• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2017년도 임시총회 및 하계학술연구발표회
• /
• pp.217-217
• /
• 2017

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.96.1-96.1
• /
• 2007

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.38-42
• /
• 2016

$BaTiO_3$-coated Fe nanofibers are synthesized via a three-step process. ${\alpha}-Fe_2O_3$ nanofibers with an average diameter of approximately 200 nm are first prepared using an electrospinning process followed by a calcination step. The $BaTiO_3$ coating layer on the nanofiber is formed by a sol-gel process, and a thermal reduction process is then applied to the core-shell nanofiber to selectively reduce the ${\alpha}-Fe_2O_3$ to Fe. The thickness of the $BaTiO_3$ shell is controlled by varying the reaction time. To evaluate the electromagnetic (EM) wave-absorbing abilities of the $BaTiO_3@Fe$ nanofiber, epoxy-based composites containing the nanofibers are fabricated. The composites show excellent EM wave absorption properties where the power loss increases to the high frequency region without any degradation. Our results demonstrate that the $BaTiO_3@Fe$ nanofibers obtained in this work are attractive candidates for electromagnetic wave absorption applications.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.1068-1075
• /
• 2012

압출성형을 통한 core/shell 구조를 갖는 폴리부틸렌테레프탈레이트(PBT)/Nylon6,12 미세모를 제조함에 있어 최적의 압출조건을 규명하기 위하여, 압출온도와 배합비를 다르게 하여 제조한 블렌드 미세모의 상용성을 SEM 모폴로지와 DSC 분석을 통해 확인하고 UTM을 통해 압출속도에 따른 기계적 물성의 변화를 측정하였다. SEM 모폴로지 분석결과 압출온도가 증가할수록 분산상인 Nylon6,12 비드의 크기가 감소하였으며, Nylon6,12의 함량이 증가할수록 PBT 매트릭스 내 Nylon6,12의 상분리 현상이 감소하였다. DSC 분석 결과도 같은 경향을 나타냈는데, 압출온도가 상승함에 따라 녹는점에 해당하는 피크들의 경계가 사라지고, Nylon6,12의 비율이 증가할수록 두 피크의 간격이 좁아지는 것을 확인할 수 있었다. 한편 PBT/Nylon6,12 블렌드 미세모의 인장강도와 연신율 및 굴곡강도와 굴곡탄성률 모두 압출온도가 $260^{\circ}C$ 일 때까지 증가하였으나 그 이상의 온도에서는 오히려 감소하였다. $260^{\circ}C$에서의 인장강도와 연신율, 굴곡강도, 굴곡탄성률은 각각 560 $kg_f/cm^2$와 220%, 807 $kg_f/cm^2$, 22,146 $kg_f/cm^2$였는데 이는 PBT와 Nylon6,12의 중간 값을 상회하는 수치로 두 물질이 압출성형에 의한 블렌드 효과가 있다는 것을 확인할 수 있었다. 이처럼 우수한 상용성을 보일 때의 블렌드 압출 조건들을 토대로 하여 core/shell 구조의 이중구조 미세모를 제조하였다.

• 한국재료학회지
• /
• 제14권7호
• /
• pp.511-515
• /
• 2004

Fe nano powders were synthesized by plasma arc discharge (PAD) process and studied by means of X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). Pure Fe rod($99.9\%$) was used as a source of metallic vapor under argon and hydrogen mixed atmosphere. The synthesized Fe nano powders had nearly spherical shapes and core-shell type structures. The influence of process parameters on the structure and size was investigated. The powder size increased with increasing of the chamber pressure and input current. High hydrogen gas ratio in chamber atmosphere affected the particle size and amount of Fe nanopowder.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.85-90
• /
• 1994

The flow properties of binder latices for paper coating were investigated, together with dynamic viscoelastic properties of latex films and electron micrographs of latices, under various conditions. The amphoteric latex, binder pigment latex and anionic latex were used in this work. The amphoteric latex has both anionic and cationic functional group on its surface. The binder-pigment with a core-shell structure has dual functions : plastic pigment and binder. The low shear viscosity of binder latices and clay slurry were measured with Brookfield vis cometer. At low-shear rates. the viscosity decreased with increasing particle size of latex. On the amphoteric latex surface, the carboxyl groups are assumed to be fully dissociated over the region of pH 9~12, but the density of negative groups seems to be increased because of the gradual decrease in the degree of dissociation of amino groups. Since the apparent particle size of latex increases with surface charge, the electroviscous effect can be observed. On the anionic latex surface, the charge density is assumed to be nearly constant above pH 8. However, below pH 8 the coagulation of particles could be observed probably because of the decrease in the charge density.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.229-234
• /
• 2006

