• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.323-330
• /
• 2009

Electrical resistivity survey is applied for estimation of inferred fault and fractured zone in civil engineering and environment field. While 15 m diameter and 3 lines tunnels are excavated. It is recognized that core stone and fractured zone is existed in the weathered slope of the entrance to a tunnel. To make confirmation geological characteristics, dipole-dipole electric resistivity survey was carried out in weathered slope of the entrance to a tunnel. Core stone distribution and fracture zone characteristics are estimated by reverse analysis and 2D-resistivity structure using FDM.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.181-186
• /
• 2015

In this study, the effect of the friction stir welding (FSW) was compared with that of the gas tungsten arc welding (GTAW) on the microstructure and microhardness of Cu-Ni alloy weldment. The weldment of 10 mm thickness was fabricated by FSW and GTAW, respectively. Both weldments were compared with each other by optical microstructure, microhardness test and grain size measurement. Results of this study suggest that the microhardness decreased from the base metal (BM) to the heat affected zone (HAZ) and increased at fusion zone (FZ) of GTAW and stir zone (SZ) of FSW. the minimum Hv value of both weldment was obtained at HAZ, respectively, which represents the softening zone, whereas Hv value of FSW weldment was little higher than that of GTAW weldment. These phenomena can be explained by the grain size difference between HAZs of each weldment. Grain size was increased at the HAZ during FSW and GTAW. Because FSW is a solid-state joining process obtaining the lower heat-input generated by rotating shoulder than heat generated in the arc of GTAW.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.70-75
• /
• 2012

In this study, effect of nitrogen volume in the shielding gas of Ar-$N_2$ mixing gas on the bead shape, hardness and microstructure of GTA welds of 3mm thick Commercial Pure Ti was investigated. As the nitrogen volume increased, the welding current for full penetration was reduced and hardness in the fusion zone significantly increased compared with that of the base metal, but there is no difference in the hardness of HAZ. Microstructure in the fusion zone with pure Ar gas changed from equiaxed alpha of the base metal to serrated alpha. On the other hand, microstructure using Ar-$N_2$ mixing gas changed to acicular alpha. With the increasing of nitrogen content, the amount of acicular alpha increased and the size of that was fine.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.3
• /
• pp.92-103
• /
• 1979

The compaction of core zone of the fill dam is very important foe increasing of the Strength of soil mass and reduction of permeability of the core. The principal objects of this study are to give the construction criteria of tamping rollers and to find out the relationships between density and permeability of soil after compaction. The results in this study are summarized as follows. 1. The core zone of fill dam should be compacted more than 8 passed because the compaction effects of clayey soil increase sharply in about 8 passes of roller. 2. The coefficient of permeability (K) increases with the thickness of compaction of soil even though the density is same. 3. The effect of compaction increases with the quantity of coarse materials such as coarse sand and gravel. 4. If D values change from 100 percent to 98 percent and from 100 percent to 95 percent, K values become 2 times and 5 times of initial K value respectively. 5. The coefficient of permeability in the field soil is very high comparing with the result of laboratory test at the same 100 percent compaction ratio, but differences between both results decrease with the decrease of compaction ratio. 6. Thickness of soil layer for the compaction should be increased for heavier compaction machine. 7. In order to get the compaction ratio of 98 percent or more, 10 to 12 passes of roller is generally required with the thickness of soil from 20cm to 30cm.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1969-1972
• /
• 2008

In this study, horse spleen apoferritins were induced to form biominerals using up to 3000 Fe atoms per protein molecule. The morphology and crystallinity of the nanometer-sized biominerals formed in the ferritins were then analyzed using field emission-energy filtering-transmission electron microscopy (FE-TEM). The ferritins were found to have reconstitution yields of 60-70% in the experiments. The mean core size of the ferritins varied somewhat with protein concentrations, indicating that crystal growth in ferritins could be controlled via protein concentrations. The core mineral size increased with the amount of Fe used. Lattice fringes of the core, associated with good crystallinity, were found in all samples. The lattice fringe images of a single domain ferrihydrite mineral appeared frequently in the (011) planes (d-spacing of 0.246 nm) under [100] zone axis in all samples of this study. In addition, the lattice image occasionally revealed fringes corresponding to the (100) planes (d = 0.254 nm) from the [001] zone axis, indicating the characteristic pattern of hexagonal crystal lattice. Diffraction patterns in the minerals identified as ferrihydrite were fitted well into the space group of $P3_{1c}$.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3517-3527
• /
• 2021

New 80-MW (electric) ultra-long-life sodium cooled fast reactor core having inherent safety characteristics is designed with heterogeneous fuel assemblies comprised of driver and blanket fuel rods. Several options using upper sodium plenum and SSFZ (Special Sodium Flowing Zone) for reducing sodium void reactivity are neutronically analyzed in this core concept in order to improve the inherent safety of the core. The SSFZ allowing the coolant flow from the peripheral fuel assemblies increases the neutron leakage under coolant expansion or voiding. The Monte Carlo calculations were used to design the cores and analyze their physics characteristics with heterogeneous models. The results of the design and analyses show that the final core design option has a small burnup reactivity swing of 618 pcm over ~54 EFPYs cycle length and a very small sodium void worth of ~35pcm at EOC (End of Cycle), which leads to the satisfaction of all the conditions for inherent safety with large margin based on the quasi-static reactivity balance analysis under ATWS (Anticipated Transient Without Scram).

