• Journal of Environmental Science International
• /
• v.18 no.2
• /
• pp.239-244
• /
• 2009

In this study, to stabilize the heavy metal in the contaminated soils, the column leaching test based on rainfall and pH value was performed by using coal mine drainage sludge(CMDS): which was generated during electrical purification of abandoned coal mine wastewater. Four types of testing column were used in this study. That were the CMDS and the heavy metal contaminated soils well mixed in 0 wt%, 1 wt%, 3 wt% and 3 wt% layered column. According to the investigation, when the influent pH was $5.5{\sim}6.2$, there were no heavy metal elution at all conditions, and when the influent pH was $3{\sim}3.3$, the order of Cu, Zn, Pb, Cr elution concentration was 3 wt% M(mixed)<3 wt% S(separation)<1 wt% M<0 wt% and the average elution concentration was quite low, the value was 0.005 mg/L. Therefore, CMDS can used as new stabilizer of the heavy metal in the contaminated soils.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.3-15
• /
• 2001

The bilayer forming ability of pseudo-ceramide PC104 in octanoic acid/water/n-octyl $\beta$-D-glucoside mixtures was investigated through the phase diagram. Because of its low solubility in water and of its crystallization, pseudoceramide PC104 was dissolved in octanoic acid, which is nontoxic additive for foods and cosmetics. The mixtures formed four different phases (L1, L2, LC and two phases). Depending on the concentration of PC104 in octanoic acid, the region of each phase was extended or contracted. On the contrary to the region of L2, regions of lamellar phase and L1 phase were expanded. The bilayer-forming ability of PC104 was explained on the basis of concentration of PC104 at interface and interaction between PC104 and octanoic acid. From FT-IR results, it was found that the interactions of PC104’s polar head group with octanoic acid increased as the amount of PC104 in octanoic acid increased. Also emulsion size and size distribution have been studied depending upon the emulsification path. droplets of emulsion prepared from lamellar phase were smaller and more homogeneous compared to those of emulsions formed from L2 phase.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.291-294
• /
• 2014

Multiple additives can help improve the performance of generally used lubricants. These additives include MoS2, cadmium, chloride, indium, sulfide, and phosphide, which are harmful to both humans and the environment. Thus, researchers in this industry have been trying to reduce the use of these additives by finding alternatives. Nanodiamonds are one of these candidates. Nanodiamond particles are very hard, chemically stable, and highly heat-conductive. This research involved uniformly dispersing nanodiamond particles in marine engine oils via a matrix synthesis method at various concentrations (0, 0.1, 0.3, 0.5, and 1.0 wt). Friction and wear tests involved constant loads on ball-on-disk specimens, where the ball was AISI 51200 steel, the disk was AISI 1020 steel, and the sliding speed was 0.217 m/s. The lowest wear occurred at a suitable concentration of nanodiamonds (0.3 wt). However, excessive amounts of nanodiamonds caused them to act as abrasive debris because of their hardness, which increased the wear amount. The friction coefficient decreased as the nanodiamond concentration increased because their octagonal, almost spherical shape caused them to act as rolling contact elements between two surfaces.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1357-1360
• /
• 2008

Propionibacterium acnes is the predominant organism in sebaceous regions of the skin and is thought to play an important role in the pathogenesis of inflamed lesions. Antibacterial compounds against P. acnes were isolated from the ethanol extract of Kaempferia pandurata Roxb. and identified as panduratin A and isopanduratin A. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of panduratin A for P. acnes were 2 and $4{\mu}g/mL$, respectively, while those of isopanduratin A were 4 and $8{\mu}g/mL$, respectively. The time-dependent killing effect showed that panduratin A and isopanduratin A completely inhibited the growth of P. acnes at 4 and $8{\mu}g/mL$ in 48 hr, respectively. Panduratin A and isopanduratin A demonstrated high antibacterial activities not only against P. acnes but also other skin microorganisms. The results suggest that panduratin A and isopanduratin A could be employed as natural antibacterial agents to inhibit the growth of acne and skin disease causing microorganisms.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.776-783
• /
• 2011

In a natural water body, a useful ecotechnology to reduce standing crops of phytoplankton is to strengthen the top-down force of zooplankton. However, the predation of fish for zooplankton can make the force weak. This study was conducted to find out the effect of fish on the grazing pressure of zooplankton in the mesocosms established in a eutrophic stream (Kyongan Stream) from October to November in 2010. In the corral with fish, chlorophyll a concentration increased, and a small size cladoceran Bosmina longirostris was dominant. In the corral without fish, chlorophyll a concentration decreased along with the domination of a large cladoceran Daphnia galeata and a large copepod Eudiaptomus japonicus. The size-selective predation of fish appeared to miniaturize the zooplankton community, to narrow their food-size spectrum, and to weaken the top-down force.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.145-152
• /
• 2016

