous bone). The material properties were generally derived from the literature. Approximately 43% of the studies attempted to examine the implant and surrounding bone simultaneously. Almost 42% of the studies performed experimental tests to validate the modeling. CONCLUSION. Based on the results of the studies reviewed, there is no "optimal" design guideline, but more reliable design of implant is possible. This review study can be a starting point for more detailed investigations of dental implant longevity.

• Journal of Korean Neurosurgical Society
• /
• 제29권11호
• /
• pp.1469-1475
• /
• 2000

Objective : The goal of this study was to evaluate the clinical outcome of the posterior C1-2 transarticular screw fixation without C1-2 sublaminar wiring in atlantoaxial instability. Methods : Between Apr. 1995 and Feb. 2000, we used this technique in treat randomly selected 17 patients (11 men, 6 women) who had atlantoaxial instability. The causes of instability were : type II-A odontoid process fracture(10 cases) ; type II-P odontoid process fracture(1 case) ; Os odontoideum(2 cases) ; transverse ligament laxity due to rheumatoid disease(1 case) ; and, transverse ligament injury without bone fracture(3 cases). All cases were operated with posterior C1-2 transarticular screw fixation with 3.5mm cortical screw and interlaminar iliac graft without sublaminar wire fixation. The mean follow-up period was 28 months(5 to 58 months) and the mean age at the time of operation was 41 years(15 to 68 years). All Patients were allowed to ambulate with Philadelphia neck collar on the first post-operation day. Results : Bony fusion was successfully achieved in all cases demonstrated at 3-month follow-up studies. There was no operative mortality or morbidity. Conclusion : The authors conclude that the posterior transarticular screw fixation without C1-2 sublaminar wiring provide adequate stability with high bony union rate in atlantoaxial instability of various causes.

• BMB Reports
• /
• 제31권1호
• /
• pp.64-69
• /
• 1998

Recent studies have suggested that integrin (CR3) participates in the signal transduction pathways of certain GPI-anchored phagocytic receptors including $Fc{\gamma}RIIIB$. One consequence of this functional linkage is an inducible association between CR3 and cortical microfilaments that is triggered by $Fc{\gamma}RIIIB$ binding to immobilized immune complexes (IC). That this signaling event requires the co-expression of $Fc{\gamma}RIIIB$ with CR3 was documented by the use of NIH 3T3 transfectants expressing both CR3 and $Fc{\gamma}RIIIB$ (clone 3-23), CR3 alone (clone 3-19), and $Fc{\gamma}RIIIB$ alone (clone 3-15). Pretreatment of 3-23 cells with protein kinase inhibitors such as staurosporine and methyl 2,5-dihydroxycinnamate (MDHC) blocked IC-stimulated CR3 microfilament proximity without affecting the extent to which $Fc{\gamma}RIIIB$ constrains the lateral membrane mobility of a subset of CR3 on the cell surface (as measured in fluorescence recovery after photobleaching experiments). These data support that CR3 and $Fc{\gamma}RIIIB$ molecules are physically and functionally associated and that ligation of FcgRIIIB triggers CR3-dependent signal transduction.

• Imaging Science in Dentistry
• /
• 제47권3호
• /
• pp.181-187
• /
• 2017

Purpose: The purpose of this study was to measure the buccal bone thickness and angulation of the maxillary incisors and to analyze the correlation between these parameters and the root position in the alveolar bone using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of 398 maxillary central and lateral incisors from 199 patients were retrospectively reviewed. The root position in the alveolar bone was classified as buccal, middle, or palatal, and the buccal type was further classified into subtypes I, II, and III. In addition, the buccolingual inclination of the tooth and buccal bone thickness were evaluated. Results: A majority of the maxillary incisors were positioned more buccally within the alveolar bone, and only 2 lateral incisors(0.5%) were positioned more palatally. The angulation of buccal subtype III was the greatest and that of the middle type was the lowest. Most of the maxillary incisors exhibited a thin facial bone wall, and the lateral incisors had a significantly thinner buccal bone than the central incisors. The buccal bone of buccal subtypes II and III was significantly thinner than that of buccal subtype I. Conclusion: A majority of the maxillary incisor roots were positioned close to the buccal cortical plate and had a thin buccal bone wall. Significant relationships were observed between the root position in the alveolar bone, the angulation of the tooth in the alveolar bone, and buccal bone thickness. CBCT analyses of the buccal bone and sagittal root position are recommended for the selection of the appropriate treatment approach.

• Imaging Science in Dentistry
• /
• 제51권1호
• /
• pp.81-86
• /
• 2021

Purpose: This study was performed to assess and describe the imaging features of 40 cases of Stafne bone defects (SBDs) on computed tomographic (CT) examinations. Materials and Methods: This study collected data, including age and sex, from 40 patients with SBDs who underwent CT exams. The imaging features of the SBDs were assessed in terms of their location, average size, the relationship of their contour with the cortical plate of the lingual mandible, bone margins, degree of internal density, shape, topographic relationship between the defect and the mandibular edge, the distance from the SBD to the base of the mandible, and the Ariji classification (type I, II, and III). Results: The average age was 57.3 years(range, 28-78 years), and the patients were predominantly male (70%). In all cases (100%), the posterior unilateral lingual SBD variant was observed. Within the Ariji classification, type I was the most common (60%). Among the most frequently observed radiographic characteristics were thick sclerotic bone margin across the entire defect contour, completely hypointense internal content, an oval shape, and continuity with the mandibular base with discontinuity of the mandibular edge. Conclusion: This study showed that posterior SBDs could present with an oval or rounded shape, complete hypodensity, and thick sclerotic margins. Likewise, SBDs could appear almost anywhere, with minor differences from the classic SBD appearance. It is fundamental for dental practitioners to know the imaging features of SBDs, since they are diagnosed primarily based on imaging.

• International Journal of Oral Biology
• /
• 제44권4호
• /
• pp.173-181
• /
• 2019

The CC chemokine receptor 5 (CCR5) is a G protein-coupled receptor that regulates chemotaxis and effector functions of immune cells. It also serves as the major co-receptor for the entry of human immunodeficiency virus (HIV). Recently, CCR5 inhibitors have been developed and used for the treatment or prevention of HIV infections. Additionally, it has been identified that CCR5 controls bone homeostasis by regulating osteoclastogenesis and the communication between osteoblasts and osteoclasts. However, the effects of CCR5 inhibition on bone tissue in elderly patients are unknown. This study aimed to examine the bone phenotype of aged CCR5 knockout (KO) mice. Femoral and tibial bones were isolated from 12-month and 18-month old wild-type (WT) and CCR5 KO mice, and microcomputed tomography and histology analyses were performed. Twelve-month-old CCR5 KO mice exhibited a decreased trabecular bone mass and cortical bone thickness in both femoral and tibial bones compared with age-matched WT mice. Eighteen-month-old mice also showed a decreased trabecular bone mass in femurs compared with control WT mice, but not in tibial bones. Unlike in 12-month-old mice, the cortical margin of femurs and tibias in 18-month-old mice were rough, likely because they were aggravated by the deficiency of CCR5. Overall, our data suggest that the deficiency of CCR5 with aging can cause severe bone loss. When CCR5 inhibitors or CCR5 inactivating technologies are used in elderly patients, a preventive strategy for bone loss should be considered.