• Journal of Environmental Science International
• /
• v.20 no.6
• /
• pp.783-788
• /
• 2011

Different from the main land of South Korea, Jeju Island has been in difficulties for measuring discharge. Due to high infiltration rate, most of streams in Jeju Island are usually in the dried state except six streams with the steady base flow, and the unique geological characteristics such as steep slope and short traveling distance of runoff have forced rainfall runoff usually to occur during very short period of time like one or two days. While discharge observations in Jeju Island have been conducted only for 16 sites with fixed electromagnetic surface velocimetry, effective analysis and validation of observed discharge data and operation of the monitoring sites still have been limited due to very few professions to maintain such jobs. This research is sponsored by Ministry of Land, Transport and Maritime Affairs to build water cycle monitoring and management system of Jeju Island. Specifically, the research focuses on optimizing discharge measurement techniques adjusted for Jeju Island, expanding the monitoring sites, and validating the existing discharge data. First of all, we attempted to conduct discharge measurements in streams with steady base flow, by utilizing various recent discharge monitoring techniques, such as ADCP, LSPIV, Magnetic Velocimetry, and Electromagnetic Wave Surface Velocimetry. ADCP has been known to be the most accurate in terms of discharge measurement compared with other techniques, thus that the discharge measurement taken by ADCP could be used as a benchmark data for validation of others. However, there are still concerns of using ADCP in flood seasons; thereby LSPIV would be able to be applied for replacing ADCP in such flooded situation in the stream. In addition, sort of practical approaches such as Magnetic Velocimetry, and Electromagnetic Wave Surface Velocimetry would also be validated, which usually measure velocity in the designated parts of stream and assume the measured velocity to be representative for whole cross-section or profile at any specified location. The result of the comparison and analysis will be used for correcting existing discharge measurement by Electromagnetic Wave Surface Velocimetry and finding the most optimized discharge techniques in the future.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.65-73
• /
• 2008

The characterization process for the accurate color reproduction in mobile phone with camera and LCD is popular. The camera and LCD characterization, gamut mapping process is necessary to map the camera's input color stimulus, CIEXYZ value, into the LCD's output color stimulus. Each characterization is the process estimating the relation between input and output signals. In case of LCD, because of output device, the output color stimulus for the arbitrary input signal can be measured by spectro-radiometer However, in the camera, as the input device, the characterization is an inaccurate and needs the manual works in the process obtaining the output signal because the input signal can not be generated. Moreover, after gamut mapping process, the noise is increased because the optimized gamma tone curve of camera for the noise is distorted by the characterization. Thus, this paper proposed the system of obtaining the output signal of camera and the method of gamma correction for the noise. The camera's output signal is obtained by RGB values of patches from captured the color chart image. However, besides the illumination, the error for the location of the chart in the viewfinder is generated when many camera modules are captured the chart. The method of correcting the position to correct the error from manual works. The position of camera is estimated by captured image. This process and moving of camera is accomplished repeatedly, and the optimized position can be obtained. Moreover, the lightness curve of camera output is corrected partly to reduce the noise from the characterization process.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.367-375
• /
• 2008

Anchorage plays an important role in orthodontic treatment. Skeletal anchorage like the miniscrew is considered a more effective method in anchorage control than conventional anchorage which needs much patient's cooperation. The miniscrew offers many advantages. 1) It is easy to insert and to remove. 2) It can endure the force needed for moving teeth. 3) It can be immediately loaded and 4) Patient cooperation is not needed. 5) It is economic compared to other skeletal anchorage systems. In comparison to adult's bones, children's bones have comparatively poor bone quality and quantity. Therefore, it is hard to obtain primary stability in younger patients. However, if the miniscrew can be retained successfully, it will be effective in many orthodontic treatments. In these cases, we used the miniscrew in correcting of diastema, in aligning dental midline, and in rendering a forced eruption of impacted tooth in mixed dentition patient. We obtained satisfactory results.

