• 전기학회논문지
• /
• 제59권4호
• /
• pp.693-699
• /
• 2010

General transformer's life is known as paper insulation' life. If a transformer is degraded by these aging factors, it is known that electrical, mechanical and chemical characteristics for transformer's oil-paper are changed. When the kraft paper is aged, the cellulose polymer chains break down into shorter lengths. It causes decrease in both tensile strength and degree of polymerization of paper insulation. The paper breakdown is accompanied by an increase in the content of furanic compounds within the dielectric liquid. In this paper it is aimed at analysis on correlation between aging characteristics for insulating diagnosis of thermally aged paper. For investigating the accelerated aging process of oil-paper samples accelerating aging cell was manufactured for estimating variation of paper insulation during 500 hours at $140^{\circ}C$ temperature. To derive the results, it was performed analysis such as tensile strength(TS), depolymerization(DP), dielectric strength(DS), relative permittivity, water content(WC) and furan compound(FC) for aged paper. Also for analyzing correlation between insulating degradation characteristics, we used linear regression method. As as results of linear regression analysis, there was a close correlation between TS and DP. WC, FC. But dielectric strength was a weak correlation with aging time.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권2호
• /
• pp.81-89
• /
• 1999

This study estimates the correlation dimensions of the land-sea breeze phenomenon, that has a clear diurnal cycle, in order to gain a more detailed understanding of this phenomenon. The data adopted include north-south wind velocity component(v) and temperature(T) time series that were observed at Kimhae Airport and Inje University over a period of 5 days, from the 4th to the 8th of August, 1994. The embedding phase space of the time series were reconstructed from 2 to 14 dimensions, and the correlation dimensions of the attractors were then estimated. The results show that the land-sea breeze phenomenon exhibits a deterministic chaos with non-integer correlation dimension values between 2 and 3. Accordingly, 3 is the minimum number of independent variables required to model the dynamics of the landsea breeze phenomenon in the Kimhae area. Since the saturated embedding dimension, when the correlation dimension remains unchanged, is larger for the wind velocity v-component than for temperature, this indicates that wind velocity is susceptible to topology.

• 대한인간공학회지
• /
• 제31권6호
• /
• pp.785-791
• /
• 2012

Objective: The aim of this study was to investigate the correlation between 3D visual fatigue and physiological measures by canonical correlation analysis enabling to categorical correlation. Background: Few studies have been conducted to investigate the physiological mechanism underlying the visual fatigue caused by processing 3D information which may make the cognitive mechanism overloaded. However, even the previous studies lack validation in terms of the correlation between physiological variables and the visual fatigue. Method: 9 Female and 6 male subjects with a mean age of $22.53{\pm}2.55$ voluntarily participated in this experiment. All participants were asked to report how they felt about their health sate at after viewing 3D. In addition, Low & Hybrid measurement test(Event Related Potential, Steady-state Visual Evoked Potential) and for evaluating cognitive fatigue before and after viewing 3D were performed. The physiological signal were measured with subjective fatigue evaluation before and after in watching the 3D content. For this study suggesting categorical correlation, all measures were categorized into three sets such as included Visual Fatigue set(response time, subjective evaluation), Autonomic Nervous System set(PPG frequency, PPG amplitude, HF/LF ratio), Central Nervous System set(ERP amplitude P4, O1, O2, ERP latency P4, O1, O2, SSVEP S/N ratio P4, O1, O2). Then the correlation of three variables sets, canonical correlation analysis was conducted. Results: The results showed a significant correlation between visual fatigue and physiological measures. However, different variables of visual fatigue were highly correlated to respective HF/LF ratio and to ERP latency(O2). Conclusion: Response time was highly correlated to ERP latency(O2) while the subjective evaluation was to HF/LF ratio. Application: This study may provide the most significant variables for the quantitative evaluation of visual fatigue using HF/LF ratio and ERP latency based human performance and subjective fatigue.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3391-3396
• /
• 2012

