• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.242-251
• /
• 2013

Recently, while global concern over offshore resources exploration and development is being increased rapidly, offshore plant industry is highlighted as an industry of high added value. Along with this global trend, domestic concern over offshore plant development is being increased as well. In the overseas case, a marine geotechnical survey guideline for confirming characteristics of seabed sediments is available at the time of installation of offshore plant but such guideline is not available in our country. In this study, survey techniques fit for domestic marine environment was applied according to overseas guideline at southern coastal area, Korea. Among the marine geophysical survey techniques being proposed abroad, magnetic survey and seabed photograph were excluded. However, highly reliable data analysis was enabled for marine geophysical survey, which includes in-situ coring investigation and laboratory soil test. In addition, continuous ocean current survey was included to find scour potential due to the current around the offshore plant. Although coring depth is not so deep, we predicted geological structure through the analysis of amplitude features of seismic data. Characteristics of seabed sediments cold be obtained regionally and directly through combined analysis of marine geophysical survey data and coring data.

• Tunnel and Underground Space
• /
• v.5 no.4
• /
• pp.336-346
• /
• 1995

Geotechnical Information System (GTIS) for efficient management of three dimensional borehole data has been developed. Some problems were raised during the input process of borehole data, and alternative solutions were sought. According to the previous geotechnical reports, there is no unified weathering classification scheme. A criterion, 100 times/30cm from SPT, was turned out inappropriate to the discrimination of weathered rock from weathered soil. It has also been suggested that weathered soil, weathered rock, soft rock, and hard rock should be defined as CW, HW, MW, and SW~fresh condition. For better comparison of RQD, the use of NX size coring is recommended for the whole area although BX size coring has been used in excavated area. The limit of drilling depth up to 1 m from the top of surface of hard rock should be extended to avoid possible wrong interpretation of rock head due to the existence of corestone. The input data were analysed by geostatistical methods. It is found that the range in semivariogram is about 300m, and the variance of gneiss is greater than that of granite. It is because the granite data analysed came from almost single uniform rock mass(i.e.Seoul granite), but gneiss data came from the rock mass(i.e. Gyeonggi gneiss complex experienced several metamorphic metamorphic processes.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.41-47
• /
• 2021

Purpose There are many cyclotrons compared to the land area of the Republic of Korea. Because GMP certification is required and the nuclear medicine test does not apply for insurance, the number of examinations for nuclear medicine is decreasing. Therefore, there is a high probability of early decommissioning of the cyclotron. However, we do not unusually perform the radioactivation evaluation on concrete that can be classified as radioactive waste during the decommissioning of the cyclotron. In this study, we aim to confirm the radioactivation in the concrete surface using Handheld Radionuclide Identification Devices (RIDs). Materials and Methods Because there is no cyclotron being decommissioning in the Republic of Korea, it was impossible to perform the coring of concrete for radioactivation analysis. In this study, we used the KIRAMS-13 and analyzed the concrete surface in the target direction in the cyclotron room. After setting the target direction as the center, radionuclides were measured for about five months at thirty points with vertical and horizontal intervals of 30 cm. We used the RIIDEye(Detector: NaI(Tl) detector, manufacturer: Thermo) in this study and set the measurement time per point to one day (24 hours). Results Co-60 and Cs-137 were detected in some measurement points, and we confirmed the radioactivity of Co-60 detected at the most points. As a result, we found that the radioactivity of Co-60 was high in the diagonal direction (from the lower-left direction to the upper right direction) based on the center of the target. However, we think it is impossible to apply the corresponding results to all cyclotrons because we performed the study using only one cyclotron. Conclusion In thirty measurement points, we could confirm the radioactive nuclides and the relative radioactivity using the results of portable nuclides analyzer. Therefore, we expect that we can use the portable nuclides analyzer to select the coring position of concrete during the decommissioning of the cyclotron. Also, if we secure the radioactivation data for several years, we expect to make a more accurate estimate of radioactive waste during the preparation period of decommissioning of the cyclotron.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.263-270
• /
• 2008

The Gas Hydrate Research and Development Organization (KGHDO) of Korea accomplished successfully geophysical logging (LWD: Logging While Drilling, MWD: Measurement While Drilling) for five sites in 2007, in order to investigate the presence of gas hydrate in the Ulleung Basin, the East Sea of Korea. The togging parameters acquired from LWD/MWD dre electrical resistivity, acoustic velocity, neutron density and porosity, and natural gamma. In addition, pressure, temperature, and diameter of borehole were measured. LWD/MWD data showed several evidences indicating the presence of gas hydrate. Based on LWD/MWD data, three coring sites were selected for sampling of gas hydrate. Subsequently, various gas hydrate samples were collected directly from three sites. Therefore. the presence of gas hydrates was verified by coring. LWD/MWD data will be significantly used to estimate the amount of gas hydrate. Also, they will provide important information to elucidate about sedimentologic characteristics of gas-hydrate bearing formation and sedimentary environment of the Ulleung Basin.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.97-104
• /
• 2001

The magnitude and the orientation of in-situ stresses contribute to ground displacement and stresses in the field of underground space. This paper investigates in-situ stresses at various depth on the basis of 392 data which were determined by over-coring and hydro-fracturing test methods in the Korea peninsula. The result shows that in-situ stress distribution are more or less non-uniform through the Granite and Gneiss sub-area, and that the K-value in the Volcanic sub-area are below 1 at the deep depth. Also, the result of three dimensional numerical analyses of tunnel shows that the direction and magnitude of displacement around tunnel are much effected by the stress difference between the maximum and the minimum horizontal stress.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.34-41
• /
• 2006

