• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.579-591
• /
• 2004

This paper presents a new arc segmentation method which extracts curves from simple drawing consisted of straight lines and curves and segments them into circular arcs. First, it finds center points and finds line segments and curve segments by tracing connected center points. Next, it expands the segment by searching neighbor segment at the two endpoints. Next, it removes straight lines and segments the extracted curves into circular arcs by using the recursive subdivision method. The proposed method has been compared with previous vectorization software and vector based arc segmentation method. Experimental results show that the proposed method produces more correct results for the curves which contain intersection with other lines or curves.

• Environmental and Resource Economics Review
• /
• v.21 no.3
• /
• pp.627-681
• /
• 2012

This paper starts with a model of monopolistic competition and endogenous growth, and it adds pollution as an input to production. Then I adopt environmental quality as a renewable resource used in production. I show that increasing returns due to specialization of clean activities as inputs can help lead to sustainable growth with no harm to environmental quality. I also compare and evaluate alternative policy combinations (i.e. taxes +subsidies) that correct two distortions from pollution and monopolistic competition. Finally, I find that, if the productivity of environment in final good production is not sufficiently enough, the number of clean goods tends to increase with more environmental concerns.

• Asian Journal of Business Environment
• /
• v.9 no.3
• /
• pp.5-9
• /
• 2019

Purpose - This paper examines whether fiscal and monetary expansion would affect output in Australia. Research design, data, and methodology - An extended IS-LM model which describes the equilibrium in the goods market and the money market is applied. The real effective exchange rate and the real stock price are included in order to determine whether there may be any substitution or wealth effect. The sample consists of Annual data ranging from 1990 to 2018. The GARCH process is used in empirical work to correct for potential autoregressive conditional heteroscedasticity. Results - Expansionary fiscal policy reduces output; whereas, expansionary monetary policy raises output. In addition, real appreciation of the Australian dollar, a lower U.S. interest rate, a higher real stock price or a lower expected inflation would increase output. The finding that expansionary fiscal policy has a negative impact on real GDP suggests that the negative crowding-out effect on private spending dominates the positive impact. Conclusions - Fiscal prudence needs to be pursued. Real depreciation of the Australian dollar hurts output. Monetary tightening in the U.S. generates a negative effect on Australia's output. A healthy stock market is conducive to economic growth as higher stock prices tend to result in the wealth and other positive effects, increasing consumption and business spending.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.737-744
• /
• 2004

Retrieving relevant information well corresponding to the user`s request from web is a crucial task of search engines. However, most of conventional search engines based on pattern matching schemes to queries have a limitation that is not easy to provide results corresponding to the user`s request due to the uncertainty of queries. To overcome the limitation in this paper, we propose a framework for knowledge-based semantic meta-search engines with the following five processes: (i) Query formation, (ii) Query expansion, (iii) Searching, (iv) Ranking recreation, and (v) Knowledge base. From simulation results on english-based web documents, we can see that the Proposed knowledge-based semantic meta-search engine provides more correct and better searching results than those obtained by using the Google.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.40-49
• /
• 2010

The Purpose of this paper is to weld a rapid palatal expander using a continuous wave Nd:YAG laser. The rapid palatal expander has become a useful treatment method for severe maxillary transverse deficiencies and posterior crossbites. Rapid maxillary expansion is a well-established method to correct transverse maxillary deficiency and arch length discrepancy. The major process parameters studied in the present laser welding experiment were the positions of focus, laser power and travel speed of laser beam. We measured the fusion zone size and its shape using an optical microscope for the observation of cross-sectional area and tension stress of a rapid palatal expander welded. Through the experimental investigation, the optimum speeds and power of laser without deficiencies of weld cross-sectional area were obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.70-77
• /
• 2000

Supersonic Dual Bell Nozzle (SDBN) is an altitude-adaptive propulsion nozzle achieved only by a nozzle wall inflection. In order to investigate the altitude adaptive capability and the effectiveness of this nozzle concept, the present study addresses a computational work of the flow through SDBN. Several types of the SDBNs are tested for a wide range of the pressure ratio which covers from an over-expended flow to a fully under-expended flow at the exit of the SDBN. Axisymmetric, compressible, Wavier-Stokes equations are numerically solved using a fully implicit finite volume differencing scheme. The present computational results reveal that the base nozzle length affects the shock wave system occurring inside SDBN. For a quit wide range of the pressure ratio the flow separation occurs at the nozzle inflection point. It is found that the maximum thrust coefficient is obtainable for the correct expansion state at the exit of SDBN.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.259-269
• /
• 2024

