• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.82-88
• /
• 2017

Recently recommendation methods need personalization and diversity as well as accuracy whereas the traditional researches have been mainly focused on the accuracy of recommendation in terms of quality. The diversity of recommendation is also important to people in terms of quantity in addition to quality since people's desire for content consumption have been stronger rapidly than past. In this paper, we pay attention to similarity of data gathered simultaneously among different types of contents. With this motivation, we propose an enhanced recommendation method using correlation analysis with considering data similarity between two types of contents which are movie and music. Specifically, we regard folksonomy tags for music as correlated data of genres for movie even though they are different attributes depend on their contents. That is, we make result of new recommendation movie items through mapping music folksonomy tags to movie genres in addition to the recommendation items from the typical collaborative filtering. We evaluate effectiveness of our method by experiments with real data set. As the result of experimentation, we found that the diversity of recommendation could be extended by considering data similarity between music contents and movie contents.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.1-8
• /
• 2016

PURPOSES : This study evaluates the reliability of the patterns of changes in the road surface temperature during winter using a statistical technique. In addition, a flexible road segmentation method is developed based on the collected road surface temperature data. METHODS : To collect and analyze the data, a thermal mapping system that could be attached to a survey vehicle along with various other sensors was employed. We first selected the test route based on the date and the weather and topographical conditions, since these factors affect the patterns of changes in the road surface temperature. Each route was surveyed a total of 10 times on a round-trip basis at the same times (5 AM to 6 AM). A correlation analysis was performed to identify whether the weather conditions reported for the survey dates were consistent with the actual conditions. In addition, we developed a method for dividing the road into sections based on the consecutive changes in the road surface temperature for use in future applications. Specifically, in this method, the road surface temperature data collected using the thermal mapping system was compared continuously with the average values for the various road sections, and the road was divided into sections based on the temperature. RESULTS : The results showed that the comparison of the reported and actual weather conditions and the standard deviation in the observed road surface temperatures could produce a good indicator of the reliability of the patterns of the changes in the road surface temperature. CONCLUSIONS : This research shows how road surface temperature data can be evaluated using a statistical technique. It also confirms that roads should be segmented based on the changes in the temperature and not using a uniform segmentation method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7182-7188
• /
• 2015

Recently, to improve manual mapping method, digital mapping using high-resolution camera and laser scanner has increasingly attracted attention and the relevant study is reportedly on the rise. In this study, laboratory and field test which are intended to quantitatively analyze and estimate the weathering degree which is one of the engineering characteristics of tunnel face using laser scanner that integrates high-solution imaging technique have been conducted. In a bid to analyze correlation between reflectance of laser scanner and weathering degree, investigation of the factors influencing on reflectance was carried out. And to minimize the effect on RGB value which is one the critical influential factors on reflectance, modification equation obtained from lab test was proposed. Modification equation proposed in this study was verified by comparing the values before and after correction using the data obtained by scanning. Consequently, weathering index estimated by modified reflectance appeared very similar with dominant weathering degree and weathering ratio monitored at the field.

• Human Ecology Research
• /
• v.55 no.6
• /
• pp.649-659
• /
• 2017

This study investigated the effect of a child care center directors' work stress and awareness of their servant leadership on burnout. The subjects of this study were 200 child care center directors in Incheon. They responded to 'Work Stress Scale', 'Maslach Burnout Inventory (MBI)', 'Servant Leadership Scale'. There were five subscales of Servant Leadership Scale (altruistic calling, emotional healing, wisdom, persuasive mapping, and organizational stewardship). Data were analyzed by frequency, percentage, mean, standard deviation, Pearson's correlation and hierarchical regression. Moderating effects were examined using analysis procedures of Baron and Kenny. The major results were as follows. First, child care center directors' burnout and work stress were positively correlated. Child care center directors' burnout and awareness of their servant leadership (emotional healing, wisdom, persuasive mapping, and organizational stewardship) was negatively correlated. Second, child care center directors' work stress, emotional healing, persuasive mapping and organizational stewardship affected their burnout. This means that the work stress of child care center directors increases their burnout. However, the child care center director's servant leadership is a factor in reducing burnout. Third, child care center directors' work stress and organizational stewardship had an interaction effect on burnout. The results suggests that child care center directors' organizational stewardship needs to be considered as an important factor for decreasing their own burnout. We also discussed implications and suggestions for future research and policy makers.

• Archives of Plastic Surgery
• /
• v.45 no.3
• /
• pp.284-288
• /
• 2018

Dynamic infrared thermography (DIRT) has been used for the preoperative mapping of cutaneous perforators. This technique has shown a positive correlation with intraoperative findings. Our aim was to evaluate the accuracy of perforator mapping with DIRT and augmented reality using a portable projector. For this purpose, three volunteers had both of their anterolateral thighs assessed for the presence and location of cutaneous perforators using DIRT. The obtained image of these "hotspots" was projected back onto the thigh and the presence of Doppler signals within a 10-cm diameter from the midpoint between the lateral patella and the anterior superior iliac spine was assessed using a handheld Doppler device. Hotspots were identified in all six anterolateral thighs and were successfully projected onto the skin. The median number of perforators identified within the area of interest was 5 (range, 3-8) and the median time needed to identify them was 3.5 minutes (range, 3.3-4.0 minutes). Every hotspot was correlated to a Doppler sound signal. In conclusion, augmented reality can be a reliable method for transferring the location of perforators identified by DIRT onto the thigh, facilitating its assessment and yielding a reliable map of potential perforators for flap raising.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.146-153
• /
• 2013

