• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.14-22
• /
• 1990

For efficient use of solar energy in plastic greenhouse, thermal storage system was developed. The system was constructed with the counter-flow type air-water heat exchanger using a thin polyethylene film as a medium of heat exchange parts. Experiments were carried out to investigate the heat exchange rate, optimum water flow rate, overall heat transfer coefficient, and the effectiveness of the counter-flow type air-water heat exchanger with polyethylene film bags. Mathematical model to predict air temperature leaving heat exchanger was developed. The results obtained in the present study are summarized as follows. 1. Heat exchange rate in the counter-flow type air-water heat exchanger with polyethylene film bags was compared to that of polyethylene film. Heat exchange rate was almost identical at air velocity of 0.5m/s on polyethylene film surface. But, heat exchange rate of heat exchanger with polyethylene film bag was $32{\sim}55KJ/m^2$ hr higher than that of polyethylene film at air velocity of 1.0m/s. 2. Considering the formation of uniform water film and the sufficient heat exchange rate of polyethylene film bags, optimum water flow rate in polyethylene film bags was $3.0{\sim}6.0{\ell}/m^2$ min. 3. The overall heat transfer coefficient of polyethylene film bags was found to be $35.0{\sim}130.0KJ/m^2\;hr\;^{\circ}C$ corresponding to the air velocity ranging 0.5 to 4.0 m/s on polyethylene film surface. And the overall heat transfer coefficient showed almost linearly increasing tendency to the variation of air velocity. 4. Mathematical model to predict air temperature leaving the heat exchanger was developed, resulting in a good agreement between the experimental and predicted values. But, the experimental results were a little lower than predicted. 5. Effectiveness of heat exchanger for the experiment was found to be 0.40~0.81 corresponding to the number of transfer units due to the variation of air velocity ranging 0.6 to 1.7 m/s.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.41
• /
• pp.237-266
• /
• 2009

KORUS-FTA are consist of articles 8. In order to the subjects are, application of a safeguard measures, conditions and limitations, provisional measures, compensation, global safeguard actions, definitions, antidumping and countervailing duties, committee on trade remedies. In especially, regarding application of a safeguard measures under KORUS-FTA, if as a result of the reduction or elimination of a customs duty under this agreement, an originating good of the other party is being imported into the territory of a party in such increased quantities, in absolute terms or relative to domestic production, and under such conditions that the imports of such originating good from the other party constitute a substantial cause of serious injury, or threat thereof, to a domestic industry producing a like or directly competitive good, the party may: suspend the further reduction of any rate of customs duty on the good provided for under this agreement; increase the rate of customs duty on the good to a level not to exceed the lesser of: the most-favored-nation (MFN) applied rate of duty on the good in effect at the time the action is taken; and the MFN applied rate of duty on the good in effect on the day immediately preceding the date this Agreement enters into force; or in the case of a customs duty applied to a good on a seasonal basis, increase the rate of duty to a level that, for each season, does not exceed the lesser of: the MFN applied rate of duty on the good in effect for the corresponding season immediately preceding the date of application of the safeguard measure; and the MFN applied rate of duty on the good in effect for the corresponding season immediately preceding the date this agreement enters into force.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1459-1463
• /
• 2008

Second-order rate constants (kN) have been measured spectrophotometrically for reactions of 3,4-dinitrophenyl 2-thiophenecarboxylate (2) with a series of alicyclic secondary amines in 80 mol % $H_2O$/20 mol % dimethyl sulfoxide at 25.0 ${^{\circ}C}$. The Brønsted-type plot exhibits a downward curvature for the aminolysis of 2. The curved Brønsted-type plot is similar to that reported for the corresponding reactions of 2,4-dinitrophenyl 2- thiophenecarboxylate (1). The reactions of 1 and 2 have been suggested to proceed through the same mechanism, i.e., through a zwitterionic tetrahedral intermediate ($T^{\pm}$) with a change in the rate-determining step. Substrate 2 is less reactive than 1 toward weakly basic amines (e.g., $pK_a$ < 10.4) but becomes more reactive as the basicity of amines increases further. Dissection of kN into the microscopic rate constants has revealed that the reaction of 2 results in a smaller $k_2/k_{-1}$ ratio but larger $k_1$ than the corresponding reaction of 1. Steric hindrance exerted by the ortho-nitro group has been suggested to be responsible for the smaller $k_1$ value found for the reactions of 1.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.355-361
• /
• 2009

This paper proposes a new basic unit level rate control algorithm which generates the output bits corresponding to the target bits. The H.264 standard uses various coding modes and optimization methods to improve the compression performance, which makes it difficult to control the generated traffic accurately. In the proposed scheme, the allocated bits to a frame are distributed to all basic units properly to encode each basic unit according to the bit budget. After encoding the frame, the encoding parameters are adjusted according to the difference between the target and the resulting values. It is shown by experimental results that the new algorithm can generate output bit rates accurately corresponding to the target bit rates with the PSNR performance better than that of the existing rate control algorithm.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1251-1255
• /
• 2003