Optical imaging systems that operate through atmospheric pathways often suffer from image degradation, mainly caused by the distortion of light waves due to turbulence in the atmosphere. Adaptive optics technology can be used to correct the image distortion caused by atmospheric disturbances. However, there are challenges in conducting experiments with strong atmospheric conditions. An optical phase plate (OPP) is a device that can simulate real atmospheric conditions in a lab setting. We suggest a novel two-step process to fabricate an OPP capable of simulating the effects of atmospheric turbulence. The proposed fabrication method simplifies the process by eliminating additional activities such as phase-screen design and phase simulation. This enables an efficient and economical fabrication of the OPP. We conducted our analysis using the statistical fluctuations of the refractive index and applied modal expansion using Kolmogorov's theory. The experiment aims to fabricate an OPP with parameters D/r₀ ≈ 30 and r₀ ≈ 5 cm. The objective is defined with the strong atmospheric conditions. Finally, we have fabricated an OPP that satisfied the desired objectives. The OPP closely simulate turbulence to real atmospheric conditions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.357-366
• /
• 2008

Posterior cross-bite is a relatively frequent malocclusion in primary and early mixed dentition and the reported prevalence of posterior cross-bite varies from 7% to 23%. It has been defined as a transverse discrepancy in arch relationship which the palatal cusp of the upper posterior teeth do not occlude in the central fossa of the opposing lower teeth, and can be manifested in a single tooth or in a group of teeth. Posterior cross-bite does not often self-correct and therefore immediate treatment is recommended. Occlusal adjustment to eliminate premature contact that causes mandibular deviation, expansion of narrow maxillary arch, arrangement of the individual teeth to treat asymmetry within the dental arch are the methods of treating cross-bite. In the present case, functional posterior cross-bite was observed in the primary and the early mixed dentition children. The children were treated by the slow maxillary expansion and occlusal adjustment. The outcome of periodic examinations after the correction of cross-bite was favorable.

• The Journal of Korean Physical Therapy
• /
• v.30 no.4
• /
• pp.141-145
• /
• 2018

Purpose: Changes in the curvature of the vertebral columns of elderly women with increasing age causes various side effects and disorders. Therefore, this study was conducted to evaluate the effectiveness of the 8-figure scapular brace to improve pulmonary function and balance ability based on lung capacity and foot pressure by increasing the vertebral curvature. Methods: Seventeen elderly women with a forward head posture were selected. Women were asked to wear the 8-figure scapular brace and the forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) were measured, as were changes in foot pressure. Measurements were conducted three times each and the mean values were used for subsequent analyses. For static evaluation, we used the paired t-test to identify differences between pre and post values. Results: There was no significant difference in FEV1 and FVC before and after use of the brace (p>0.05); however, there was a significant decrease in forefoot pressure and an increase in rearfoot pressure following application of the brace (p<0.05). Conclusion: Application of the 8-figure scapular brace to correct vertebral curvature in elderly women influenced pressure distribution change from immediate effect body arrange of cervical and thoracic. However, wearing the 8-figure scapular brace may interfere with expansion of the chest and therefore respiratory muscle activity. Accordingly, it is necessary to apply appropriate treatment when wearing a scapular brace and to allow a sufficient intervention period while also providing therapeutic interventions such as posture correction or respiration training.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.1
• /
• pp.303-322
• /
• 2013

A relevance of supporting business of technology financing for technologically innovative SMEs is strongly required for its continuous expansion and development. This study analyzes empirically whether the selection of recipient firms from technology financing have been performed in accordance with its objectives and purposes. Results show that the probability of receiving technology financing is more likely to increase with higher technology rankings and higher operating income ratio. On the other hand, the probability of obtaining financing might be decreased gradually, as the size of capital and age of the firm are increasing. Results also show that technology rankings and firm's major characteristics are found to affect significantly on the decision-making of technology financing. Several useful comments are suggested to improve the relevance of the technology financing since the correct classification rate, which explains the appropriateness of the model, is not at high level. In addition, technology rankings are not uncorrelated with the amount of financing in regression analysis. These research results will contribute to ensure the appropriateness and credibility of the technology financing decision-making.