• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1444-1454
• /
• 2000

The implementation of IF group delay equalizer and its performance are presented for radio relay system applications, and measured results are in good agreement with the simulated ones based upon analytical formulations. For waveguide filter of 40㎒ channel spacing, equalized delay accuracy of about +/- 2.0nsec can be obtained only by constructing 4 stage delay circuits, which provides good performance in system BER curves compared with no filter case, and the difference is less than 1.0㏈ at $10^{-12}$ BER. So this scheme with simple hardware design can be used for correcting the distorted group delays mainly caused by wavegiude filters. To evaluate the designed group delay equalizer, various simulated and experimental results are shown here in conjunction with STM-1 signal of co-channel 64-QAM digital radio relay system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1002-1004
• /
• 1996

In this paper, presented are the results of observability analysis for the vehicle maneuver during In-Flight Alignment of SDINS. The target system for observability analysis is 10th order one. Three trajectories for IFA are considered. To analyze the observability of the time varying system, correlation coefficient is used and to measure the degree of observability of the given system, simulation is carried out using covariance matrix. The results of simulation show that trajectories which are having continuous changes in attitude and acceleration of system is superior to straight trajectory in correcting navigation errors.

• 한국정보처리학회논문지
• /
• 제5권10호
• /
• pp.2591-2599
• /
• 1998

본 논문은 한국어 정보 처리 시스템의 성능 향상을 위하여 입력 문서에 존재하는 미등록어를 인식하고 철자 오류(뛰어쓰기 오류 포함)를 자동으로 교정하는 방법을 제안한다. 동일한 미등록어 후보가 포함된 둘 이상의 형태적 유사 어절을 비교 분석함으로써 입력 문서에 존재하는 미등록어를 인식하고, 오류 어절과 코퍼스내에 존재하는 교정 어절 사이의 형태적 및 문맥적 유사성에 근거하여 대량의 원시 코퍼스로부터 자동으로 오류 교정용 어휘 규칙을 생성한 후에 이를 이용하여 입력 문서에 존재하는 뛰어쓰기 및 절차 오류를 교정한다. 실험 결과에 따르면 제안한 방법으로 구현된 시스템은 약 98.9%의 정확도로 미등록어를 인식할 수 있고, 98.1%와 97.1%의 정확도로 뛰어쓰기 오류와 철자 오류를 각각 교정할 수 있다.

• 대한인간공학회지
• /
• 제28권4호
• /
• pp.117-124
• /
• 2009

To inspect the quality of data collected from a large-scale body measurement and investigation project, it is necessary to establish a proper data editing process. The three-dimensional body measurement may have measuring errors caused from measurer's proficiency or changes in the subject's posture. And it may also have errors caused in the process of algorithm expressing the information obtained from the three-dimensional scanner into numerical values, and in the course of data-processing dealing with numerous data for individuals. When those errors are found, the quality of the measured data is deteriorated, and they consequently reduce the quality of statistics which was conducted on the basis of it. Therefore this study intends to suggest a new way to improve the quality of the data collected from the three-dimensional body measurement by proposing a working procedure identifying data errors and correcting them from the whole data processing procedure-collecting, processing, and analyzing- of the 2004 Size Korea Three-dimensional Body Measurement Project. This study was carried out into three stages: Firstly, we detected erroneous data by examining of logical relations among variables under each edit rule. Secondly, we detected suspicious data through independent examination of individual variable value by sex and age. Finally, we examined scatter-plot matrix of many variables to consider the relationships among them. This simple graphical tool helps us to find out whether some suspicious data exist in the data set or not. As a result of this study, we detected some erroneous data included in the raw data. We figured out that the main errors are not because of the system errors that the three-dimensional body measurement system has but because of the subject's original three-dimensional shape data. Therefore by correcting some erroneous data, we have enhanced data quality.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.13-16
• /
• 2001

In the Dedicated Short Range Communication (DSRC) system channel, a large number of bit errors occur because of Additive White Gaussian Noise (AWGN) and fading. When an image data is transmitted under the condition, reconstructed image quality is significantly degraded. In this paper, as an alternative to the error correcting code and/or automatic repeat request scheme, we propose an error recovery scheme for image data transmission. We first analyze how transmission errors in the DSRC system channel degrade image quality. Then, in order to improve image quality, we propose error resilient and concealment schemes for still image transmission using DCT-based fixed length coding, hamming code, cyclic redundancy check, and interleaver. Finally, we show its performance by an experiment.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2002년도 11월 학술대회지
• /
• pp.47-50
• /
• 2002

