• 한국환경과학회지
• /
• 제2권3호
• /
• pp.207-216
• /
• 1993

The concentrations of $SO_2$ and $SO_3$ were measured to estimate a new developed long time exposure $SO_2$ sampler at Onsan industrial area considering the meteorological factors from June to October, 1992. The mean concentration of $SO_3$ by $PbO_2$ method was 0.924 mg $SO_3 / 10cm^2$ $PbO_2$/day and their high values were shown in the center of the industrial area, which show potential pollution due to the increase of industrial activities and micrometeorological factors in and around the sites. As a result of statistical correlation between $SO_2$ concentration by new sampling method and $SO_3$ concentration by $PbO_2$ method in July and August, 1992, correlation coefficients were high (r=0.87, 0.91) and shown more than 0.83 value in the high concentration data set, which was arbitrarily divided into 7~10${\mu}l$$SO_2$ concentration in an attempt to further investigate these relationships. Therefore, use of new developed long time exposure TEX>$SO_2$ sampler is good for TEX>$SO_2$ measurement and valuable for estimation of air quality in the urban and industrial area. Key Words : a new developed long time exposure TEX>$SO_2$ sampler, correlation coefficients, high, $SO_2$ measurement, estimation of air Quality.

• 한국통신학회논문지
• /
• 제38C권4호
• /
• pp.359-364
• /
• 2013

본 논문에서는 선박 접안 유도 시스템 등 정밀한 거리 추정을 요하는 안전항해운항, 선박트래픽관리 등의 분야에 알맞은 상관값 누적 기반 직접 수열 초광대역 (direct sequence ultra wideband: DS-UWB) 레이더 시스템을 제안한다. 제안하는 DS-UWB 레이더 시스템은 상관기 출력들을 누적하여 잡음을 평균냄으로써 잡음 성분의 영향을 줄이며, 기존의 DS-UWB 레이더 시스템들에 비해 더 빠른 시간에 신뢰성 있는 거리 추정을 수행한다. 모의실험 결과를 통해 제안하는 DS-UWB 레이더 시스템이 기존의 DS-UWB 레이더 시스템들에 비해 평균 상관 처리 시간이 더 짧을 뿐 아니라, 더 좋은 거리 추정 성능을 보임을 확인한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.113-116
• /
• 1994

Estimation of the evoked potential using the iterated bispectrum and cross-correlation (IBC) has been tried for both simulation and real clinical data. Conventional time average (TA) method suffers from synchronization error when the latency time of the evoked potential is random, which results in poor SNR distortion in the estimation of EP waveform. Instead of EP signal average in time domain, bispectrum is used which is insensitive to time delay. The EP signal is recovered by the inverse transform of the Fourier amplitude and phase obtained from the bispectrum. The distribution of the latency time is calculated using cross-correlation between EP signal estimated by the bispectrum and the acquired signal. For the simulation. EEG noise was added to the known EP signal and the EP signal was estimated by both the conventional technique and bispectrum technique. The proposed bispectrum technique estimates EP signal more accurately than the conventional technique with respect to the maximum amplitude of a signal, full width at half maximum(FWHM). signal-to-noise-ratio, and the position of maximum peak. When applied to the real visual evoked potential(VEP) signal. bispectrum technique was able to estimate EP signal more distinctively. The distribution of the latency time may play an important role in medical diagonosis.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.541-549
• /
• 2021

This paper reports a method to evaluate the residual strength of insect-damaged radiata pine lumber, such as the screw withdrawal strength as a semi-destructive method and a compression parallel to the grain test to assess the density changes after exposure to outdoor conditions. The screw withdrawal strength test was used as a semi-destructive method to estimate the residual density of decayed lumber. A compression parallel to the grain test was applied to evaluate the residual density. Three variables, such as the screw withdrawal strength, compression parallel to the grain, and residual density, were analyzed statistically to evaluate their relationships. The relationship between the residual density and screw withdrawal strength showed a good correlation, in which the screw withdrawal strength decreased with decreasing density. The other relationship between the residual density and compression parallel to the grain was also positively correlated; the compression parallel to the grain strength decreased with decreasing density. Finally, the correlation between the three variables was statistically significant, and the mutual correlation coefficients showed a strong correlation between the three variables. Hence, these variables are closely correlated. The test results showed that the screw withdrawal strength could be used as a semi-destructive method for an in situ estimation of an existing wood structure. Moreover, the method might approximate the residual density and compression parallel to the grain if supplemented with additional data.

