• 대한화학회지
• /
• 제14권1호
• /
• pp.45-48
• /
• 1970

"Significant liquid structure"의 이론과 반응 속도 이론을 이용 WLF점도식 꼴을 도출하였다. 반 실험적 WLF 점도식 내 실험 Parameter와 도출된 이론식 중의 해당된 항을 비교 검토하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.559-561
• /
• 1992

Three strains each of L. bulgaricus and S. thermophilus isolated from indigenous dahi were examined for their rate of acid production and corresponding pH values in skim milk medium incubated at $40^{\circ}C$. No significant increase in titrable acidity or decrease in pH were recorded from initial period up to 2nd hour in both the strains. Following this period, however, there was a continuous increase in titrable acidity and a decrease in pH value in the milk for all the tested strains. Further it was observed that there was a variation among these strains for their acid production rate. High rate of acid production was recorded for the L. bulgaricus as compared to S. thermophilus. The results further, suggested that efforts should be made to select a proper pair of L. bulgaricus and S. thermophilus according to their rate of acid production, at a particular temperature in order to produce a good quality product.

• 통합자연과학논문집
• /
• 제6권1호
• /
• pp.53-56
• /
• 2013

We are interested in the rate of convergence of solutions of 2D Navier-Stokes equations in a smooth bounded domain as the viscosity tends to zero under Navier friction condition. If the initial velocity is smooth enough($u{\in}W^{2,p}$, p>2), it is known that the rate of convergence is linearly propotional to the viscosity. Here, we consider the rate of convergence for nonsmooth velocity fields when the gradient of the corresponding solution of the Euler equations belongs to certain Orlicz spaces. As a corollary, if the initial vorticity is bounded and small enough, we obtain a sublinear rate of convergence.

• International Journal of Reliability and Applications
• /
• 제13권2호
• /
• pp.91-104
• /
• 2012

Sarhan and Kundu (2009) introduced a new distribution named as the generalized linear failure rate distribution. This distribution generalizes several well known distributions. The probability density function of the generalized linear failure rate distribution can be right skewed or unimodal and its hazard function can be increasing, decreasing or bathtub shaped. This distribution can be used quite effectively to analyze lifetime data in place of linear failure rate, generalized exponential and generalized Rayleigh distributions. In this paper, we apply the simulated annealing algorithm to obtain the maximum likelihood point estimates of the parameters of the generalized linear failure rate distribution. Simulated annealing algorithm can not only find the global optimum; it is also less likely to fail because it is a very robust algorithm. The estimators obtained using simulated annealing algorithm have been compared with the corresponding traditional maximum likelihood estimators for their risks.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.35-41
• /
• 2001

In recent applications, map controlled thermostat has been adapted to optimize engine cooling system and vehicle cooling system. First of all, this strategy is focused on improving fuel consumption rate and reducing emissions, especially unburned hydrocarbon. The object can be obtained through controlling engine metal temperature by varying engine coolant temperature with engine load and speed. To achieve this goal, it is necessary to understand the characteristics of engine metal temperature and heat rejection rate to coolant. From the results of tested engines, it is obvious that fuel consumption rate has more dominant effect on engine metal temperatures than the corresponding engine power does. Also, Re-Nu relation which shows heat rejection rate to coolant in function of air-fuel mixture and engine specifications has been studied. Also, the empirical Re-Nu relation at full loaded engine was developed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.165-177
• /
• 2019

This paper considers corrosion wastage of two ship hull structure members as a part of investigated fuel oil tanks of 25 aging bulk carriers. Taking into account that many factors which influence corrosion wastage of ship hull structures are of uncertain nature, the related corrosion rate ($c_1$) is considered here as a real-valued continuous distribution, assuming that the corrosion wastage starts after 5, 6 or 7 years. In all considered cases, by using available data and applying three basic statistical tests, it is established that between two-parameter continuous distributions, normal, Weibull and logistic distributions are best fitted distributions for the mentioned corrosion rate ($c_1$). Note that the presented statistical, numerical and graphical results concerning two mentioned ship hull structure members allow to compare and discuss the corresponding probabilistic estimates for the corrosion rate ($c_1$).

