• 한국정보과학회논문지:정보통신
• /
• 제30권3호
• /
• pp.424-436
• /
• 2003

본 논문에서는 공유 트리에 기반에서 IP 멀티캐스팅을 위한 센트로이드 기반 백본코아트리 (Centroid-based Backbone Core Tree: CBCT) 생성 알고리즘을 제안한다 코아기반트리(Core Based Tree: CBT)는 공유 트리를 이용하여 멀티캐스트 자료를 전달하는 것으로 소스 기반 트리에 비하여 각 라우터가 유지해야 하는 상태 정보의 양이 적고, 적용하기 간단한 장점을 가지고 있지만, 코아 라우터(Core router) 선택이 어렵고, 멀티캐스트 트래픽이 코아로 집중되는 문제점을 가지고 있다. 백본코아트리(Backbone Core Tree: BCT)는 CBT의 단점을 보완하기 위해 제안되었다. BCT는 각 멀티캐스트 그룹마다 특정한 코아 라우터를 선정하지 않는 대신 코아라우터 후보들을 백본코아트리(BCT)로 연결하고, 이 트리를 통하여 코아라우터 후보들이 서로 협동하므로써 위의 두 가지 문제점을 해결한다. 이때 BCT를 어떻게 구성하는가에 따라 멀티캐스트 성능이 크게 변하게 된다. 본 논문에서는 백본코아라우터 후보들 및 이들을 연결하는 BCT를 생성하기 위해 네트워크의 최소 신장 트리와 센트로이드를 이용하는 효율적인 알고리즘 CBCT를 제시한다. 제안된 알고리즘의 성능평가를 위해서 CBT와 CBCT 프로토콜의 성능비교 결과를 보인다.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.783-792
• /
• 2018

This paper presents a detailed theoretical study of the sleeved compression members based on a mechanical model. In the mechanical model, the core protrusion above sleeve and the contact force between the core and sleeve are specially taken into account. Via the theoretical analyses, load-displacement relationships of the sleeved compression members are obtained and verified by the experimental results. On the basis of the core moment distribution changing with the increase of the applied axial load, failure mechanism of the sleeved compression members is assumed and proved to be consistent with the experimental results in terms of the failure modes and the ultimate bearing capacities. A parametric study is conducted to quantify how essential factors including the core protrusion length above sleeve, stiffness ratio of the core to sleeve, core slenderness ratio and gap between the core and sleeve affect the mechanical behaviors of the sleeved compression members, and it is concluded that the constrained effect of the sleeve is overestimated neglecting the core protrusion; the improvement of ultimate bearing capacity for the sleeved compression member is considered to be decreasing with the decrease of the core slenderness ratio and for the sleeved compression member with core of small slenderness ratio, small gap and small stiffness ratio are preferred to obtain larger ultimate bearing capacity and stiffness.

• 경영과학
• /
• 제34권2호
• /
• pp.35-56
• /
• 2017

Technology innovations have been accelerating changes across industries and intensifying competition. Enterprises are therefore required to continuously secure their internal and external competitiveness. Based on the principle that core competencies of a firm are essential to its competitiveness, many research studies have been conducted to figure out the effect of core competencies to business performance. However, individual research works considered a part of core competencies or limited to a specific industry, which means that their findings may differ when additional core competencies are included in their analysis. After re-establishing the definition of each core competency from literature review, this study comprehensively investigated the effect relationship among core competencies and business performance. Structural equation modeling and multiple regression analysis with 421 survey respondents from various industries were conducted for our empirical study.

• 한국재료학회지
• /
• 제26권1호
• /
• pp.17-21
• /
• 2016

Pt@Cu/C core-shell catalysts were successfully prepared by impregnation of a carbon support with copper precursor, followed by transmetallation between platinum and copper. The Pt@Cu/C core-shell catalysts retained a core of copper with a platinum surface. The prepared catalysts were used for hydrogen production through catalytic dehydrogenation of decalin for eventual application to an onboard hydrogen supply system. Pt@Cu/C core-shell catalysts were more efficient at producing hydrogen via decalin dehydrogenation than Pt/C catalysts containing the same amount of platinum. Supported core-shell catalysts utilized platinum highly efficiently, and accordingly, are lower-cost than existing platinum catalysts. The combination of impregnation and transmetallation is a promising approach for preparation of Pt@Cu/C core-shell catalysts.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.249-256
• /
• 2007

Light water reactors operated under supercritical pressure conditions have been selected as one of the promising future reactor concepts to be studied by the Generation IV International Forum. Whereas the steam cycle of such reactors can be derived from modem fossil fired power plants, the reactor itself, and in particular the reactor core, still need to be developed. Different core design concepts shall be described here to outline the strategy. A first option for near future applications is a pressurized water reactor with $380^{\circ}C$ core exit temperature, having a closed primary loop and achieving 2% pts. higher net efficiency and 24% higher specific turbine power than latest pressurized water reactors. More efficiency and turbine power can be gained from core exit temperatures around $500^{\circ}C$, which require a multi step heat up process in the core with intermediate coolant mixing, achieving up to 44% net efficiency. The paper summarizes different core and assembly design approaches which have been studied recently for such High Performance Light Water Reactors.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.67-73
• /
• 2007