• 한국음향학회지
• /
• 제43권4호
• /
• pp.406-413
• /
• 2024

본 논문은 임펄스성 잡음에 견실한 시간 지연을 추정 방법을 제안한다. 제안하는 방법은 Generalized Cross Correlation - Phase Transform(GCC-PHAT) 방법에 비선형 전처리와 주파수 영역 저역 통과 필터를 사용한다. 본 논문에서는 GCC-PHAT의 연산 과정을 DFT로 다시 해석함으로써 GCC-PHAT에서 시간 지연 추정에 실제 사용되는 유효한 주파수 대역이 있음을 파악하고, 저역 통과 필터 사용하여 유효 대역만을 사용하면 잡음 성분을 줄여서 시간 추정 성능을 향상시킬 수 있음을 보인다. 제안한 방법을 임펄스성 잡음 환경에서 전통적인 GCC-PHAT와 비교함으로써 추정 견실성이 향상됨을 보인다.

• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.347-354
• /
• 1991

In this paper, the Automatic Tracking Window(ATW) algorithm is applied to the Generalized Cross-Correlation(GCC) time delay estimation algorithm as a preprocessing. The Linear Prediction(LP) algorithm, which is a pararmetric spectral estimation algorithm, is applied to the time delay estimation. And the ATW, a preprocessing algorithm is applied to this algorithm too. This paper shows that the ATW algorithm attenuates the sidelobes very much and improves the resolution of the timedelay estimation.

• 한국음향학회지
• /
• 제37권5호
• /
• pp.271-275
• /
• 2018

두 개 센서에 도래하는 신호 간의 시간 지연을 추정 방법에는 여러 가지가 존재한다. 그중에서 두 센서에 입력되는 서로 다른 신호간의 상호 상관과 신호 백색화로부터 상대적인 지연을 추정하는 GCC-PHAT(Generalized Cross Correlation-Phase Transform) 방법은 안정적인 성능을 내는 전통적으로 유명한 방법이다. 본 논문에서는 GCC-PHAT의 연산 과정 중에서 주기성을 이용하여 잡음을 제거할 수 있는 부분을 파악하였다. 그리고 파악된 부분에 자기상관을 적용하였다. 제안한 방법을 기존의 방법과 비교하여, 백색 가우시안 신호원인 경우 신호 대 잡음비 0 dB 이상에서 평균 자승 추정 오차 5 dB ~ 15 dB까지의 향상이 있음을 보이고, 유색 신호원에서도 신호 대 잡음비 2 dB 이상에서 평균 자승 추정 오차가 성능 개선되어 15 dB까지의 성능 개선 효과가 있음을 보인다.

• 한국음향학회지
• /
• 제37권6호
• /
• pp.499-505
• /
• 2018

서로 떨어져 설치된 두 개의 음향 센서에 도달하는 신호의 상호 지연 시간을 추정하는 것은 실내 음향과 소나 등에서 목표물 위치 추정 문제나 추적 및 동기화에 이르기까지 다방면에서 쓰이고 있다. 시간 지연을 구하는 방법에서는 두 수신 신호 사이의 상호 상관을 이용한 방법이 대표적이다. 그러나 이 방법은 수신 음향 센서에 잡음이 부과 되는 것에 충분한 고려가 없었다. 본 논문은 수신 음향 센서에 모두 잡음이 부과된 경우를 고려한 새로운 시간 지연 추정 방법을 제안한다. 기존의 일반 상호 상관법과 적응 고유치 분석법과 비교를 통해서 새로 제안한 알고리즘이 유색 신호에 부가된 가우시안 잡음환경에서 우수성이 있음을 확인한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.131-135
• /
• 1995

As the search range increases, most fast ME algorithms can not keep the performance comparable to the full search BMA. In this paper, we propose a new fast motion estimation method which locates the small search area for a block of the current frame. This method is based on interframe correlation of motion vectors as well as intraframe correlation. Especially, the proposed algorithm outperforms other fast methods when the motion is very fast or complex. It drastically reduces computational complexity while maintaining good performance compared with the conventional FS-BMA.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.767-772
• /
• 1998

schumidt hammer and ultra-sonic method are commonly used for concrete compressive strength test in a construction field. At present, various kinds of equations for estimation of strength are present, which have been used in a construction field. The purpose of this study is to evaluate the correlation between estimation strength by presentation equations and destructive strength to test specimen, and find out which is a suitable equation for this construction site. In this study, a strength test was carried out destructive test by means of core sampling. Non destructive test was conducted Schumidt hammer and ultra-sonic method, the experimental parameter were concrete age, test method and strength level. It is demonstrated that the correlation behavior of concrete strength in this study good due to the performs analysis of correlation between core strength and nondestructive strength.