• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1131-1134
• /
• 2003

Unknown parameters of a nonlinear system were estimated using a signal compression method. The estimated parameters were natural frequency and tile damping coefficient. This study applied a algorithm using tile comparison of the cross-correlation coefficient between the impulse response from a model and it from the signal compression method. The impulse through linear element included in a nonlinear system could be obtained by the signal compression method. The unknown parameters of the linear element could be estimated by comparing the Bode plots of system's impulse response with them of model's response. In this study, a LSCM(LabVIEW-Signal-Compression-Method) was developed to identify a nonlinear system. The LSCM consisted of National Instrument's (NI) Data Acquisition (DAQ) Board (Model PCI-1200), a monitoring program using LabVIEW software package, DAQ Signal Accessory Board, and 2nd-order electric circuits. The designed electric circuits consisted of resistors, inductors and capacitors. To evaluate the performance of the LSCM, the response from model with known parameters is compared with the response from the real system using the monitoring program. The results from simulation of experiment showed that the developed LSCM provided a reliable estimation performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.575-579
• /
• 2000

First lactation records of 683 Murrah buffaloes maintained at NDRI, Karnal which were progeny of 84 sires used for comparing the heritability estimates of age at first calving, first lactation milk yield and first service period under single and multiple trait models using restricted maximum likelihood (REML) method of estimation under an individual animal model. The results indicated that the heritability estimates may vary under single and multiple trait models depending upon the magnitude of genetic and environmental correlation among the traits being considered. Therefore, a single or multiple trait model is recommended for estimation of variance components depending upon the goal of breeding programme. However, there may not be any advantage of considering a trait with zero or near zero heritability and having no or very low genetic correlation with other traits in the model. Lower heritability estimates of part lactation yield (120-day milk yield) implied that there may not be any advantage of considering this trait in place of actual 305-day milk yield, whereas, comparable heritability estimates of predicted 305-day milk yield suggested that it could be used for sire evaluation to reduce the cost of milk recording under field conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.874-882
• /
• 2001

The static and fatigue tests have been carried out to verify the validity of a generalized residual strength degradation model. And a new method of parameter determination in the model is verified experimentally to account for the effect of tension-compression fatigue loading of spheroidal graphite cast iron. It is shown that the correlation between the experimental results and the theoretical prediction on the statistical distribution of fatigue life by using the proposed method is very reasonable. Furthermore, it is found that the correlation between the theoretical prediction and the experimental results of fatigue life in case of tension-tension fatigue data in composite material appears to be reasonable. Therefore, the proposed method is more adjustable in the determination of the parameter than maximum likelihood method and minimization technique.

• The Journal of Engineering Geology
• /
• v.9 no.2
• /
• pp.101-118
• /
• 1999

The pumping test analysis on 28 pumping test data in Duksan hot-spring area was performed using the fractal model, the leaky fractal model, and the steady-state dual-porosity fractal model. The fractional flow dimension 1.9 or 2.0 was determined in the central put of the hot spring and the fractional flow dimension 1.5-1.7 in the marginal area. For the flow dimension 2.0, the correlation between the transmissivity and the productivity index by the aquifer loss was much better than that between the transmissivity and the specific yield by the total drawdown. On the other hand, for the flow dimension 1.9, the correlation between the generalized transmissivity and the productivity index was very similar to that between the generalized transmissivity and the specific yield.

• Computers and Concrete
• /
• v.15 no.4
• /
• pp.485-501
• /
• 2015

Cooling by the flow of water through an embedded cooling pipe has become a common and effective artificial thermal control measure for massive concrete structures. However, an extreme thermal gradient induces significant thermal stress, resulting in thermal cracking. Using a mesoscopic finite-element (FE) mesh, three-phase composites of concrete namely aggregate, mortar matrix and interfacial transition zone (ITZ) are modeled. An equivalent probabilistic model is presented for failure study of concrete by assuming that the material properties conform to the Weibull distribution law. Meanwhile, the correlation coefficient introduced by the statistical method is incorporated into the Weibull distribution formula. Subsequently, a series of numerical analyses are used for investigating the influence of the correlation coefficient on tensile strength and the failure process of concrete based on the equivalent probabilistic model. Finally, as an engineering application, damage and failure behavior of concrete cracks induced by a water-cooling pipe are analyzed in-depth by the presented model. Results show that the random distribution of concrete mechanical parameters and the temperature gradient near water-cooling pipe have a significant influence on the pattern and failure progress of temperature-induced micro-cracking in concrete.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.36-46
• /
• 2004