• 한국수정란이식학회지
• /
• 제4권1호
• /
• pp.28-34
• /
• 1989

These experiments were carried out to determine the effect of cell stage in embryo bisection on the sub-Sequent in vitro and in vivo development in mouse. The embryos of ICR mouse were microsurgicaily bisected at 2-cell, 4-cell, 8-cell, morula and blastocyst stage using a microsurgical blade attached a micromanipulator. These demi-embryos without zona pellucida were cultured up to blastocyst stage and transferred to pseudopregnant mice, and the development of these demi-embryos was compared with the results of intact embryos of the corresponding cell stage. The successful rate of mouse embryo bisection at 4-cell stage (59.0%) was significantly (p <0.05) lower than those at 8-cell (75.6%), 2ce11 (80.7%) or morula stage (84.8%), and highest at blastocyst stage (95.7%). When the bisected embryos without any damage from microsurgery were cultured in vitro up to blastocyst,the in vitro de'velopment of demi-embroys bisected at morula to blastocyst was 91.6 to 95.3%, which was similar to the culture result of intact embryos of corresponding stage. However, the in vitro development of demi-em-bryos bisected at 2- to 8-cell stage was signiflcantiy (p <0.05) lower.The post-transfer implantation rate of demi-embryos developed in vitro to eu-blastocyst were 19.6 and 25.4% in demi-embryos bisected at morula and blastocyst stage,respectively and not significantly (P <0.05)different from the result of intact embryos of the same stage. However, the implantation rates of demi-embryos bisected at 2- or 8-cell stage were significantly (P <0.05) lower than the result from the intact embryos of the corresponding stage.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.179-182
• /
• 2011

Second-order rate constants ($k_{OH^-}$) have been measured spectrophotometrically for reactions of Y-substituted phenyl phenyl thionocarbonates (4a-i) with $OH^-$ in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$. The $k_{OH^-}$ values for the reactions of 4a-i have been compared with those reported previously for the corresponding reactions of Y-substituted phenyl phenyl carbonates (3a-i) to investigate the effect of changing the electrophilic center from C=O to C=S on reactivity and mechanism. Thionocarbonates 4a-i are less reactive than the corresponding carbonates 3a-i although 4a-i are expected to be more reactive than 3a-i. The Bronsted-type plot for reactions of 4a-i is linear with $\beta_{lg}$ = -0.33, a typical $\beta_{lg}$ value for reactions reported to proceed through a stepwise mechanism with formation of an intermediate being the rate-determining step (RDS). Furthermore, the Hammett plot correlated with $\sigma^o$ constants results in much better linearity than that correlated with $\sigma^-$ constants, indicating that expulsion of the leaving group is not advanced in the RDS. Thus, alkaline hydrolysis of 4a-i has been concluded to proceed through a stepwise mechanism with formation of an intermediate being RDS, which is in contrast to the forced concerted mechanism reported for the corresponding reactions of 3a-i. Enhanced stability of the intermediate upon modification of the electrophilic center from C=O to C=S has been concluded to be responsible for the contrasting mechanisms.

• 한국미생물·생명공학회지
• /
• 제18권4호
• /
• pp.394-400
• /
• 1990

유전자 조작된 세포 발효공정의 생산수율을 최대화하기 위하여 세포의 성장속도와 제품 생성속도간의 상반관계를 고려하여야 한다. 유전자 조작된 E.coli 발효에 있어, 최적화 이론을 적용하여 두 속도의 가중치를 결정함으로써 생산수율의 최대화를 꾀하였다. 성장저해제의 농도는 비 성장속도를 조절하고 결국 융합된 유전자의 발현 속도를 조절하는 변수로 사용되다. 이런 system의 특성을 위하여 간단한 unstructured model를 사용하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.3-46
• /
• 1999

A new method called SRICOS is proposed to predict the scour depth z versus time t around a cylindrical bridge pier of diameter D founded in clay. The steps involved are ; 1. taking samples at the bridge pier site, 2. testing them in an Erosion Function Apparatus called the EFA to obtain the scour rate z versus the hydraulic shear stress applied $\tau$, 3. predicting the maximum shear stress r max which will be induced around the pier by the water flowing at ν Ο before the scour hole starts to develop, 4. using the measured z versus r curve to obtain the initial scour rate zi corresponding to r max , 5. predicting the maximum depth of scour zmax for the pier, 6. using zi and zmarx to develop the hyperbolic function describing the scour depth z versus time t curve, and 7. reading the z vs. t curve at a time corresponding to the duration of the flood to find the scour depth which will develop around the pier. A new apparatus is developed to measure the z vs t curve of step 2, a series of advanced numerical simulations are performed to develop an equation for the $\tau$ max value of step 3, and a series of flume tests are performed to develop an equation for the zmax value of step 5. The method is evaluated by comparing predictions and measurements in 42 flume experiments.