• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.274-281
• /
• 2007

In this paper, we present a hybrid multi-antenna technique that can minimize the outage probability by combining the diversity and beamforming techniques. The hybrid technique clusters the transmission antennas into multiple groups and exploit diversity among different groups and beamforming within each group. We analyze the performance of the resulting hybrid technique for an arbitrary correlation among the transmission antennas. Through the performance analysis, we derive a closed-form expression of the outage probability for the hybrid technique. This enables to optimize the antenna grouping for the given spatial correlation. We show through numerical results that the hybrid technique can balance the trade-offs between diversity and beamforming according to the spatial correlation and that the optimally designed hybrid technique yields a much lower outage probability than the diversity or beamforming technique does in partially correlated fading channels.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1628-1635
• /
• 2006

A new frequency-modulated m-sequence correlation technique was described. It has. been seen that the frequency modulation scheme leads to higher signal-to-noise ratio than direct sequencing and less hardware effort than PSK modulation scheme. The operating frequency of the correlation system was deduced. The optimal frequency for the frequency-modulated m-sequence correlation system should be 1.35 times of the center frequency of the transducer. The application of this correlation technique to electromagnetic ultrasonic system was computer-simulated.

• 한국음향학회지
• /
• 제20권2호
• /
• pp.86-92
• /
• 2001

소음원 위치와 방위를 규명하기 위해 다양한 배열처리기술이 발전되어 왔다. 배열처리기술의 기본은 두 개의 수신센서에 수신된 신호의 시간차를 이용하여 소음원의 위치와 방위를 구하는 것으로 응용분야나 신호처리방법에 따라 고유의 특성을 갖는 빔형성기법, 상관함수기법 및 NAH (Near-Field Acoustic Holography) 등이 있다 본 연구에서는 이러한 기법들 중 광대역 소음원 탐지에 적용되는 상관함수기법을 채택하여 소음원의 대역폭과 측정 잡음원 간의 상관 관계가 위치나 방위 탐지 정확도에 미치는 영향을 분석하여 효과적인 소음원 탐지기법을 제안한다. 본 연구에서 채택한 배열의 기하학적 형상은 위치나 방위의 3차원적 모호성을 없애기 위한 3차원 비선형이며 제안된 기법의 타당성은 수치모의 실험 및 실제 실험으로 검증되었다.

• Structural Engineering and Mechanics
• /
• 제87권5호
• /
• pp.419-429
• /
• 2023

This study conducts numerical analyses of a thin-walled composite cylinder under axial compression and internal pressure of 10 kPa. Numerical vibration correlation technique and nonlinear postbuckling analyses are conducted using the nonlinear finite element analysis program, ABAQUS. The single perturbation load approach and measured imperfection data are used to represent the geometric initial imperfection of thin-walled composite cylinder. The buckling knockdown factors are derived using present initial imperfection and analysis methods under axial compression without and with the internal pressure. Furthermore, the buckling knockdown factors are compared with the buckling test and computation time are calculated. In this study, derived buckling knockdown factors in present study have difference within 10% as compared with the buckling test. It is shown that nonlinear postbuckling analysis can derive relatively accurate buckling knockdown factor of present thin-walled cylinders, however, numerical vibration correlation technique derives reasonable buckling knockdown factors compared with buckling test. Therefore, this study shows that numerical vibration correlation technique can also be considered as an effective numerical method with 21~91% reduced computation time than nonlinear postbuckling analysis for the derivation of buckling knockdown factors of present composite cylinders.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.210-214
• /
• 1993

There are two general techniques to observe particle movements in fluid. One is the acoustic time domain correlation technique and another is the frequency domain Doppler-shift techniques. Both techniques were reviewed and mentioned their some merits and demerits in ocean wave and current observation. Some possible application of acoustic time domain correlation technique in ocean wind wave measurement was discussed.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.33-37
• /
• 2010

The joint transform correlator (JTC) has been the best known technique for pattern recognition and identification. The JTC optically compares the reference image with the sample image then examines match or non-match by acquiring a correlation peak. However, the JTC technique has some problems such as weak correlation discrimination and noise which originates from the interference fringes in the Fourier transform plane. In order to solve these problems, this paper proposes a new technique of modifications of the interference fringes by adopting special iterative filters. Experimental results are presented to show that the proposed technique can successfully improve the correlation peaks and the level of discrimination.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.280-295
• /
• 2015

Block cipher ARIA was first proposed by some South Korean experts in 2003, and later, it was established as a Korean Standard block cipher algorithm by Korean Agency for Technology and Standards. In this paper, we focus on the security evaluation of ARIA block cipher against the recent zero-correlation linear cryptanalysis. In addition, Partial-sum technique and FFT (Fast Fourier Transform) technique are used to speed up the cryptanalysis, respectively. We first introduce some 4-round linear approximations of ARIA with zero-correlation, and then present some key-recovery attacks on 6/7-round ARIA-128/256 with the Partial-sum technique and FFT technique. The key-recovery attack with Partial-sum technique on 6-round ARIA-128 needs $2^{123.6}$ known plaintexts (KPs), $2^{121}$ encryptions and $2^{90.3}$ bytes memory, and the attack with FFT technique requires $2^{124.1}$ KPs, $2^{121.5}$ encryptions and $2^{90.3}$ bytes memory. Moreover, applying Partial-sum technique, we can attack 7-round ARIA-256 with $2^{124.6}$ KPs, $2^{203.5}$ encryptions and $2^{152}$ bytes memory and 7-round ARIA-256 employing FFT technique, requires $2^{124.7}$ KPs, $2^{209.5}$ encryptions and $2^{152}$ bytes memory. Our results are the first zero-correlation linear cryptanalysis results on ARIA.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.425-430
• /
• 1995

핵자기 공명 뇌기능 영상에서 상관관계를 이용한 데이터 해석기법이 많이 사용되고 있다. 이 논문에서 새롭게 제안된 CLT 기법은 상관관계(CCT)를 이용한 기법을 변화시켜서, 이 CCT기법의 단점을 보완하고자 하였다. CLT기법은 다음의 두 단계로 이루어진다. 첫째, 잡음을 포함한 CCT기법의 상관계수결과로 부터 잡음은 제거하고 실제 자극반응 픽셀들은 추출한다. 둘째, 이산적인 분포를 가지는 반응 픽셀들을 두 가지의 선별법으로 군집을 이루도록 한다. 이 CLT기법을 이용해서 실제 자극에 반응하는 픽셀들은 서로 모이게 하였고, 잡음에 기인한 오류의 픽셀들은 제거 되어질 수 있었다. 본 논문에서 제안된 CLT기법은 기존의 다른 기법에 비해 여러 잇점이 있고, 특히 잡음에 강한 특성이 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2006-2009
• /
• 2005

This paper presents a method for registering images using phase correlation technique in fourier domain, hough transform and multi-resolution wavelet. To register images, source and input images are transformed to wavelet domain. An angular transition can be obtained by applying hough transform technique followed by phase correlation. Then we apply phase correlation technique to find x-axis and y-axis transition. We apply wavelet transform to reduce processing time and also use its coefficients as edge information instead of canny detector. With multi-resolution property of wavelet transform, registration time can be greatly reduced. After we get all transition parameters, we transform the input images according to these parameters. Then, we compose and blend all images into a new large image with details of all source images. From our experiment, we can find the accurate transition both x-y translation and angular transition with less error.