This paper is to introduce 'Dr. Speaking', which was recently developed by Eonon Inc.. 'Dr. Speaking' is an English pronunciation tutoring system. This has three distinguishing features. First, it teaches how to organize a speaker's vocal organs to pronounce accurately. Second, after it compares a speaker's pronunciation with that of a native speaker's, it grades that speaker's pronunciation level according to phonetic standards. Third, it provides proper information necessary for correcting a speaker's incorrect pronunciation. It is not always easy for a tutoring system to execute the above three almost simutaneously. However, 'Dr. Speaking' proved itself that it is possible by adding speech technology (e.g. speech recognition) to phonetic knowledge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.166-167
• /
• 2011

본 논문에서는 전력 소비자 입장에서 전력가격에 큰 비중을 차지하는 System Marginal Cost(SMP)를 줄이는 방법으로 ESS를 포함하여 Unit Commitment(UC)를 수행하는 방법과 그에 따른 효과를 분석하였다. 먼저 본 논문에서는 일반적인 UC를 Lagrangian Relaxation(LR) 기법으로 얻은 최적의 결과 값을 토대로 ESS를 추가하였다. 기존의 LR알고리즘으로부터 얻은 결과 값에 ESS를 추가하는 방법으로는 Dynamic Programming 방법의 한 종류인 Label Correcting Methods[]를 사용하였다. 기존의 UC 알고리즘 결과 값을 토대로 ESS를 추가하여 SMP 감소효과 분석을 위해 실 계통에서 사용되는 종류별 발전기 10대와 임의적으로 설정한 24시간의 부하 값을 토대로 MATLAB을 이용해서 구현하였고, 결과 값을 통해 실질적인 SMP 감소효과 유무를 확인할 수 있었다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.283-286
• /
• 2004

Due to advances in electronics very high quality audio reproduction is today possible. But the listening environment causes deviation of the audio system from the expected behavior. Firstly the listening Room significantly changes the audio signal frequencies and their phase. Secondly the position of the user in the room affects the perceived sound. With existing DSP technology it is possible to adequately correct these effects. In our work we developed a room correction system, correcting up to 7.1 channels using dual Motorola 56367 fixed point DSP's, implementing position dependent room effects measurement, real time compensation filter design and equalization filtering procedures.

• 한국도서관정보학회지
• /
• 제37권4호
• /
• pp.3-20
• /
• 2006

현하 한국대학생들의 독서율이 점차 저하되고 있다. 독서부진의 제반 요인을 여러 부분에서 진단, 고찰하고, 독서저해요인을 추출함으로써 독서생활을 조장하고 독서율을 향상시키는 방안을 강구하고자 한다. 특히 본 연구에서는 대학생들의 독서철학 확립을 위한 논의를 정리하고, 또한 대학생 독서부진 해결을 위한 교육제도적 방안으로서 독서학점부과제도 또는 독서인증제도의 필요성을 강조하고자 한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제11회 학술강연회초록집
• /
• pp.7-31
• /
• 1990

Tribologicsl diagnostics as the ensemble of means and methods of continuous monitoring of the state of friction characteristics of moving junctions is playing an ever important part in the development of friction, lubrication, and wear theory end practice. The scheme presenting the main areas of tribological diagnostics is given in Fig. I. This growing part of TD is determined by the general tendency of modern technology, expressed in an attempt to organically combine the functions of measuring, evaluating,and predicting the parameters and characteristics of the processee taking place in the operating device. The logical result of this integration in future is the closed system correcting its operation in accordance with sn established program. Unfortunately, tribotechnicsl devices are still very far from such an ideal system at the present time. While in the friction assemblies with hydrodynamic lubrication it is possible in the first approximation to realize feed-backs in the lubricant circulation system with the aid of monitoring of the pressure, temperature and filtration, in the systems operating without lubrication and with boundary lubricetion even the process of selection of the diagnostic parameters has not been completed.