• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.178-181
• /
• 2001

Two methods can be used to correct the undesirable magnetic field of MRI. One is active shimming method and the other is ferro-magnetic shimming. Ferro-magnetic shimming method is more inexpensive, more convenient in operation and more effective on correcting magnetic field. So, nowadays, it is the general method for shimming the commercialized MRI magnet. We have developed a 1.5T MRI magnet and its ferromagnetic shimming system. Using the ferro-magnetic shimming system, we have improved the field homogeneity of the 1.5T MRI magnet.

• 한국광학회지
• /
• 제5권1호
• /
• pp.90-99
• /
• 1994

모드록킹된 피코초 레이저, 고속전자장치, 전자관형 광증배관 등을 사용하여, 피코초 분해능을 갖는 시간상관 단광자 계수 장치 및 시분해 스펙트럼 측정 장치를 제작하였다. 기기감음함수는 레이저의 펄스모양, 고속전자장치의 timing jitter 및 walk, 광증배관과 증폭기의 특성에 민감함을 보여주었다. 광학계의 분산등을 보정하여 25 ps의 반치폭을 갖는 기기감응함수를 얻었으며, 이와 같은 결과는 이 장치를 사용할 경우 deconvolution을 통하여 10 ps 이하의 분해능으로 피코초에서 마이크로초의 넓은 범위에 걸쳐서 여기상태 소멸시간의 측정이 가능함을 보여준다.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.23-29
• /
• 2018

건설현장에서 흔히 발생하는 안전관리 문제점 중 시정조치 지연으로 인해 발생하는 재해율을 낮추기 위해, 기존의 시스템 중 점검 후 시정조치를 할 때까지 발생하는 시간을 단축하기 위하여 사전에 사고유형 데이터베이스를 구축하고 점검시 유사도 검사를 이용하여 점검자에게 문제점을 실시간으로 알려주어 현장에서 바로 시정조치를 수행할 수 있는 시스템을 모델링하여, 안전사고에 보다 적극적으로 대처할 수 있는 시스템을 연구하였다. 연구 결과 90 %이상의 개방 효과와 60 %이상의 안전사고 감소율이 있음을 알 수 있었다. 이 시스템을 기반으로 음성 인식과 딥러닝을 결합하여 보다 효과적인 시스템을 지속적으로 연구 할 것이다.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.219-226
• /
• 2013

A distortion correction technique is presented to enhance the 3D scanning performance of a micro-size camera-projector system. Recently, several types of micro-size digital projectors and cameras are available. However, there have been few effort to develop a micro-size 3D scanning system. We develop a micro-sized 3D scanning system which is based on the structured light technique. Three images of phase-shifted sinusoidal patterns are projected, captured, and analyzed by the system to reconstruct 3D shapes of very small objects. To overcome inherent optical imperfection of the micro 3D sensor, we correct the vignetting and blooming effects which cause distortions in the phase image. Error analysis and 3D scanning results on small real objects are presented to show the performance of the developed 3D scanning system.

• 한국중재학회지:중재연구
• /
• 제29권4호
• /
• pp.187-210
• /
• 2019

This article examines the necessity for the introduction of an ICSID Appellate System. In comparison with the WTO appellate system, the ICSID ad hoc Committee has a very limited mandate. An annulment inquiry under the ICSID arbitration system barely focuses on whether the arbitral decision resulted from a justifiable process. As long as there is procedural legitimacy, the resulting awards remain unaffected under the annulment procedure, irrespective of mistakes of fact or law. In contrast, in the WTO DSS the AB substantively reviews panel rulings and suggestions that are founded on any deficiency of objectivity or error in the interpretation of a particular WTO provision. This defect intrinsic in the annulment procedure could cause injustice to a party earnestly interested in correcting recognized misapplication of law by ICSID tribunals. Accordingly, the establishment of an appellate system would result in a more substantive and procedural review of awards. The creation of such an ICSID appellate system would ensure thorough scrutiny of the decisions of the tribunal of first instance, leading to better reasoned outcomes. This could lead to a crystallization of predictability in investment relations. The end result would be that fairness, clarity, reliability, and legality in the ICSID adjudicative process would be unassailable, to the advantage of all the contracting parties.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.1032-1036
• /
• 2006

In this study, we implement the potable blood gas analyzer measuring pH, $pCO_2\;and\;pO_2$ of the arterial blood. The implemented system by this study is divided into hardware and software part and also the hardware portion is parted by mechanism and electronic circuit mit. The system program is composed of operating, washing, correcting and measuring program. And to correct the system, two-point calibration method is used, one-point calibration method is also added for more accuracy, and system program is coded. For verifying the implemented system, We examine to response property of each electrode. And evaluate accuracy of the system using standard reagent and was construed as statistical.

• 대한원격탐사학회지
• /
• 제18권3호
• /
• pp.147-153
• /
• 2002

The real-time reception and recording of down-link mission data from a satellite requires the highest reliability because the data lost in receiving process cannot be recovered. The data receiving and recording system has moved from a set of dedicated hardware and software components to commercial-off-the-shelf (COTS) components in order to reduce the system cost as well as to upgrade the system easily for handling other satellite data. The use of COTS hardware and middleware components prevents the system developer from correcting or modifying the internal operations of the COTS components, and hence, instant performance degradation of the COTS components which affects the reliable data acquisition must be covered by a software algorithm. This paper introduces the instant performance problem of a COTS data recording device which leads to the data loss in the real-time data reception and recording process. As a result, the requirement of the modification of the conventional data read/write technique is issued. In order to overcome the data loss problem due to the use of COTS components and the conventional software technique, a new algorithm called a software buffering technique is proposed. The experiments show that the application of the proposed technique results in reliable real-time reception and recording of high speed serial data.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1101-1105
• /
• 2011

Radiation particles can introduce temporary errors in memory systems. To protect against these errors, so-called soft errors, error detection and correcting codes are used. In addition, scrubbing is applied which is a fundamental technique to avoid the accumulation of soft errors. This paper introduces an optimal scrubbing scheme, which is suitable for a system with auto error detection and correction logic. An auto error detection and correction logic can correct soft errors without CPU's writing operation. The proposed scrubbing scheme leads to maximum reliability by considering both allowable scrubbing load and the periodic accesses to memory by the tasks running in the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• 디지털산업정보학회논문지
• /
• 제6권3호
• /
• pp.9-17
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used superposition which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time. Through this study, in terms of superposition model and simply model, the optimal time to using superposition model release the software developer to determine how much could count will help.