• Korean Journal of Cognitive Science
• /
• v.4 no.1
• /
• pp.153-176
• /
• 1993

Structual ambiguity is one of those problem that arise in the analysis of natural language sentences.It has been considered very difficult to solve the problem.Structural ambiguity,however,should be resolved no matter how difficult it may be.Otherwise natural language processing could be virtually impossible.A statistical approach to structural disambiguation is proposed in this dissertation.The information-theoretic concept of mutual information has been empolyed in resolving structural ambiguity Mutual information can be acquired in an automatic way.from text corpora. If a structural disambiguation subsystem had the capability of self-evaluating whether the results of structural disambiguation are correct or not.it would be possible to develop a more intelligent natural language proessing system.In this paper,the concept of confidence measure is also proposed to endow the disambiguation subsystem with such intelligence.Confidence measure is a numeric value calculated after structural disambiguation. Some experiments were performed in order to show the validity of the approach.Mutual information was auto matically acquired from a corpus of 1.6milion words that were collected from scientific abstracts.The accuracy of structural disambiguation was 80%when performed over 1,639 test sentences.Notice that there was no manual tuning in advance for the experiments.The task of detecting and correcting errors in structural disambiguation will be performed very effectively if the concept of confidence measure is employed in the process.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.4
• /
• pp.982-992
• /
• 2005

Acupuncture as a therapeutic intervention is widely used for the treatment of many functional disorders such as substance abuse and mental dysfunction. Clinical trials are currently underway to determine the effectiveness of acupuncture in the treatment of drug addiction. Yet, there are still many unanswered questions about the basic mechanism of acupuncture. Studies have shown that both the psychomotor stimulant effects and rewarding properties of addictive drugs, including morphine, are sensitized by repeated drug administration and raised the possibility that both of these effects may De linked to the same or closely overlapping the mesolimbic dopamine systems. Neiguan (PC6) point on the pericardium channel which is associated with the brain and its mental function, has been used to treat mental, psychosomatic disorders and gastroenterological disorders. The present study was designed to investigate the effect of acupuncture on repeated morphine-induced changes in extracellular dopamine levels using in vivo microdialysis and to measure the effect of acupuncture on repeated morphine-induced behavioral changes. Male Sprague-Dawley rats were treated twice a day for three days with increasing doses of morphine (10, 20 and 40 mg/kg, s.c.) or with saline. After 15 days of withdrawal, rats were challenged with morphine hydrochloride (5 mg/kg, s.c.). Acupuncture was applied at bilateral Neiguan (PC6) points for 1min after the morphine challenge. Results showed that acupuncture at the specific acupoint PC6, but not at control points (tail and HE8) significantly decreased both dopamine release, behavior induced by a systemic morphine challenge or a single s.c. morphine injection in the morphine-repeated animals. These results suggest that reduction in sensitization may be one mechanism whereby acupuncture alleviates morphine craving in addicts. Moreover, in a more general sense these results suggest that acupuncture can be used as a therapeutic intervention for correcting reversible malfunction of the body by direction of brain pathway and thus acupuncture can contribute to the biochemical balance in the central nervous system by regulating neurotransmitters.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.1-10
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Pinus koraiensis and Larix kaempferi were two of the three species examined for the first year. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMCs and sorption isotherms at various RH conditions. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences in the thermal and electric properties between quarter- and flat-sawn specimens were observed, which were partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and acoustic properties of wood.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.6
• /
• pp.51-56
• /
• 2009

