• Journal of Labour Economics
• /
• v.34 no.3
• /
• pp.81-117
• /
• 2011

This study examined how firms responded to the articles regarding the prohibition or correction of discrimination against fixed-term workers in the 'fixed-term worker protection law', which has been effective since July of 2007 in Korea. Data used cone from the Korean Workplace Survey, and a difference-in-differences method was employed for the identification of the causal effect, noting that the 'discrimination prohibition law' has been applied to firms over stages based on their sizes. The empirical results show no strong evidence that the law played a positive role in reducing differentials between permanent workers and fixed-term workers in the areas of wage and various employee benefits, including the provision of severance pay, annual leave, and 4 major social insurances for fixed-term workers. A more thorough future analysis on the causes of the insignificant impact of the law in some employee welfare benefits, along with supplemental policies, is needed to have the law achieve the desired goal of removing discrimination at the workplace.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.4
• /
• pp.249-255
• /
• 2014

We present a simple method to watermark three-dimensional (3D) triangular meshes that have been generated from the depth data of the Kinect sensor. In contrast to previous methods, which maintain the shape of 3D triangular meshes and decide the embedding place, requiring calculations of vertices and their neighbors, our method is based on selecting one of the coordinate axes. To maintain shape, we use discrete wavelet transform and constant regularization. We know that the watermarking system needs the information to be embedded; we used a text to provide that information. We used geometry attacks such as rotation, scales, and translation, to test the performance of this watermarking system. Performance parameters in this paper include the vertices error rate (VER) and bit error rate (BER). The results from the VER and BER indicate that using a correction term before the extraction process makes our system robust to geometry attacks.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1068-1074
• /
• 2013

This paper proposes an additional forward error correction (FEC) layer to compensate for the defectiveness inherent in the conventional FEC layer in the Long Term Evolution specifications. The proposed additional layer is called a graceful degradation (GD)-FEC layer and maintains desirable service quality even under burst data loss conditions of a few seconds. This paper also proposes a non-delayed decoding (NDD)-GD-FEC layer that is inherent in the decoding process. Computer simulations and device-based tests show a better loss recovery performance with a negligible increase in CPU utilization and occupied memory size.

• Journal of The Korean Astronomical Society
• /
• v.49 no.6
• /
• pp.289-293
• /
• 2016

We investigate the long-term spatial drift of the center and the temporal variation of the shutter delay time map of Y4KCam mounted on the CTIO 1.0 m telescope. We have collected shutter delay time maps over eight years as a part of our long-term survey program. We find that the center of the shutter delay time map can drift up to $450{\mu}m$, equivalent to ${\approx}30pixels$, on the CCD. This effect can result in a small amount of error in integration time without the proper shutter delay time correction, but it does not appear to cause any significant problems in photometric measurements. We obtain a mean shutter delay time of $69.1{\pm}0.8$ ms and find no temporal variation of the shutter delay time of Y4KCam over eight years, indicative of the mechanical stability of the shutter. We suggest that using a master shutter delay time correction frame would be sufficient to achieve high precision photometry, which does not exceed photometric errors ${\approx}1.7mmag$ across the CCD frame for exposure times longer than 1 s.

• Ocean and Polar Research
• /
• v.40 no.1
• /
• pp.49-58
• /
• 2018

This study aimed to analyze the causality of hairtail prices among import and domestic distribution channels using a Vector Error Correction Model(VECM). The results are as follows. First, since the ADF unit-root test suggests that each of the price variables, apart from retail price, has a unit root, the price variables should be 1st-differenced to secure the stability of the prices. Next, through the Johansen co-integration test, it was discovered that there are long-term relationships among the price variables. On the basis of the co-integration test, VECM analysis shows that the producer price has a long-run balance with the import and wholesale prices. In particular, when the prices deviate from the balance, the producer price dynamically adjusts to return to the long-term relationship among prices. It also indicates that the producer price has an impact on the import, wholesale, and retail prices in the short-term, and the import price has an influence on the producer and wholesale prices. In addition, the impulse response analysis demonstrates that the impulse of import and producer prices has a lasting impact on each of the prices.

• Journal of Chest Surgery
• /
• v.45 no.5
• /
• pp.308-315
• /
• 2012

Background: Long-term surveillance comparing satisfaction between the early experience of Nuss procedure vs. Ravitch procedure. Materials and Methods: A total of 100 patients that underwent surgical correction of a pectus excavatum between 2001 and 2004 and were followed for ${\geq}2$ years were included. Surveillance on the degree of satisfaction was performed using five-levels of the Likert scale and self-assessment scoring. Results: Nuss or Ravitch surgery was performed in 63 and 37 patients, respectively. The Nuss procedure required a shorter operation time and shorter hospital stay than the Ravitch procedure (p<0.001). The surveillance demonstrated that 17.6% of the Nuss group and 35.7% of the Ravitch group were not satisfied with the outcome of the surgery (p=0.072). The most common causes of dissatisfaction were redepression in the Nuss group (n=5) and incomplete correction in the Ravitch group (n=7). The multivariate analysis showed that reoperation and a high postoperative pectus index were significant risk factors for a low satisfaction score. Conclusion: The Nuss procedure had several advantages over the Ravitch procedure in the immediate postoperative period. However, the long-term satisfaction was determined by a complete correction without recurrence or need for re-intervention rather than by the operation type.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.174-182
• /
• 2009