Second-order rate constants have been determined spectrophotometrically for the reaction of phenyl 4-nitrophenyl carbonate with a series of primary amines in $H_2O$ containing 20 mol % DMSO at 25.0 ${\circ}$C. The Bronsted-type plot is linear with a ${\beta}_{nuc}\;0.69 {\pm} 0.04$, which is slightly smaller than the ${\beta}_{nuc}$ values for the reactions of 4-nitrophenyl acetate ( $\beta_{nuc}= 0.82 {\pm} 0.03$) and benzoate ( $\beta_{nuc} = 0.76 {\pm} 0.01$), indicating that the reaction proceeds through a tetrahedral zwitterionic intermediate $T^{\pm}$. The carbonate is more reactive than the corresponding acetate and benzoate. The changing Me (or Ph) to PhO has resulted in a decrease in the ${\beta}_{nuc}$ value without changing the reaction mechanism but an increase in the reactivity. The electronic effect of the substituent in the nonleaving group appears to be responsible for the enhanced reactivity of the carbonate compared with the corresponding acetate and benzoate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.193-204
• /
• 1999

Performance of a variable-speed, roller-type vane compressor was evaluated at low evaporating temperature. First, an experimental investigation was conducted to examine the performance variation as functions of both outdoor temperature and rotating speed. For this purpose, a typical heat pump was implemented as a test apparatus to measure mass flow rate and power input. Secondly, computational investigations corresponding to the heat pump test conditions were performed to predict compressor performance using ORNL Map-Based compressor model. Results obtained from the heat-pump experiments showed that both mass flow rate and power consumption were sensitively dependent on both evaporating temperature and compressor speed as was predicted from the computational results. From the comparisons of both experimental and computational results, it was well recognized that the ORNL model was subjected to larger error in the accuracy of prediction as outdoor temperature decreased. When the outdoor temperature was above $-5^{\cire}C$, errors of predicted values corresponding to both mass flow rate and power consumption were estimated as $\pm$10% and $\pm$ 15%, respectively. Finally, it is suggested that the ORNL model needs to be re-evaluated if compressor map data tested below $-5^{\cire}C$(in evaporating temperature) are available.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.890-895
• /
• 1997

The approximate rates and stoichiometry of the reaction of excess lithium tripiperidinoaluminum hydride (LTPDA), an alicyclic aminoaluminum hydride, with selected organic compounds containing representative functional groups under the standardized conditions (tetrahydrofuran, 25°) were examined in order to define the reducing characteristics of the reagent for selective reductions. The reducing ability of LTPDA was also compared with those of the parent lithium aluminum hydride (LAH) and lithium tris(diethylamino)aluminum hydride (LTDEA), a representative aliphatic aminoaluminum hydride. In general, the reactivity of LTPDA toward organic functionalities is weaker than LTDEA and much weaker than LAH. LTPDA shows a unique reducing characteristics. Thus, benzyl alcohol, phenol and thiols evolve a quantitative amount of hydrogen rapidly. The rate of hydrogen evolution of primary, secondary and tertiary alcohols is distinctive. LTPDA reduces aldehydes, ketones, esters, acid chlorides and epoxides readily to the corresponding alcohols. Quinones, such as p-benzoquinone and anthraquinone, are reduced to the corresponding diols without hydrogen evolution. Tertiary amides and nitriles are also reduced readily to the corresponding amines. The reagent reduces nitro compounds and azobenzene to the amine stages. Disulfides are reduced to thiols, and sulfoxides and sulfones are converted to sulfides. Additionally, the reagent appears to be a good partial reducing agent to convert primary carboxamides into the corresponding aldehydes.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.91-98
• /
• 2011

In this paper, a multi-channel speech enhancement method using the linearly constrained minimum variance (LCMV) algorithm and a variable learning rate control is proposed. To control the learning rate for adaptive filters of the LCMV algorithm, the direction of arrival (DOA) is measured for each short-time input signal and the likelihood function of the target speech presence is estimated to control the filter learning rate. Using the likelihood measure, the learning rate is increased during the pure noise interval and decreased during the target speech interval. To optimize the parameter of the mapping function between the likelihood value and the corresponding learning rate, an exhaustive search is performed using the Bark's scale distortion (BSD) as the performance index. Experimental results show that the proposed algorithm outperforms the conventional LCMV with fixed learning rate in the BSD by around 1.5 dB.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.1
• /
• pp.99-110
• /
• 2004

In order to investigate the performance of carbon dioxide PSA over zeolite adsorbent, the present study showed results of isotherm measurement, cyclic operation of 3-bed apparatus, and the corresponding numerical simulation. The experiment data of bed temperature, purity, recovery were matched well with that of numerical simulation. Purity of both gas and adsorbent phase increased rapidly with rinse rate but the degree of increase was retarded for large rinse rate The total amount of adsorbed increased only 10% even if rinse rate was enlarged to 4 times. Optimal rinse rate was 7N㎥/hr in this study. The heating rinse led to augments in recovery and productivity, possibly thanks to ease of description resulting from increased volumetric rinse rate and temperature rise in the column.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.240-247
• /
• 2005

In order to analyze effects of strain rate on consolidation characteristics on Busan clay, a series of constant rate of strain(CRS) consolidation tests with different strain rate and incremental loading test(ILT) were performed. From experimental test results, it was found that the preconsolidation pressure was dependent on the corresponding strain rate occurred during consolidation process. Also, consolidation curves normalized with respect to preconsolidation pressure gave a unique stress-strain curve. Coefficient of consolidation and permeability estimated from CRS test had a tendancy to converge to a certain value at normally consolidated range regardless of strain rate. An increase in excess pore pressure without change of total stress was noted on the incremental loading test after the end of loading.