• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.685-688
• /
• 2006

A single-phase uninterruptible power supply system suitable for a SMES unit is proposed to achieve a simple circuit configuration and higher system reliability. It reduces the number of switching devices by applying a common-arm scheme. Operational principles to normal, stored-energy, and bypass mode are discussed in detail. Eliminating some of the switches or substituting passive components for active switches generally increases the sophistication and reduces degree of freedom in control strategy. However, the high-performance digital controller ran execute the complicated control task with no additional cost. The validity of the proposed UPS system will be verified by a computer-aided simulation.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.73-79
• /
• 2003

Usual satellite design adopts hardware Error Detection and Correction (EDAC) circuitary for memory elements to endure proper operation in space radiation environment and periodic read-back(scrubbing) scheme to remove errors occurred and to prevent further accumulation of errors, in parallel, But lack of detail radiation test data upset rates of KOMPSAT-2 mass storage was estimated very worse compared to that of KOMPSAT-1, which was evaluated from very precise radiation test. Although upset rates were evaluated enough low to accommodate by KOMPSAT-2 Flight Software, hardware scrubbing scheme is studied to shorten scrubbing time as well. This paper describes hardware scrubbing architecture having minimum 1.88 minutes scrubbing interval over 1 Gbits memory.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.432-435
• /
• 2004

MSC (Multi Spectral Camera) system is a remote sensing payload to obtain high resolution ground image. In this application, uniformity characteristic is important as well as GSD (Ground Resolved Distance) and SNR (Signal to Noise Ratio). MSC image chain is consisted of OM (Optical Module), CCD, Video processor, NUC and DCSU (Data Compression and Storage Unit). Each block makes and corrects MSC's nonuniformity response. This paper shows the cause of nonuniformity error and the correction scheme of MSC system from the electronic point of view.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5560-5579
• /
• 2019

Searchable symmetric encryption (SSE) scheme can perform search on encrypted data directly without revealing the plain data and keywords. At present, many constructive SSE schemes were proposed. However, they cannot really resist the malicious adversary, because it (i.e., the cloud server) may delete some important data. As a result, it is very likely that the returned search results are incorrect. In order to better guarantee the integrity of outsourcing data, and ensure the correction of returned search results at the same time, in this paper, we combine SSE with blockchain (BC), and propose a SSE-on-BC framework model. We then construct two concrete schemes based on the size of the data, which can better provide privacy protection and integrity verification for data. Lastly, we present their security and performance analyses, which show that they are secure and feasible.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.337-342
• /
• 2010

센서 네트워크에서 발생하는 데이터를 저장하고, 효율적으로 질의를 처리하는 기법에 대한 많은 연구가 이루어지고 있다. 대표적인 연구로 데이터 중심 저장 기법이 있다. 데이터 중심 저장 기법의 경우 질의를 효과적으로 처리하기 위해 수집한 데이터 값에 따라 저장 될 센서 노드를 지정하고, 질의 처리를 위해 질의에 해당하는 데이터를 저장하는 노드에서만 데이터를 수집한다. 하지만 노드의 결함이 발생하면 결함 노드에 저장 되어 있는 전체 데이터가 소실 됨에 따라 질의 결과 정확도가 저하 되는 문제점이 발생한다. 이러한 문제를 해결하기 위해, 본 논문에서는 데이터 중심 저장 기법에서 노드 결함에 따른 데이터 소실이 발생하여도 높은 정확도를 보이는 인-네트워크 질의 처리 기법을 제안한다. 데이터 소실이 발생 하였을 경우 선형 회귀 분석 기법을 이용하여 소실 된 영역에 해당하는 보정 모델을 생성하고, 이를 통해 가상의 데이터를 포함한 질의 결과를 반환한다. 제안하는 기법의 우수성을 보이기 위해 시뮬레이션을 통해 기존의 데이터 중심 저장 기법과 성능을 비교하였으며, 그 결과 평균 98% 이상의 질의 결과 정확도를 보였고, 질의 처리 시 기존 기법에 비교하여 약 80% 이상의 에너지 소모를 감소 시켰다.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.115-124
• /
• 2013

In this paper, we suggest a secure data dissemination by Lightweight Individual Encryption Multicast scheme over wireless sensor networks using the individual encryption method with Forward Error Correction instead of the group key encryption method. In wireless sensor networks, a sink node disseminates multicast data to the number of sensor nodes to update the up to date software such as network re-programming and here the group key encryption method is the general approach to provide a secure transmission. This group key encryption approach involves re-key management to provide a strong secure content distribution, however it is complicated to provide group key management services in wireless sensor networks due to limited resources of computing, storage, and communication. Although it is possible to control an individual node, the cost problem about individual encryption comes up and the individual encryption method is difficult to apply in multicast data transmission on wireless sensor networks. Therefore we only use 0.16% of individually encrypted packets to securely transmit data with the unicast to every node and the rest 99.84% non-encrypted encoded packets is transmitted with the multicast for network performance.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1332-1341
• /
• 2023

Beam position measurement system can not only provide the beam position monitoring, but also be used for global orbit correction to reduce beam loss risk and maximize acceptance. The Beam Position Monitors (BPM) are installed along the synchrotron to acquire beam position with the front-end electronics and data acquisition system (DAQ). To realize high precision orbit measurement in the main heavy ion synchrotron and cooling storage ring of heavy-ion research facility in Lanzhou (HIRFL-CSRm), a series of alignment and calibration work has been implemented on the BPM and its DAQ system. This paper analyzed the tests performed in the laboratory as well as with beam based on the developed algorithms and hardware. Several filtering algorithms were designed and implemented on the acquired BPM raw data, then the beam position and resolution were calculated and analyzed. The results show that the position precision was significantly improved from more than 100 ㎛ to about 50 ㎛ by implementing the new designed filtering algorithm. According to the analyzation of the measurement results and upcoming physical requirements, further upgrade scheme for the BPM DAQ system of CSRm based on field programmable gate array (FPGA) technology was proposed and discussed.