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.7
• /
• pp.41-52
• /
• 2022

This paper analyzes the advantages and opportunities of regional development prospects of the China (Anhui) Pilot Free Trade Zone. In addition, it provides suggestions for the future development of the Anhui Pilot Free Trade Zone. The establishment of the Anhui Pilot Free Trade Zone is a major platform for Anhui Province, China, to serve the nation's opening-up strategy to the world and an opportunity for the Anhui region to enhance the level of an open economy. The development plan points out that the Anhui Pilot Free Trade Zone 1) takes institutional innovation as the core, 2) complies with the requirements of the innovation-driven development and promotion of the Yangtze River Delta regional integration development strategy, and 3) plays a vital node role in promoting the construction of the Belt and Road Initiative, and 4) accelerates the construction of scientific and technological innovation sources, advanced manufacturing and strategic emerging industries. The findings of this study highlight three critical achievements as follows: 1) optimization and improvement of the business environment have progressed, 2) the conversion rate of scientific and technological innovation achievements has increased, and 3) advanced high-tech manufacturing and strategic emerging industries are clustered and developed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.191-198
• /
• 2014

In this paper, structural integrity evaluation of reactor pressure vessel bottom head without penetration nozzles in core melting accident has been performed. Considering the analysis results of thermal load, weight of molten core debris and internal pressure, thermal load is the most significant factor in reactor vessel bottom head. The failure probability was evaluated according to the established failure criteria and the evaluation showed that the equivalent plastic strain results are lower than critical strain failure criteria. Thermal-structural coupled analyses show that the existence of elastic zone with a lower stress than yield strength is in the middle of bottom head thickness. As a result of analysis, the elastic zone became narrow and moved to the internal wall as the internal pressure increases, and it is evaluated that the structural integrity of reactor vessel is maintained under core melting accident.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.63-73
• /
• 2014

In this study, the large scale test was performed to investigate the behavior of failure on the embankment and spillway transitional zone by overtopping. The pore water pressure, earth pressure, settlement and failure behaviors according to several reinforcing method were compared and analyzed. The pore water pressure showed a small change in the spillway transition zone and core, indicating that the riprap and geotextile efficiently reinforced the embankment, but non-reinforcement showed a largely change in pore water pressure. The earth pressure by riprap and geotextile at upstream slope and bottom core increased rapidly with the infiltration of the pore water by overtopping. And the earth pressure at crest showed a smally change due to effect of the inclined core. A settlement by riprap showed a small change and the geotextile decreased a rapidly due to failure of crest. The width of failure by riprap at intermediate stage (50 min) showed a largely due to sliding of crest. But, the width and depth of the seepage erosion after the intermediate overtopping period (100 min) were very small due to the effect of riprap than geotextile and non-reinforcement which delayed failure. It has the effect that protect reservoir embankment from erosion in the central part. The pore water pressure at the spillway transition zone due to overtopping increased a rapidly in the case of non-reinforcement, but the reinforced methods by geotextile and riprap showed a smally change. Therefore, the reinforced method by riprap and geotextile was a very effective method to protect permanently and the emergency an embankment due to overtopping, respectively.

• Korean Journal of Environment and Ecology
• /
• v.18 no.2
• /
• pp.158-166
• /
• 2004

For the zoning of natural ecosystem, Vegetation Index is calculated from the vegetation data surveyed on Baekdudaegan (from Namdeogyusan to Sosagogae). Five factors-biodiversity, conservation value of the stand, environmental quality, longevity of the stand, site productivity- are considered in the calculation of Vegetation Index. Vegetation Index might be a useful zoning tool for management of Baekdudaegan. For Vegetation Index I, 8 sample plots 12.l％ of total 66 sample plots are belong to core area, 21 sample plots 31.8％ and 37 sample plots 56.l％ are belong to buffer zone and transition area, respectively. For Vegetation Index II, 37 sample plots 41.9% of total 60 sample plots are belong to core area, 19 sample plots 28.8％ and 19 sample plots 28.8% are belong to buffer zone and transition area, respectively.