A 3-dimensional stress measurement system based on the bore hole bottom deformation method, which is one of the stress relief methods, was developed. A pilot bore hole is drilled from the bottom of a bore hole and the stress meter is inserted into the pilot bore hole in the method. The bore hole is advanced as an over coring and the deformations in seven directions are measured by cantilever type-sensors. Using the cantilever type-sensors saves time for hardening of glue. No cable connection between the stress meter and a data logger is necessary since a compact data logger is installed in the stress meter. The accuracy of the stress meter was confirmed by a biaxial test for a Shikotsu welded tuff block although in-situ tests have not been carried out yet.

• Proceedings of the Korean Quaternary Association Conference
• /
• 2004.06a
• /
• pp.51-51
• /
• 2004

As an important contribution to the planed drilling (IODP) in the central part of the Arctic Ocean, we are currently working on a refined chronostratigraphy for Marine Isotope Stage (MIS) 16 to MIS 2 on the exciting material from ODP Site 910A (Leg 151) which has been recovered from the marginal Eastern Arctic Ocean (the Yermak Plateau - the Atlantic/Arctic Ocean Gateway). Several stratigraphic age fix-points support the interpretation of the stable oxygen. isotope record of planktonic foraminifer N, pachyderma sin. that is punctuated by several short-term meltwater events. We believe that our new record will serve as 'the important correlating tool for establishing a basic stratigraphy for the Quaternary Arctic Ocean as well as for generating high-resolution paleoenvironmental reconstructions in the central Arctic Ocean. Furthermore, our study will provide reference stratigraphic data sets for interpreting the micropaleontological, sedimentological and organic / inorganic - geochemical proxies of the new boreholes that will be drilled on the Lomonosov Ridge(Central Arctic Ocean) in the frame of the "Arctic Coring Expedition' (ACEX, IODP) in summer 2004.

• Korean Journal of Human Ecology
• /
• v.13 no.6
• /
• pp.847-860
• /
• 2004

The purpose of this study is to obtain basic data needed to understand school-age children's parent-child communication style, stress coping behaviors, and child behavior problems. The subject of this study were 362 primary school children (the fourth and the sixth graders) and their mothers in "D" Metropolitan City, Korea. The research tools included standardized parent-child communication style scale (Min,l991), stress coping behaviors scale (Min,1998), and child behavior problems scale (Hun,l996). The data were analyzed using statistical techniques such as Mean, standard deviation, frequency, percentile, t-test, F-test, pearson's correlational analysis, stepwise regression analysis. In the relationship between child perceived parent-child communication style and stress coping behaviors, the children who make open communication with their parents demonstrate high problem-solving, support-seeking coping behavior. The children with closed communication with their parents have high hope expectation, revenge coping behavior. In the relationship between child perceived parent-child communication style and child behavior problem, the children making more closed communication with their parents show more behavior problems. The children with more closed communication with their mothers have more hyperactive behaviors, aggressive behaviors, and immature behaviors, and the children who are making more closed communication retain more anxious behaviors and withdrawn behaviors. In the relationship between child stress coping behaviors and behavior problems, the more problem-solving and support-seeking coping behaviors the children possess, the less problem behaviors they demonstrate. The more hope expectation, revenge coping behavior the children possess, the more problem behaviors they show. With the results above, we can find out that parent-child communication style has an effect on stress coping behavior, and parent-child communication style and stress coping behavior have an influence on child behavior problem.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.165-173
• /
• 2009

The physical properties of a seafloor sediment have been used as a basic data for the ocean survey. Conventional methods such as a coring, a drilling, and a grabbing have been used to explore the physical properties but these methods have a number of shortcomings as it is time consuming, expensive and spatially limited. To overcome these limitations, seafloor sediment classification using acoustic signals has been studied actively. In this paper, we obtained the backscattered signal from the seafloor sediment using an echo sounder which is one kind of seafloor topography equipment. Nakagami probability density function of the backscattered signals from the seafloor sediment was computed and a Nakagami parameter was compared with the physical properties of the seafloor sediment. We have confirmed that Nakagami parameter, m is correlated with the physical properties of a seafloor sediment. This study will be utilized as a basic data of the seafloor sediment research.

• Journal of The Korean Association For Science Education
• /
• v.43 no.3
• /
• pp.237-251
• /
• 2023

This study explores the possibility of automated scoring for scientific graph answers by designing an automated scoring model using convolutional neural networks and applying it to students' kinematics graph answers. The researchers prepared 2,200 answers, which were divided into 2,000 training data and 200 validation data. Additionally, 202 student answers were divided into 100 training data and 102 test data. First, in the process of designing an automated scoring model and validating its performance, the automated scoring model was optimized for graph image classification using the answer dataset prepared by the researchers. Next, the automated scoring model was trained using various types of training datasets, and it was used to score the student test dataset. The performance of the automated scoring model has been improved as the amount of training data increased in amount and diversity. Finally, compared to human scoring, the accuracy was 97.06%, the kappa coefficient was 0.957, and the weighted kappa coefficient was 0.968. On the other hand, in the case of answer types that were not included in the training data, the s coring was almos t identical among human s corers however, the automated scoring model performed inaccurately.