• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.1
• /
• pp.25-30
• /
• 2014

Differential Global Positioning System-Correction Projection (DGPS-CP) algorithm, which has been suggested as a method of correcting pre-calculated position error by projecting range-domain correction to positional domain, is a method to improve the accuracy performance of a low price GPS receiver to 1 to 3 m, which is equivalent to that of DGPS, just by using a software program without changing the hardware. However, when DGPS-CP algorithm is actually realized, the error is not completely eliminated in a case where a reference station does not provide correction of some satellites among the visible satellites used in user positioning. In this study, the problem of decreased performance due to the difference in visible satellites between a user and a reference station was solved by applying the Multifunctional Transport Satellites (MTSAT) based Augmentation System (MASA) correction to DGPS-CP, instead of local DGPS correction, by using the Satellite Based Augmentation System (SBAS) operated in Japan. The experimental results showed that the accuracy was improved by 25 cm in the horizontal root mean square (RMS) and by 20 cm in the vertical RMS in comparison to that of the conventional DGPS-CP.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.1023-1029
• /
• 2011

In the industrial vision systems, image correction has great influence on the overall performance of measurement or inspection. The overall area of distorted image is usually splitted into small control areas, and each area is corrected by its control points. The performance of correction methods using control points can be improved by reduction of control areas because the computational time and memory highly depend on the number of control areas. We develop a merging algorithm that reduces control areas and preserves the correction accuracy. The algorithm merges the splitted control areas by use of quad tree method. Experimental results are presented to verify the usefulness of the proposed method.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.39-42
• /
• 2010

This Study describes the mountainous area which is located in Gyeongsangbuk-do and Jeollanam-do used the relative gravimeter in the object and is measured and the gravity data which used orthometric correction, is a physical height the altitude in compliance with the level measurement which is an altitude and a geometric height is really a difference in compliance with the method which is various calculated orthometric height. In addition, calculated by various were compared & analyzed by orthometric correction against the objective area to determine the appropriate orthometric correction method of calculation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.42-50
• /
• 2005

In this paper, a novel method is proposed how the ECC(Error Correction Code) in server system can be investigated and the robustness of each system against noisy environment and element failure in memory module has been verified. Chipset manufacturers have hided the algorithm of their Hamming code and the user has difficulty in verification of the robustness of each system. The proposed method is very simple, but the outputs of the experiment explain the core ability of error correction in server system and helps the detection of the failure element. On the basis of these results, we could expect the robustness of digitalized weapon system and the efficient design of our own error correction code.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.549-551
• /
• 2003

Satellite images are utilized for various purposes and many people are concerned about them. But it is necessary to process geometric correction for using of satellite images. However, common user regards geometric correction, which is basic preprocessing for satellite image, as laborious job. Therefore we should provide an automatic geometric correction method for Landsat image using GCP chip database. The GCP chip database is the collection of pieces of images with geoinformation and is provided by XML web service. More specifically, XML web service enables common users to easily use our GCP chip database for their own geometric correcting applications.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2010

Ionization chambers often exhibit a stem effect, caused by interactions of radiation with air near the chamber end, or with dielectric in the chamber stem or cable. In this study measured stem effect correction factor for length of ionization chamber from medical linear accelerator recommend to with the use of stem correction method. For a model of the Farmer-type chamber, were used to calculate the beam quality correction factor. These interactions contribute to the apparent measured exposure. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field. Linear accelerator generated photons energy and increased dose repeatedly measured by using stem correction method. Stem effect was dependence of the energy and increases with photon energy conditions improved of beam quality. In conclusion, stem effect correction factor was measured within 0.4% calculated according to the exposures stem length and also supposed to determined below 1% of another stem correction method.

• Journal of Korean Foot and Ankle Society
• /
• v.14 no.1
• /
• pp.21-24
• /
• 2010

Purpose: The incomplete reduction of the sesamoid has lately been issued as cause for recurrence. In this study, we analysed factors that may influence reduction of sesamoid. Materials and Methods: The study consists of 50 cases operated by single surgeon. Eighteen cases were done by proximal chevron osteotomy, and 32 cases were done by scarf osteotomy. Hallux valgus (HV) angle and intermetatarsal (IM) angle were measured before and three months after the surgery. Sesamoid position (SP) was classified according to Hardy and Clapham grade system. Results: After the proximal chevron osteotomy, the correction of the mean HV angle was $19.5^{\circ}$, and IM angle was $6.2^{\circ}$. SP was changed from 5.6 to 3.4 grade. After the Scarf osteotomy, the correction of the mean HV angle was 25 degree, and IM angle was $9^{\circ}$. SP was changed from 5.5 to 2.8 grade. There was difference of sesamoid's correction between two different method of surgery (p=0.127). However, better correction of sesamoid was witnessed with bigger correction angle regardless of method of surgery (p=0.002, 0.001). Conclusion: We believe surgical method do not effect sesamoid's correction but more correction angle can result in better correction of sesamoid position.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.500-508
• /
• 2020

The rifling angle of artillery is an important parameter, and its determination plays a key role in the stability, hit rate, accuracy and service life of artillery. In this study, we propose an optical measurement method for the rifling angle based on angle error correction. The method is based on the principle of geometrical optics imaging, where the rifling on the inner wall of the artillery barrel is imaged on a CCD camera target surface by an optical system. When the measurement system moves in the barrel, the rifling image rotates accordingly. According to the relationship between the rotation angle of the rifling image and the travel distance of the measurement system, different types of rifling equations are established. Solving equations of the rifling angle are deduced according to the definition of the rifling angle. Furthermore, we added an angle error correction function to the method that is based on the theory of dynamic optics. This function can measure and correct the angle error caused by the posture change of the measurement system. Thus, the rifling angle measurement accuracy is effectively improved. Finally, we simulated and analyzed the influence of parameter changes of the measurement system on rifling angle measurement accuracy. The simulation results show that the rifling angle measurement method has high measurement accuracy, and the method can be applied to different types of rifling angle measurements. The method provides the theoretical basis for the development of a high-precision rifling measurement system in the future.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.307-310
• /
• 2008

Nonlinear Vortex Strength Correction Method is developed for improvement of vortex lattice method which can't calculate the separated flow conditions and the viscous effect. In this method, the vortex strength on the blade surface is determined by matching the lift force from vortex lattice method with the lift force from aerodynamic coefficients table as the same circulation is added to or subtracted from all chord wise vortices. For considering the nonlinearities due to the neighboring blade sections, sophisticated Newton-Rapson algorithm is applied. The validation of this method was done by comparing the simulations with the measurements on the NREL Phase-VI horizontal axis wind turbine(HAWT) in the NASA Ames wind tunnel under uniform conditions. This method gives good agreements with experiments in most cases.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1926-1931
• /
• 2012

We investigated a novel fast non-uniform illumination correction method for bi-level images. The proposed method divides a bi-level image into sub-images and roughly estimates block-wise illumination by low pass filtered maximum values of sub-images. After that, we apply bilinear interpolation using the block-wise illumination to estimate non-uniform illumination, and compensate for the effect of non-uniform illumination using the estimated illumination. Since the proposed method is not based on computation intensive iterative optimization, the proposed method can be used effectively for applications that require fast correction of non-uniform illumination. In simulations, the proposed method showed more than 20 times faster speed than existing entropy minimization method. Moreover, in simulations and experiments, the restored images by the proposed method were more close to true images than images restored by conventional method.