Two-dimensional infrared (2D-IR) spectroscopy can probe the fast structural evolution of molecules under thermal equilibrium. Vibrational frequency fluctuation caused by structural evolution produced the time-dependent line shape change in 2D-IR spectrum. A variety of methods has been used to connect the evolution of 2D-IR spectrum with Frequency-Frequency Correlation Function (FFCF), which connects the experimental observables to a molecular level description. Here, a new method to extract FFCF from 2D-IR spectra is described. The experimental observable is the time-dependent frequency shift of maximum peak position in the slice spectrum of 2D-IR, which is taken along the excitation frequency axis. The direct relation between the 2D-IR peak shift and FFCF is proved analytically. Observing the 2D-IR peak shift does not need the full 2D-IR spectrum which covers 0-1 and 1-2 bands. Thus data collection time to determine FFCF can be reduced significantly, which helps the detection of transient species.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권2호
• /
• pp.30-40
• /
• 2011

In this study, we compared the analysis results before and after the detrending for the data. According to the comparison results, correlation functions were not much changed while autocorrelation and spectral density functions were largely varied. Especially, time series data with a long-term variation trend showed a distinctive difference. This study demonstrated a usefulness of the detrending for a further analysis.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.345-350
• /
• 1999

The effectiveness of software error compensation for thermally induced machine tool errors relies on the prediction accuracy of the pre-established thermal error models. The selection of optimal sensor locations is the most important in establishing these empirical models. In this paper, a methodology for the selection of optimal sensor locations is proposed to establish a robust linear model which is not subjected to collinearity. Correlation coefficient and time delay are used as thermal parameters for optimal sensor location. Firstly, thermal deformation and temperatures are measured with machine tools being excited by sinusoidal heat input. And then, after correlation coefficient and time delays are calculated from the measured data, the optimal sensor location is selected through hard c-means clustering and sequential selection method. The validity of the proposed methodology is verified through the estimation of thermal expansion along Z-axis by spindle rotation.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.181-189
• /
• 1993

Over the past two decades, forecasting has gained widespread acceptance as an integral part of business planning and decision making. Accurate forecasting is a prerequisite to successful planning. Accordingly, recent advances in forecasting techniques are of exceptional value to corporate planners. But most of forecasting mothods are reveal its limit and problem for precision and reliability duing to each relationship for raw data and possibility of explanation for each variable. Therefore, to construct the Integrated Forecasting Model(IFM) for Information Factor Analysis, it shoud be considered that whether law data has time lag and variables are explained. For this. following several method can be used : Least Square Method, Markov Process, Fibonacci series, Auto-Correlation, Cross-Correlation, Serial Correlation and Random Walk Theory. Thus, the unified property of these several functions scales the safety and growth of the system which may be varied time-to-time.

• Asia pacific journal of information systems
• /
• 제11권4호
• /
• pp.175-186
• /
• 2001

Though people frequently rely on intuition in managing activities, they rarely use it in developing effective decision-making support systems. In this report, we investigate the correlations between characteristics of cognition and emotion and judgmental time-series forecasting accuracy, and compare their strengths by using a self-supervised adaptive neural network. Through the experiments, we hope to help find a desirable atmosphere for decision-making. Our experiments showed that both cognition characteristics and emotion characteristics had correlations with the time-series forecasting accuracy, and that cognition characteristics had larger correlation than emotion characteristics. We also found that conceptual style had larger correlation than behavioral or analytical styles with the accuracy.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.51-63
• /
• 1995

In this paper, a new real-time optical image switching system based on the phase-typed BPEJTC is suggested. The phase filter mask which has the arbitrary position mapping function between input and output planes is constructed by using the modified JTPS of the BPEJTC. Then, the input image is convolved with this phase filter mask in the spatial frequency domain and through further Fourier transform the input image is switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switching system is opto-digitally constructed and through some experiments on image switching the possiblity of real-time implementation of the multiple optical image switching system by using the BPEJTC is suggeste.