The ISAAC fission product release calculation is based on detailed FPRAT models developed by Jaycor. For volatile fission product release calculations, either the Cubicciotti steam oxidation correlation or the NUREG-0772 correlation is used. In this study, evaluation is carried out for these volatile fission product release models. As a result, in the case of early release, the IDCOR model with an in-vessel Te release option shows the most conservative results and for the late release case, the NUREG-0772 model shows the most conservative results. Considering both early and late release, the IDCOR model with an in-vessel Te bound option is evaluated to show mitigated conservative results. In addition, a sensitivity study on detailed core nodalization is performed. In the study, 380 horizontal fuel channels in the Wolsong plant are nodalized into 12 (6 channels per loop, $3{\times}3$ Core Pass) representative channels and detailed by 16/20/24 channels. For reference accidents, LOAH and large LOCA are selected as representing high and low pressure sequences, respectively. According to the results, the original 12 channel approach with $3{\times}3$ core passes is evaluated to be sufficient as an optimal scheme.

• Water for future
• /
• v.17 no.2
• /
• pp.107-112
• /
• 1984

It si presented here that in order to estimate reservoir sedimentation rate through the use of reservoir survey data of 66 irrigation reservoir in 3 major watersheds in this country, the correlation between reservoir sedimentation rate and the following factors; watershed area, trap-efficiency, watershed slope, shape factor of water shed, and reservoir deposition age in two models simple regression model and multiple regression model. Appropriatness of the proposed models have been calibrated from the survey data and as a result, it has been determined that the multiple regression model is much more accurate than the simple regression model. The annual sediment yield is correlated with watershed area and reservoir trap efficiency. It has been found that variation of the annual average sedimentation rate and the annual reservoir capacity loss rate are influenced by the trap efficiency of reservoir.

• Water for future
• /
• v.14 no.4
• /
• pp.19-26
• /
• 1981

The auto-and cross-correlation function, power spectrum, coherence function and Markov model are applied to investigate the statistical characteristics of discharge and each factor of water quality and the interrelation-ship between the variation of discharge and water quality factors. The analysis of discharge, dissolved oxygen and electric conductivity, which were only obtainable data at the Indogyo gagining station in the downstream of the Han River, clearly showed that they hace distinct period of 12 months and three different periods of 6, 4 and 3 months weaker than the former. The cross-correlation between the discharge and water quality(DO, COND) is rather weak and the crosscorrelation function has its peak at lag one. It is considered therefrom that the variation of discharge behaves on water quality facotrs with one day's difference. In the examination of linear regression model for the serial generation and predictive measures, discharge series is fit to first and second order Markov model and DO, COND to first order Markov model.

• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.335-340
• /
• 2004

This study was conducted to evaluate the internal quality of Korean red ginseng using VIS/NIR transmittance spectra. To classify the internal qualities, partial least squares(PLS) regression was conducted. The main results are as follows: To develop the PLS model, several wave bands were divided and incorporated into the model. Among the bands, the wavelength range of 550-1,020nm, excluded noise signal, showed the best evaluation results. Effect of step size on the performance of quality evaluation showed optimal at 15 steps. In order to enhance the accuracy of quality evaluation, the abnormal spectrum shape was considered first and then the PLS model was applied. Among the 150 samples, 12 samples were evaluated by the spectrum shape. In this study, to develop the optimal PLS regression model, among the 150 samples, 138 samples was used with exception of 12 samples which could evaluate the spectrum shape. The result of quality evaluation was promising as SEC and correlation coefficient were 1.09 and 0.967, respectively, and SEP and correlation coefficient were 1.04 and 0.958, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.32-41
• /
• 1994

This paper presents the model-ship correlations based on model test results of 36 ships. All of model tests were conducted at KRISO towing tank The correlation factors $C_P,\;C_N,\;and\;C_{NP}$ are estimated by the ITTC Standard Method and compared with the results of another towing tank. In the 36 ships, the block coefficients of thirty ships are greater than 0.72. Nevertheless the comparison of factors is in good agreement. The corrections to the scale effect on wake fraction ${\Delta}{\omega}_c$ and roughness allowance $C_{Ac}$ are subject matter in practice. The correction formulae are proposed by functions of ship length and form factor. And the correction formula of resistance coefficient ${\Delta}C_{Fc}$ based on Townsis's hull roughness formula is presented.