Purpose: The Mulliken's method is a one of the very excellent technique to correction of the unilateral cleft lip. It could decrease the need of additional operation and second operation by the early simultaneous correction of unilateral cleft lip and nasal deformity, at a time. Numerous procedures were advocated for the correction of nasal deformity, but with general dissatisfaction of the results, it became obvious that no one procedure is the ideal one. The authors have been operating on unilateral cleft lip by Mulliken's method and long term follow - up of postoperative result was evaluated. Methods: The authors have done long term follow - up of result in the 75 cases unilateral cleft lip patient, during 1 ~ 7 years. That was repaired by simultaneous correction of cleft lip and nasal deformity by Mulliken's method at the period from June, 1997 to December, 2007. The patients were unilateral complete cleft lip 39 cases, unilateral incomplete cleft lip 36 cases. In the severe complete cleft lip cases, lip adhesion operation was done before definite operation. The mean age of unilateral cleft lip operation was 3.2 months. Five anthropometric parameters, which were upper lip, cutaneous lip and vermilion mucosa height, nasal tip protrusion, columella length were measured by Sliding Vernier Caliper. The anthropometric analysis was performed preoperative and postoperative at 6 months, 3, 5 and 7 years and the results were com pared with those of age - matched, normal children. T - tests were used to analyze the differences between the measurements. Results: Long - term postoperative results were evaluated by anthropometrically. Most patients showed adequate growth of upper lip height, vermilion mucosa height and columella length. But nasal tip protrusion was relatively short compare with normal value. Incomplete cleft lip group was nearly normal growth results than complete cleft lip group. Conclusion: In conclusion, we could make harmonious Cupid's bow, natural philtrum and lip, appropriate nasal shape by Mulliken's method. But nasal tip protrusion was under the normal values on complete and incomplete group. And incomplete group was more good results than complete group. We have experienced repair of cleft lip by Mulliken's method with 75 cases of unilateral cleft lip patients and conclude that it was very useful and good method.

• Physical Therapy Korea
• /
• v.30 no.3
• /
• pp.174-183
• /
• 2023

Background: Office workers experience neck or back pain due to poor posture, such as flexed head and forward head posture, during long-term sedentary work. Posture correction is used to reduce pain caused by poor posture and ensures proper alignment of the body. Several assistive devices have been developed to assist in maintaining an ideal posture; however, there are limitations in practical use due to vast size, unproven long-term effects or inconsistency of maintaining posture alignment. We developed a headphone and necklace posture correction system (HANPCS) for posture correction using an inertial measurement unit (IMU) sensor that provides visual or auditory feedback. Objects: To demonstrate the test-retest reliability and concurrent validity of neck and upper trunk flexion measurements using a HANPCS, compared with a three-dimensional motion analysis system (3DMAS). Methods: Twenty-nine participants were included in this study. The HANPCS was applied to each participant. The angle for each action was measured simultaneously using the HANPCS and 3DMAS. The data were analyzed using the intraclass correlation coefficient (ICC) = [3,3] with 95% confidence intervals (CIs). Results: The angular measurements of the HANPCS for neck and upper trunk flexions showed high intra- (ICC = 0.954-0.971) and inter-day (ICC = 0.865-0.937) values, standard error of measurement (SEM) values (1.05°-2.04°), and minimal detectable change (MDC) values (2.92°-5.65°). Also, the angular measurements between the HANPCS and 3DMAS had excellent ICC values (> 0.90) for all sessions, which indicates high concurrent validity. Conclusion: Our study demonstrates that the HANPCS is as accurate in measuring angle as the gold standard, 3DMAS. Therefore, the HANPCS is reliable and valid because of its angular measurement reliability and validity.

• Korea Trade Review
• /
• v.43 no.5
• /
• pp.159-177
• /
• 2018

The container shipping sector is an important international logistics operation that connects open economies. Freight rates rapidly change as the market fluctuates, and staff related to the shipping market are interested in factors that determine freight rates in the container market. This study uses the Vector Error Correction Model(VECM) to estimate the impact of factors affecting container freight rates. This study uses data published by Clarksons. The analysis results show a 4.2% increase in freight rates when world container traffic increases at 1.0%, a 4.0% decrease in freight rates when volume of container carriers increases by 1.0%, a 0.07% increase in freight rates when bunker price increases by 1.0%, and a 0.04% increase in freight rates accompanying 1.0% increase in libor interests rates. In addition, if the current freight rate is 1.0% higher than the long-term equilibrium rate, the freight rate will be reduced by 3.2% in the subsequent term. In addition, if the current freight rate is 1.0% lower than the long-term equilibrium rate, the freight rate will decrease by 0.12% in the following term. However, the adjusting power in a period of recession is not statistically significant which means that the pressure of freight rate increase in this case is neglectable. This research is expected to contribute to the utilization of scientific methods in forecasting container freight rates.