Safety and quality assessment systems are very important in manufacture, storage, transportation, and handling of hazardous materials(hazmat) to prevent hazmat disasters. At present, hazardous materials exist everywhere in our daily lives with various forms of plastics, household products of cleaning and washing detergents, fertilizers or petroleum-related products. However, hazardous materials are dangerous substances when they are released to human or environment. Hazardous materials become very widely used substances in the age of oil-based industrial economy. The Korean Ministry of Environment (KMOE) describes about one hundred thousand types of chemicals are produced and used worldwide. Over four hundred new chemicals are introduced in every year. A crucial question for the Korean hazardous material management may have been raised: Will you be safe from hazardous material incidents? The gas leak disaster at Union Carbide's Bhopal, India in 1984 that made over 6,400 people killed and 30,000 to 40,000 people seriously injured is the representative case for the safety of hazmat. Korea becomes vulnerable to hazmat disaster due to the development of high-tech industry. Thus, the risk assessment system is required to Korea for transferring abandoned hazmat management systems to self-correcting safety systems. This research analyzed characteristics of various hazmat incidents applying statistical analysis methods including frequency analysis or analysis of category data to hazmat incidents for ten years. All of three analyses of category data indicate the significance of causality between hazmat incident site groups and seasons, regional groups, and incident casualty groups.

• Clinics in Shoulder and Elbow
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2014

Background: Normal elbow joint kinematics has been widely studied in cadaver, whilst in vivo study, especially of the forearm, is rare. Our study analyses, in vivo, the kinematics of normal forearm and of malunited forearm using a three-dimensional computerized simulation system. Methods: We examined 8 patients with malunited Monteggia fracture and 4 controls with normal elbow joint. The ulna and radius were reconstructed from CT data placing the forearm in three different positions; full pronation, neutral, and full supination using computer bone models. We analyzed the axis of rotation 3-dimentionally based on the axes during forearm rotation from full pronation to full supination. Results: Axis of rotation of normal forearm was pitch line, with a mean range of 2 mm, from full pronation to full supination, connecting the radial head center proximally and ulnar fovea distally. In normal forearm, the mean range was 1.32 mm at the proximal radioulnar joint and 1.51 mm at the distal radioulnar joint. However in Monteggia fracture patients, this range changed to 7.65 mm at proximal and 4.99 mm at distal radoulnar joint. Conclusions: During forearm rotation, the axis of rotation was constant in normal elbow joint but unstable in malunited Monteggia fracture patients as seen with radial head instability. Therefore, consideration should be given not only to correcting deformity but also to restoring AOR by 3D kinematics analysis before surgical treatment of such fractures.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.245-251
• /
• 2019

Sonar bearing accuracy is the correspondence between the target orientation predicted by sonar and actual target orientation, and is obtained from measurements. However, when measuring sonar bearing accuracy, many errors are included in the results because they are made at sea, where complex and diverse environmental factors are applied. In particular, parallax error caused by the difference between the position of the GPS receiver and the sonar sensor, and the time delay error generated between the speed of underwater sound waves and the speed of electromagnetic waves in the air have a great influence on the accuracy. Correcting these parallax errors and time delay errors without an automated tool is a laborious task. Therefore, in this study, we propose a sonar bearing accuracy measurement equipment with parallax error and time delay error correction. The tests were carried out through simulation data and real data. As a result of the test it was confirmed that the parallax error and time delay error were systematically corrected so that 51.7% for simulation data and more than 18.5% for real data. The proposed method is expected to improve the efficiency and accuracy of sonar system detection performance verification in the future.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.71-90
• /
• 2012

Although it has been studied for a long time in various disciplines, most of control theories remain being developed by analyzing relatively simple tasks. Even recent research on control of information systems development explains only a small part of control phenomena observed in the real world projects. This research focuses on identifying and analyzing the concepts and structures in order to make them useful for understanding and explaining control of information systems development comprehensively This investigation utilizes the complementary relationship between views on control from organizational and economic perspectives. A conceptual framework developed by integrating previous research on control allows us to analyze the development of information systems for control purposes. The results of discussion about control mechanisms and network can be used as guidelines for designing control systems in real projects. Analysis of control networks shows that control of development projects requires quite complex networks intertwining a variety of controllers and controlees. The results of this research are expected to contribute to correcting the unbalanced status of IS research which has emphasized too heavily on planning and implementation, and deepening and widening our understanding about controlling development projects. Practitioners can use the results as guidelines for designing control mechanisms and networks, and get alerted by them about the agency risks inherent in outsourced developments.