A sandwich plate with a truss core is composed of two face sheets and a pyramidal truss core between face sheets. This paper shows how to estimate the shear modulus of a truss core, experimentally. To determine the shear modulus of truss cores, 3-point bending tests are performed. For tests, metallic sandwich beams with truss cores are fabricated. Two kinds of truss cores are tested to investigate the shear modulus. Each test is repeated under different widths in order to increase accuracy. As a result, the shear modulus of sandwich beam is properly calculated. The deflection of a sandwich beam with a truss core by shear deformation takes the major contribution of the total deflection and the shear modulus of sandwich beam should be considered whenever it is designed.

• The Journal of Advanced Prosthodontics
• /
• 제9권3호
• /
• pp.232-237
• /
• 2017

Dentists often place post and core buildups on endodontically treated abutments for crown and bridge restorations. This article analyzes the bio-mechanical purposes, advantages and disadvantages of placing a core or a post and core in an endodontically treated tooth and reviews literature on post and core biomechanics. The author assesses the scientific rationale of the claim that the main purpose of a post is to retain a core, or the claim that posts weaken teeth. More likely, the main function of a post is to help prevent the abutment, on which a crown is cemented, from fracturing such that the abutment separates from the tooth root, at a fracture plane that is located approximately and theoretically at the level of the crown (or ferrule) margin. A post essentially improves the ferrule effect that is provided by the partial fixed denture prosthesis. This paper also explores the difference between bio-mechanical failures of crowns caused by lack of retention or excess taper, versus failures due to a sub-optimal ferrule effect in crown and bridge prostheses.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.467-482
• /
• 2022

One of the major failure modes in composite sandwich structures is the separation between skins and core. In this study, the effect of employing foam filled composite corrugated core on the skin/core debonding (resistance to separation between skin and core) is investigated both experimentally and numerically. To this aim, triangular corrugated core specimens are manufactured and compared with reference specimens only made of PVC foam core in terms of skin/core debonding under bending loading. The corrugated composite laminates are fabricated using the hand layup method. Also, the Vacuumed Infusion Process (VIP) is employed to join the skins to the core with greater quality. Utilizing an End Notched Shear (ENS) fixture, three point bending tests are performed on the manufactured sandwich composite panels. The results reveal that the resistance to separation capacity and flexural stiffness of sandwich composite has been increased about 170% and 76%, respectively by using a triangular corrugated core. The Cohesive Zone Model (CZM) with appropriate cohesive law in ABAQUS finite element software is used to model the progressive face/core interfaces debonding the difference between experimental and numerical results in predicting the maximum born load before the skin/core separation is about 6 % in simple core specimens and 3% in triangular corrugated core specimens.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.262-265
• /
• 2003

During magnetic inrush or over-excitation saturation of the core in a transformer draws a large exciting current. This can cause mal-operation of a differential relay. This paper proposes a modified current differential relay for transformer protection. In order to cope with the remanent flux at the beginning. the start of saturation of the core is detected and the core flux at the instant is estimated by inserting the differential current into a magnetization curve. Then, this core flux value can be used to calculate the core flux. The proposed relay calculates the core-loss current from the induced voltage and the core-loss resistance; the relay calculates the magnetizing current from the core flux and the magnetization curve. Finally, the relay obtains the modified differential current by subtracting the core-loss current and the magnetizing current from the conventional differential current. The proposed technique not only discriminates magnetic inrush and over-excitation from an internal fault, but also improves the speed of the conventional relay.

• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1448-1455
• /
• 2008

본 논문은 대부분의 Linux 운영체제에서 지원해 주는 System V의 IPC 중 하나인 Shared Memory를 Dual Core 시스템 상에서 동작하도록 설계한다. Linux에서 사용되는 Shared Memory는 동일한 메모리 영역에 여러 개의 프로세스가 접근할 수 있도록 해 주는 기술이 다. 본 논문에서는 Shared Memory의 큰 두 갈래 중 커널 단계에서 처리되는 SVR(System V Release) 형식의 Shared Memory를 다룬다. 본 논문에서는 리눅스 운영체제의 공유 메모리 기능을 Dual Core 시스템에서 동작하도록 설계한다. 본 논문에서 제안하는 Dual Core 시스템에서 공유 메모리 기능 설계 방안은 듀얼 코어를 활용하여 기존의 단일 처리기 시스템에서보다 성능을 향상시킬 수 있도록 한다. 공유 메모리를 이용한 프로세스의 동작이 별개의 CPU에서 동작되도록 함으로써 성능 향상을 꾀한다.