Objectives: Aluminum step wedge (ASW) equivalent radiodensity (eRD) has been used to quantify restorative material's radiodensity. The aim of this study was to evaluate the effects of image acquisition control (IAC) of a digital X-ray system on the radiodensity quantification under different exposure time settings. Materials and Methods: Three 1-mm thick restorative material samples with various opacities were prepared. Samples were radiographed alongside an ASW using one of three digital radiographic modes (linear mapping (L), nonlinear mapping (N), and nonlinear mapping and automatic exposure control activated (E)) under 3 exposure time settings (underexposure, normal-exposure, and overexposure). The ASW eRD of restorative materials, attenuation coefficients and contrasts of ASW, and the correlation coefficient of linear relationship between logarithms of gray-scale value and thicknesses of ASW were compared under 9 conditions. Results: The ASW eRD measurements of restorative materials by three digital radiographic modes were statistically different (p = 0.049) but clinically similar. The relationship between logarithms of background corrected grey scale value and thickness of ASW was highly linear but attenuation coefficients and contrasts varied significantly among 3 radiographic modes. Varying exposure times did not affect ASW eRD significantly. Conclusions: Even though different digital radiographic modes induced large variation on attenuation of coefficient and contrast of ASW, E mode improved diagnostic quality of the image significantly under the underexposure condition by improving contrasts, while maintaining ASW eRDs of restorative materials similar. Under the condition of this study, underexposure time may be acceptable clinically with digital X-ray system using automatic gain control that reduces radiation exposure for patient.

• Korean Journal of Remote Sensing
• /
• v.20 no.6
• /
• pp.369-382
• /
• 2004

The purpose of this study is the investigation of applicability of LSMA(Linear Spectral Mixture Analysis) on the geological uses with different radiometric and spatial types of sensor images such as Terra ASTER and LANDSAT 7 ETM+. As for the actual application case, geologic mapping for mineral exploration using ASTER and ETM+ at the Mongolian plateau region was carried out. After the pre-processing such as the geometric corrections and calibration of radiance, 7 endmembers, as spectral classes for geologic rock types, related to spectral signature deviation for the given application was determined by the pre-surveyed geological mapping information and the correlation matrix analysis, and total 20 images of ASTER and ETM+ were used to LSMA processing. As the results, fraction maps showing individual mineral types in the study area are presented. It concluded that this approach based on LSMA using ETM+ and ASTER is regarded as one of the effective schemes for geologic remote sensing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.443-449
• /
• 2018

Acquiring indoor point cloud, using SLAM (Simultaneous Localization and Mapping) based mobile mapping system, is an element progress for development of as-build BIM (Building Information Model) for the maintenance of the building. In this research we proposed a simulation-based target geometry determination for extrinsic calibration of multiple 2D laser scanning mobile system. Four different types of calibration sites were designed: (1) circle type; (2) rectangle type; (3) double circle type; and (4) double rectangle type. Based on the measurement values obtained from each simulated calibration site geometry, least squares solution based extrinsic calibration was derived. As a result, the rectangle type geometry is most suitable for extrinsic calibration of this system. Also, correlation values between extrinsic calibration parameters were high, and calibration results were distinct according to the calibration sites.

• Atmosphere
• /
• v.31 no.5
• /
• pp.637-656
• /
• 2021

The United States has been known as the world's major producer of crops such as wheat, corn, and soybeans. Therefore, using meteorological long-term forecast data to project reliable crop yields in the United States is important for planning domestic food policies. The current study is part of an effort to improve the seasonal predictability of regional-scale precipitation across the United States for estimating crop production in the country. For the purpose, a dynamic downscaling method using Weather Research and Forecasting (WRF) model is utilized. The WRF simulation covers the crop-growing period (March to October) during 2000-2020. The initial and lateral boundary conditions of WRF are derived from the Pusan National University Coupled General Circulation Model (PNU CGCM), a participant model of Asia-Pacific Economic Cooperation Climate Center (APCC) Long-Term Multi-Model Ensemble Prediction System. For bias correction of downscaled daily precipitation, empirical quantile mapping (EQM) is applied. The downscaled data set without and with correction are called WRF_UC and WRF_C, respectively. In terms of mean precipitation, the EQM effectively reduces the wet biases over most of the United States and improves the spatial correlation coefficient with observation. The daily precipitation of WRF_C shows the better performance in terms of frequency and extreme precipitation intensity compared to WRF_UC. In addition, WRF_C shows a more reasonable performance in predicting drought frequency according to intensity than WRF_UC.

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.249-264
• /
• 2011

A multi-Gaussian kriging approach extended to space-time domain is presented for uncertainty modeling as well as time-series mapping of environmental variables. Within a multi-Gaussian framework, normal score transformed environmental variables are first decomposed into deterministic trend and stochastic residual components. After local temporal trend models are constructed, the parameters of the models are estimated and interpolated in space. Space-time correlation structures of stationary residual components are quantified using a product-sum space-time variogram model. The ccdf is modeled at all grid locations using this space-time variogram model and space-time kriging. Finally, e-type estimates and conditional variances are computed from the ccdf models for spatial mapping and uncertainty analysis, respectively. The proposed approach is illustrated through a case of time-series Particulate Matter 10 ($PM_{10}$) concentration mapping in Incheon Metropolitan city using monthly $PM_{10}$ concentrations at 13 stations for 3 years. It is shown that the proposed approach would generate reliable time-series $PM_{10}$ concentration maps with less mean bias and better prediction capability, compared to conventional spatial-only ordinary kriging. It is also demonstrated that the conditional variances and the probability exceeding a certain thresholding value would be useful information sources for interpretation.