Recently, we can find news about toxic and combustible gas accident. So, we have to develop gas detector that can measure gas at dangerous area for preventing gas accidents. In this paper, we calculate a approximation function from sensor's output using the linear regressiong. And we develop software algorithm using Neville's algorithm for measuring gas concentration. Finally, we compare our algorithm with combustible gas detectors that are already developed, by using standard gas samples manufactured Korea Gas Safety. As a result of this experiment, we confirm that performance of our algorithm is more improved than performance of already developed combustible gas detectors. In the future, we'll research how to improve reliability from using count, temperature and humidity. And we'll design hardware applied explosion proof for safety.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.1
• /
• pp.57-65
• /
• 2010

Currently, the pursuit of industrialization for rapid economic growth has led to serious environmental damage and related problems because of comtamination with chemicals. Over time, this contaminaion is getting worse and worse. Most developing countries have tried to pursue their economic development and growth, however without preparation for the control and disposal of hazardous wastes. Permitting hazardous waste to be abandoned and disposed in appropriately causes soil pollution, groundwater contamination, and surface water contamination, which are all extremely serious. In particular, when hazardous wastes which include toxic chemicals are distributed around the living environment even in small amounts, concentration can occur in the food chain through ecological systems, which can therefore affect human. Chromium(VI) has contaminated soil in China. We experimented to test the immobilization, chemical reduction, and soil washing methods in order to make our experiment efficient in the purification of soil contaminated with Chromium(VI), and to prove the theoretical models by experiments testing the field applications. The field experiment showed that result of experiment satisfied with the standards of China. The result of multi-stage continuous remediation reduce the Chromium(VI) concentration to 11.95 mg/kg and 14.83 mg/kg that were equivalent to 98% and 97% removal rates. This result implied we could apply multi-stage process of Chromium(VI) contaminated soil to meet the regulatory limit of Chromium(VI).

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.3
• /
• pp.197-207
• /
• 2016

It is very important to maintain a constant chlorine concentration in the post chlorination process, which is the final step in the water treatment process (hereafter WTP) before servicing water to citizens. Even though a flow meter between the filtration basin and clear well must be installed for the post chlorination process, it is not easy to install owing to poor installation conditions. In such a case, a raw water flow meter has been used as an alternative and has led to dosage errors due to detention time. Therefore, the inlet flow to the clear well is estimated by a time series neural network for the plant without a measurement value, a new residual chlorine meter is installed in the inlet of the clear well to decrease the control period, and the proposed modeling and controller to analyze the chlorine concentration change in the well is a neuro fuzzy algorithm and cascade method. The proposed algorithm led to post chlorination and chlorination improvements of 1.75 times and 1.96 times respectively when it was applied to an operating WTP. As a result, a hygienically safer drinking water is supplied with preemptive response for the time delay and inherent characteristics of the disinfection process.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.99-106
• /
• 2015

Polysulfone (PSF) hollow fiber membrane was prepared to separate $CO_2$ from the flaring gas. Fabricated PSF membrane system was fulfilled under 1 stage, 2 stage membrane process and simulation in order to confirm the operating condition for 99% of $CH_4$ and 1% of $CO_2$ concentration. Also, $25Nm^3/h$ bench scale $CO_2$ separation membrane system was operated under 1% of $CO_2$ concentration during 100 hr, and $CH_4$ recovery ratio was 98%.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.4
• /
• pp.455-460
• /
• 2020

In order to identify the characteristics of fine particle emissions from thermal power plants, this study conducted measurement of the primary emission concentration of TPM, PM₁₀ and PM_2.5 according to Korea standard test method (ES 01301.1) and ISO 23210 method (KS I ISO 23210). Particulate matters were sampled in total 74 units of power plants such as 59 units of coal-fired power plants, 7 units of heavy oil power plants, 2 units of biomass power plant, and 6 units of liquid natural gas power plants. The average concentration of TPM, PM₁₀, PM_2.5 by fuel are 3.33 mg/m³, 3.01 mg/m³, 2.70 mg/m³ in coal-fired plant, 3.02 mg/m³, 2.99 mg/m³, 2.93 mg/m³ in heavy oil plant, 0.114 mg/m³, 0.046 mg/m³, 0.036 mg/m³ in LNG plant, respectively. These results of TPM, PM₁₀ and PM_2.5 were satisfied with the standards of fine dust emission allowance in all units of power plants, respectively. Also, this study evaluated the characteristics of fine particle emissions by conditions of power plants including generation sources, boiler types and operation years and calculated emission factors and then evaluated fine particle emissions by sources of electricity generation.