• 한국멀티미디어학회논문지
• /
• 제8권9호
• /
• pp.1195-1207
• /
• 2005

본 논문에서는 기하 위상 정보를 이용한 영상 정합 기법에 관해 기술한다. 기존의 특징 점 기반 대응점 검색 기법들이 주로 평행 이동 형 형태나 약간의 회전 및 상하 이동요소가 포함된 영상만을 처리하는 것과 달리 큰 회전이나 상하이동요소가 포함된 입력영상들의 정화한 중첩영역을 자동으로 빠르게 검색하는 방법을 제안한다. 제안한 방법은 영상내의 특징 점들의 기하 위상 정보와 특징점 사이의 거리 정보를 가지는 DT(Distance Transform) map을 이용하여 정합 위치를 찾기 위한 계산 량을 크게 감축시키고 특히 회전이나 상하 이동요소가 포함된 영상들 간의 정합영역을 검색하는데 있어서 좋은 성능을 나타낸다.

• 건축역사연구
• /
• 제20권6호
• /
• pp.147-168
• /
• 2011

The objective of this study is to establish the method of conservation for traditional Korean settlements, based on the field surveys on the representative traditional settlements in Korea and China. The method is approached from grasping the conservation mechanism in which non-physical aspects deeply influence physical ones. The study has analyzed the characteristics and problems in the current methods of conservation for the traditional settlements, through comparing conservation practices at the World Heritage-class settlements such as Yangdong, Hahoi, and Oeam villages in Korea and Xidi-cun, Hong-cun, and Dangjia-cun in China. As a consequence of the study, the conservation method for the traditional Korean settlements is established as follows; Firstly, the conservation targets are classified into 4 types in terms of the relations of elements; individual, correspondent, sequential, and network elements. Secondly, the conservation strategies include the structuralizations of targets, by means of sequencing and networking. Thirdly, the conservation programs are made in consideration of the sustenance, transformation, replacement, and extinction of traditional use patterns.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.144-147
• /
• 1997

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network), has been considered. The investigated problem involves the adequate selection of the drawing die angle and the correspondent reduction rate sequence in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite element simulation are selected by using orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study, it is shown that the new technique using ANN is useful method in application to the wide range of metal forming process.

• 소성∙가공
• /
• 제7권2호
• /
• pp.127-138
• /
• 1998

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network) has been considered. The investigated problem involves the ade-quate selection of the drawing die angle and the correspondent reduction rate in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite ele-ment simulation are selected by using the orthogonal array. Also the orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study it is shown that the application of new technique using ANN and Othogonal array table to the process design of metal forming process is useful method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.370-376
• /
• 2005

This paper is described the program algorithm which can easily estimate dynamics of test support system by using mathematica tool based on the finite element method. We can determine the geometry, dimensions of the test support system, through tool stated in this paper for a certain test conditions. As a result of computer simulation and manufactured test support system's experiment in oder to verify suggested program, the dynamics of the test support system was well correspondent each other.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.465-468
• /
• 2008

In this paper, ABAQUS, one of the implicit finite element codes, is used to analyze the U-channel Draw benchmark problem of NUMISHEET 2005. Forming and springback stages have been done consecutively to compare their results with the experimental ones. The main measures for comparing are the side wall curl and angle. The result by numerical analysis are shown generally to be correspondent with the experimental results that the max. error is confined under about 10%.

• 한국항행학회논문지
• /
• 제19권1호
• /
• pp.60-65
• /
• 2015

본 논문에서는 2.4 GHz ISM대역에서 사용가능한 0차 공진 안테나를 새롭게 제안하였다. 2.4 GHz ISM대역을 사용하는 Wi-fi, Bluetooth 및 Zigbee와 같은 무선통신 시스템의 경우, 방향에 따른 수신 전계강도의 변화가 없는 전방향 방사패턴을 가진 안테나의 사용을 필요로 한다. 0차 공진 안테나의 경우 안테나의 공진길이에 무관하게 소형화에 유리할 뿐만 아니라 전방향성의 방사패턴을 가지는 장점이 있다. 제안된 안테나는 단위 요소셀의 크기를 모노폴 안테나의 공진길이인 ${\lambda}/4$이하로 정하고 이를 2소자로 배열한 형태이다. 설계에 이용된 PCB의 크기는 $50{\times}50mm^2$이고 제안된 안테나는 PCB의 중상부에 $8{\times}5mm^2$의 제한된 크기로 설계 및 제작되었다. 제작된 안테나의 특성측정결과, 임피던스 대역폭($S_{11}{\leq}-10dB$)이 100 MHz (2.4~2.5 GHz)로 크기에 비해 꽤 넓은 대역폭을 얻을 수 있었으며, 해당 대역에서 3 dBi 이상의 높은 이득을 얻을 수 있었다.