• 국제초고층학회논문집
• /
• 제8권4호
• /
• pp.283-290
• /
• 2019

Corner cut, corner chamfered or a building shape change are adopted in the design of tall buildings to achieve aerodynamic superiority as well as response reduction. Kikuchi et.al pointed out that large negative peak external pressures can appear near the inside corner of set-back low rise buildings. It is therefore necessary to pay attention to facade design around steps in building surfaces. Peak wind pressures for corner cut or corner chamfered configurations are given in the AIJ code. However, they cannot be applied where there are many variations of vertical and horizontal steps. There has been no previous systematic research on peak wind pressures around steps in building surfaces. In this study, detailed phenomenon of peak wind pressures around steps in buildings are investigated focusing on vertical and horizontal distances from the building's corner.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.103-112
• /
• 2016

Recently, many New Han-oks have been constructing in all over the country to popularize as a type of green house. But, achievement of thermal performance of external wall is still the very important issue to become popular. Purpose: The purpose of this study is to verify the thermal performance level of modern New Han-ok through Temperature Difference Ratio inside(TDRi) analysis at corners of the external wall in Han-ok. Method: To achieve this goal, measurements were carried out in 12 Han-oks(experimental mock-up(1), exhibition Han-ok(1), happy village Han-oks(10)) by taking a infra-red thermography using thermal video system. Following are analysis items about connection joint between wall and wood columns of external wall conditions; the part between external wall and external wall(2D), external wall and ceiling(or floor)(2D), 2 external walls and ceiling(or floor)(3D) and so on. Result: It was analyzed that the probability of condensation at most of connection joint appear high and TDRi of 3D corners is higher than that of 2D corners in general. It means that the development of construction techniques about connection joint between wood columns and external wall is still required. The results of this study may be used to improve the construction technology of new Han-ok and as a basis for the specifying the desired thermal comfort environment of dwelling.

• Wind and Structures
• /
• 제35권1호
• /
• pp.55-66
• /
• 2022

Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification involved the rounding of sharp corners. In this work, we systematically analyze the impact of rounded corner radii on the reducing the flow-induced loading on a square cylinder. We perform 3-Dimensional (3D) simulations for high Reynolds number flows (Re=1 × 105) which are more likely to be encountered in practical applications. An Improved Delayed Detached Eddy Simulation (IDDES) method capable of capturing flow accurately at large Reynolds numbers is employed in this study. The IDDES formulation uses a k-ω Shear Stress Transport (SST) model for near-wall modelling that prevents mesh-induced separation of the boundary layer. The effects of these corner modifications are analyzed in terms of the resulting variations in the mean and fluctuating components of the aerodynamic forces compared to a square cylinder with no geometric changes. Plots of the angular distribution of the mean and fluctuating coefficient of pressure along the square cylinder's surface illustrate the effects of corner modifications on the different parts of the cylinder. The windward corner's separation angle was observed to decrease with an increase in radius, resulting in a narrower and longer recirculation region. Furthermore, with an increase in radius, a reduction in the fluctuating lift, mean drag, and fluctuating drag coefficients has been observed.

• 디자인학연구
• /
• 제14권4호
• /
• pp.179-188
• /
• 2001

전시공간은 인간 그리고 전시물에 대해 그 외형과 더불어 내재된 가치의 상호작용까지 고려해야 하므로 건축 및 실내건축의 설계, 전시 프로그램의 기획 조정, 전시공간에의 구체화, 운영 및 관리 등의 여러 가지 작업들이 조화를 이루어 형성되는 결과물이다. 그러므로 박람회의 전시공간은 축적된 가치의 산물들을 보유하는 장소로서의 기능 뿐 아니라 관람자와의 커뮤니케이션을 이룰 수 있는 기능적 역할을 수행하여야 한다. 그러므로 무역박람회 전시의 목적을 달성하기 위해서는 전시물의 특성, 전시내용, 전시 프로그램뿐만 아니라 전시장의 위치와 형태에 따른 효과적인 커뮤니케이tus 계획을 수립해야 한다. 무역박람회 전시매장의 전시공간은 그 위치에 따라 벽형, 모퉁이형, 머리형, 섬형, 양 입구형 5가지로 분류될 수 있으며, 이러한 위치에 따른 커뮤니케이션 계획은 수동적 커뮤니케이션 구역, 능동적 커뮤니케이션 구역, 집약적 커뮤니케이션 구역, 기능수행 구역으로 그 기능을 구분하여 계획해야 한다. 이와 같은 무역박람회 전시공간의 전시형태와 위치에 관련한 커뮤니케이션 계획을 통하여 성공적인 전시를 위한 내용과 방법을 모색할 수 있으며 무역박람회 전시의 목적을 달성할 수 있을 것이다.