Poly(vinyl acetate) (PVAc)/poly(vinyl alcohol) (PVA)/montmorillonite (MMT) clay nanocomposite microspheres with a core/shell structure have been developed via a suspension polymerization approach. In order to prepare the PVAc/ MMT and PVAc/PVA/MMT nanocomposite microspheres, which are promising precursor of PVA/MMT nanocomposite microspheres, suspension polymerization of vinyl acetate with organophilic MMT and heterogeneous saponification were conducted. A quaternary ammonium salt, cetyltrimethylammonium bromide, was mixed with the MMT in the monomer phase prior to the suspension polymerization. The rate of conversion decreased with an increase in MMT concentration. The incorporation of MMT into the PVAc was verified by FT-IR spectroscopy. Organic vinyl acetate monomers were intercalated into the interlayer regions of organophilic clay hosts and followed by suspension polymerization. Partially saponified PVA/MMT nanocomposite microspheres with a core/shell structure were successfully prepared by heterogeneous saponification.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.93-109
• /
• 2019

In the present study, vibration analysis of double bonded micro sandwich cylindrical shells with saturated porous core and carbon/boron nitride nanotubes (CNT/BNNT) reinforced composite face sheets under multi-physical loadings based on Cooper-Naghdi theory is investigated. The material properties of the micro structure are assumed to be temperature dependent, and each of the micro-tubes is placed on the Pasternak elastic foundations, and mechanical, moisture, thermal, electrical, and magnetic forces are effective on the structural behavior. The distributions of porous materials in three distributions such as non-linear non-symmetric, nonlinear-symmetric, and uniform are considered. The relationship including electro-magneto-hydro-thermo-mechanical loadings based on modified couple stress theory is obtained and moreover the governing equations of motion using the energy method and the Hamilton's principle are derived. Also, Navier's type solution is also used to solve the governing equations of motion. The effects of various parameters such as material length scale parameter, temperature change, various distributions of nanotube, volume fraction of nanotubes, porosity and Skempton coefficients, and geometric parameters on the natural frequency of double bonded micro sandwich cylindrical shells are investigated. Increasing the porosity and the Skempton coefficients of the core in micro sandwich cylindrical shell lead to increase the natural frequency of the structure. Cylindrical shells and porous materials in the industry of filters and separators, heat exchangers and coolers are widely used and are generally accepted today.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.57-74
• /
• 2021

The thermal eigenvalue responses of the graded sandwich shell structure are evaluated numerically under the variable thermal loadings considering the temperature-dependent properties. The polynomial type rule-based sandwich panel model is derived using higher-order type kinematics considering the shear deformation in the framework of the equivalent single-layer theory. The frequency values are computed through an own home-made computer code (MATLAB environment) prepared using the finite element type higher-order formulation. The sandwich face-sheets and the metal core are discretized via isoparametric quadrilateral Lagrangian element. The model convergence is checked by solving the similar type published numerical examples in the open domain and extended for the comparison of natural frequencies to have the final confirmation of the model accuracy. Also, the influence of each variable structural parameter, i.e. the curvature ratios, core-face thickness ratios, end-support conditions, the power-law indices and sandwich types (symmetrical and unsymmetrical) on the thermal frequencies of FG sandwich curved shell panel model. The solutions are helping to bring out the necessary influence of one or more parameters on the frequencies. The effects of individual and the combined parameters as well as the temperature profiles (uniform, linear and nonlinear) are examined through several numerical examples, which affect the structural strength/stiffness values. The present study may help in designing the future graded structures which are under the influence of the variable temperature loading.

• 공업화학
• /
• 제29권6호
• /
• pp.710-715
• /
• 2018

본 연구에서는 자성을 이용하여 재수득이 가능한 광 촉매 물질인 $ZnFe_2O_4@SnO_2@TiO_2$ core-shell nanoparticles (NPs)를 3단계 과정을 통해 합성하였다. 구조적 특성은 X-ray diffraction (XRD) 분석으로 확인하였다. Spinel 구조의 $ZnFe_2O_4$와 tetragonal 구조의 $SnO_2$와 anatase 구조의 $TiO_2$가 합성된 것을 확인하였다. 합성한 물질의 자기적 성질은 vibrating sample magnetometer (VSM)으로 확인하였다. Core 물질인 $ZnFe_2O_4$의 포화자화 값은 33.084 emu/g으로 확인하였다. $SnO_2$와 $TiO_2$층의 형성의 결과, 두께 증가로 인한 자성은 각각 33, 40% 감소하였으나 재수득이 가능한 충분한 자성을 가지는 것을 확인하였다. 합성된 물질의 광 촉매 효율은 methylene blue (MB)를 사용하여 측정하였다. Core 물질의 효율은 4.2%로 확인하였고 $SnO_2$와 $TiO_2$ shell 형성의 결과 각각 73%와 96%로 증가하였고 높은 광 촉매 효율을 가지는 것을 확인하였다. 또한 항균 특성은 대장균(E. Coli)과 황색포도상구균(S. Aureus)을 사용하여 억제 영역을 확인하였다. Shell이 형성되면서 더 넓은 억제 영역이 형성되었고 이는 광 촉매 효율을 측정한 결과와 일치하는 것을 확인하였다.